Yttrium (Y)
transition-metalSolid
प्रमाणित अणुभार
88.90584 uइलेक्ट्रॉन संरूपण
[Kr] 5s2 4d1द्रवणांक
1521.85 °Cउत्कलनांक
3344.85 °Cघनता
4470 kg/m³ऑक्सिडीकरण अवस्था
0, +1, +2, +3विद्युतऋणता (पॉलिंग)
1.22आयनीकरण ऊर्जा (पहिली)
6.21726 eVशोधाचे वर्ष
1794अणुत्रिज्या
180 pmतपशील
Yttrium is a silvery transition metal grouped with the rare-earth elements because it commonly occurs with lanthanides and forms predominantly trivalent cations. Its chemistry is close to the heavier lanthanides, especially holmium and erbium, rather than to scandium. Although not itself a lanthanide, yttrium is a key component of phosphors, ceramics, lasers, and high-temperature oxide materials.
Yttrium has a silver-metallic luster and is relatively stable in air. Turnings of the metal, however, ignite in air if their temperature exceeds 400°C. Finely divided yttrium is very unstable in air.
The name derives from the Swedish village of Ytterby where the mineral gadolinite was found. In 1794, the Finnish chemist Johan Gadolin discovered yttrium in the mineral ytterbite, which was later renamed gadolinite for Gadolin. Gadolin originally called the element ytterbium after ytterbite. The name was subsequently shortened to yttrium, and later another element was given the name ytterbium.
Yttrium was discovered by Johan Gadolin, a Finnish chemist, while analyzing the composition of the mineral gadolinite ((Ce, La, Nd, Y)2FeBe2Si2O10) in 1789. Gadolinite, which was named for Johan Gadolin, was discovered several years earlier in a quarry near the town of Ytterby, Sweden. Today, yttrium is primarily obtained through an ion exchange process from monazite sand ((Ce, La, Th, Nd, Y)PO4), a material rich in rare earth elements.
Namded after Ytterby, a village in Sweden near Vauxholm. Yttria earth containing yttrium was discovered by Gadolin in 1794. Ytterby is the site of a quarry which yielded many unusual minerals containing rare earths and other elements. This small town, near Stockholm, bears the honor of giving names to erbium, terbium, and ytterbium as well as yttrium.
In 1843 Mosander showed that yttira could be resolved into the oxides (or earths) of three elements. The name yttria was reserved for the most basic one; the others were named erbia and terbia.
Pure yttrium is a soft, silvery-white metal with a metallic luster. It is reasonably stable in dry air at room temperature because a thin oxide film forms, but finely divided metal is more reactive and can ignite when heated.
Yttrium is used mainly through its compounds and oxide ceramics. Yttrium oxide, Y₂O₃, is a host and stabilizer in red phosphors, optical ceramics, and refractory materials. Yttrium aluminum garnet, Y₃Al₅O₁₂, is the host crystal for Nd:YAG lasers. Yttria-stabilized zirconia is used in oxygen sensors, thermal-barrier coatings, and solid oxide fuel cells. Small additions of yttrium improve oxidation resistance and grain behavior in some alloys.
Although metallic yttrium is not widely used, several of its compounds are. Yttrium oxide (Y2O3) and yttrium orthovanadate (YVO4) are both combined with europium to produce the red phosphor used in color televisions. Garnets made from yttrium and iron (Y3Fe5O12) are used as microwave filters in microwave communications equipment. Garnets made from yttrium and aluminum (Y3Al5O12) are used in jewelry as simulated diamond.
Yttrium oxide is one of the most important compounds of yttrium and accounts for the largest use. It is widely used in making YVO4 europium, and Y2O3 europium phosphors to give the red color in color television tubes. Hundreds of thousands of pounds are now used in this application.
Yttrium oxide also is used to produce yttrium-iron-garnets, which are very effective microwave filters.
Yttrium iron, aluminum, and gadolinium garnets, with formulas such as Y3Fe5O12 and Y3Al5O12, have interesting magnetic properties. Yttrium iron garnet is also exceptionally efficient as both a transmitter and transducer of acoustic energy. Yttrium aluminum garnet, with a hardness of 8.5, is also finding use as a gemstone (simulated diamond).
Small amounts of yttrium (0.1 to 0.2%) can be used to reduce the grain size in chromium, molybdenum, zirconium, and titanium, and to increase strength of aluminum and magnesium alloys.
Alloys with other useful properties can be obtained by using yttrium as an additive. The metal can be used as a deoxidizer for vanadium and other nonferrous metals. The metal has a low cross section for nuclear capture. 90Y, one of the isotopes of yttrium, exists in equilibrium with its parent 90Sr, a product of nuclear explosions. Yttrium has been considered for use as a nodulizer for producing nodular cast iron, in which the graphite forms compact nodules instead of the usual flakes. Such iron has increased ductility.
Yttrium also can be used in laser systems and as a catalyst for ethylene polymerization reactions.
It also has potential use in ceramic and glass formulas, as the oxide has a high melting point and imparts shock resistance and low expansion characteristics to glass.
Isotopes in Medicine
Carbon nanotubes (CNT), which are nano-scaled carbon tubes, are being examined in nanobiotechnology research studies because it has been discovered that CNTs labeled with 86Y (with a half-life of 0.6 day) are soluble when they are injected into mice. This discovery was made after mice were given an intravenous or intraperitoneal (directly into a body cavity) injection with the 86Y CNT and then were examined using positron emission tomography (PET) scans to observe whether the 86Y had been flushed from their systems. The PET scan determined that accumulation of 86Y occurred in the liver, kidney, and spleen with very rapid blood clearance. This has broad implications for developing drug treatments [303] M. R. McDevitt, D. Chattopadhyay, J. S. Jaggi, R. D. Finn, P. B. Zanzonico, C. Villa, D. Rey, J. Mendenhall, C. A. Batt, J. T. Njardarson, D. A. Scheinberg. PLoS One2, e907 (2007).. Radiomicrosphere therapy (RT) that uses 90Y (with a half-life of 64 h) microspheres is a proven therapy that helps treat hepatic (liver) cancer (Fig. IUPAC.39.1) [304] C. D. South, M. M. Meyer, G. Meis, E. Y. Kim, F. B. Thomas, A. A. Rikabi, H. Khabiri, M. Bloomston. World J. Surg. Oncol.6, 93 (2008).. 90Y is also used in radiosynovectomy to reduce joint pain [305] E. ‐C. Rodríguez‐Merchán, L. A. Valentino (Eds.), Current and Future Issues in Hemophilia Care, John Wiley & Sons, New York (2011)..
Yttrium most often occurs in the +3 oxidation state, forming colorless or white salts because Y³⁺ has no f electrons. Yttrium oxide, Y₂O₃, is basic and refractory, and yttrium fluoride, YF₃, is a stable, sparingly soluble fluoride. Yttrium chloride, YCl₃, and yttrium nitrate, Y(NO₃)₃, are common soluble laboratory precursors. Mixed oxides such as yttrium barium copper oxide, YBa₂Cu₃O₇−δ, are important in superconductivity, with properties strongly dependent on oxygen content.
See more information at the Yttrium compound page.
Massive yttrium metal has low acute toxicity, but metal dust is a fire hazard and can irritate the lungs or skin. Soluble yttrium salts can be harmful if inhaled or ingested in significant amounts, and insoluble dusts require ordinary industrial dust control. Radioisotope ⁹⁰Y is a strong beta emitter used medically; its hazard is isotope-specific and mainly radiological, not a property of stable natural yttrium.
Yttrium is dispersed in the crust and is usually associated with rare-earth minerals rather than concentrated in its own ores. It is relatively immobile under neutral to alkaline conditions because Y³⁺ hydrolyzes and binds to oxides, phosphates, and organic matter. Weathering can concentrate yttrium with heavy rare earths in ion-adsorption clays and lateritic deposits. No essential biological role is known.
Yttrium is produced as part of rare-earth mining and separation, not as an independent primary metal commodity. Important sources include xenotime, monazite, bastnäsite fractions, and heavy-rare-earth-rich ion-adsorption clays. Separation is difficult because yttrium tracks the heavy lanthanides chemically, so solvent extraction and ion-exchange processes are central to supply. Demand is tied to phosphors, ceramics, lasers, and stabilized zirconia, with substitution possible in some phosphor applications but harder in structural ceramic uses. Recycling is limited and mostly associated with specialized phosphor and electronic waste streams.
Yttrium occurs in nearly all of the rare-earth minerals. Analysis of lunar rock samples obtained during the Apollo missions show a relatively high yttrium content.
It is recovered commercially from monazite sand, which contains about 3%, and from bastnasite, which contains about 0.2%. Wohler obtained the impure element in 1828 by reduction of the anhydrous chloride with potassium. The metal is now produced commercially by reduction of the fluoride with calcium metal. It can also be prepared by other techniques.
Yttrium is a trace element in the cosmos, made mainly by slow and rapid neutron-capture processes in evolved stars and explosive stellar environments. In the Solar System it is far less abundant than iron-group elements but more abundant than many neighboring heavy elements. Its single stable isotope, ⁸⁹Y, makes extraterrestrial yttrium isotopically simple compared with many rare earths.
- Yttrium has only one stable isotope, ⁸⁹Y.
- It was named from Ytterby, the Swedish village linked to several rare-earth discoveries.
- Y³⁺ is diamagnetic, unlike many neighboring lanthanide ions.
- Yttrium is often counted with the heavy rare earths in mining and trade.
- Nd:YAG laser crystals contain yttrium in the host lattice, not as the lasing ion.
- Yttria-stabilized zirconia conducts oxide ions at high temperature.
प्रतिमा
गुणधर्म
भौतिक
- अणुत्रिज्या (अनुभवाधारित)
- 180 pm सर्व घटकांच्या अणुत्रिज्या (अनुभवाधारित) ची तुलना करा →
- सहसंयुजी त्रिज्या
- 190 pm सर्व घटकांच्या सहसंयुजी त्रिज्या ची तुलना करा →
- व्हॅन डर वाल्स त्रिज्या
- 219 pm सर्व घटकांच्या व्हॅन डर वाल्स त्रिज्या ची तुलना करा →
- धात्विक त्रिज्या
- 162 pm सर्व घटकांच्या धात्विक त्रिज्या ची तुलना करा →
- घनता
- 4470 kg/m³ सर्व घटकांच्या घनता ची तुलना करा →
- मोलर आयतन
- 0.0198 L/mol
- STP येथे अवस्था
- घन सर्व घटकांच्या STP येथे अवस्था ची तुलना करा →
- द्रवणांक
- 1521.85 °C सर्व घटकांच्या द्रवणांक ची तुलना करा →
- उत्कलनांक
- 3344.85 °C सर्व घटकांच्या उत्कलनांक ची तुलना करा →
- विशिष्ट उष्माधारकता
- 0.298 J/(g·K) सर्व घटकांच्या विशिष्ट उष्माधारकता ची तुलना करा →
- मोलर उष्माधारकता
- 26.53 J/(mol·K) सर्व घटकांच्या मोलर उष्माधारकता ची तुलना करा →
- स्फटिक संरचना
- षट्कोणी निकट-संकुलित सर्व घटकांच्या स्फटिक संरचना ची तुलना करा →
रासायनिक
- विद्युतऋणता (पॉलिंग)
- 1.22 सर्व घटकांच्या विद्युतऋणता (पॉलिंग) ची तुलना करा →
- विद्युतऋणता (ॲलन)
- 1.12
- इलेक्ट्रॉन आसक्ती
- 0.307 eV
- आयनीकरण ऊर्जा (पहिली)
- 6.21726 eV सर्व घटकांच्या आयनीकरण ऊर्जा (पहिली) ची तुलना करा →
- आयनीकरण ऊर्जा (दुसरी)
- 12.223642 eV सर्व घटकांच्या आयनीकरण ऊर्जा (दुसरी) ची तुलना करा →
- आयनीकरण ऊर्जा (तिसरी)
- 20.524481 eV सर्व घटकांच्या आयनीकरण ऊर्जा (तिसरी) ची तुलना करा →
- आयनीकरण ऊर्जा (चौथी)
- 60.607409 eV सर्व घटकांच्या आयनीकरण ऊर्जा (चौथी) ची तुलना करा →
- आयनीकरण ऊर्जा (पाचवी)
- 75.350259 eV सर्व घटकांच्या आयनीकरण ऊर्जा (पाचवी) ची तुलना करा →
- ऑक्सिडीकरण अवस्था
- 0, +1, +2, +3 सर्व घटकांच्या ऑक्सिडीकरण अवस्था ची तुलना करा →
- संयुजा इलेक्ट्रॉन
- 3 सर्व घटकांच्या संयुजा इलेक्ट्रॉन ची तुलना करा →
- इलेक्ट्रॉन संरूपण
- [Kr] 5s2 4d1
उष्मागतिक
- द्रवण उष्मा
- 0.11836037 eV सर्व घटकांच्या द्रवण उष्मा ची तुलना करा →
- बाष्पीभवन उष्मा
- 3.762243 eV सर्व घटकांच्या बाष्पीभवन उष्मा ची तुलना करा →
- संप्लवन उष्मा
- 4.394465 eV
- अणूकरण उष्मा
- 4.394465 eV
- अणूकरण एन्थाल्पी
- 4.40172 eV
केंद्रकीय
- प्रोटॉन
- 39 सर्व घटकांच्या प्रोटॉन ची तुलना करा →
- न्यूट्रॉन
- 50 सर्व घटकांच्या न्यूट्रॉन ची तुलना करा →
- ज्ञात समस्थानिके
- 35 सर्व घटकांच्या ज्ञात समस्थानिके ची तुलना करा →
- स्थिर समस्थानिके
- 1 सर्व घटकांच्या स्थिर समस्थानिके ची तुलना करा →
- सर्वाधिक स्थिर समस्थानिक
- Y-89
- शोधाचे वर्ष
- 1794
विपुलता
- विपुलता (पृथ्वीचे कवच)
- 33 mg/kg सर्व घटकांच्या विपुलता (पृथ्वीचे कवच) ची तुलना करा →
- विपुलता (महासागर)
- 1.3 × 10−5 mg/L सर्व घटकांच्या विपुलता (महासागर) ची तुलना करा →
स्फटिक संरचना
- जालक स्थिरांक a
- 365 pm
इलेक्ट्रॉन संरचना
- प्रत्येक कवचातील इलेक्ट्रॉन
- 2, 8, 18, 9, 2 सर्व घटकांच्या प्रत्येक कवचातील इलेक्ट्रॉन ची तुलना करा →
ओळखचिन्हे
- CAS क्रमांक
- 7440-65-5 सर्व घटकांच्या CAS क्रमांक ची तुलना करा →
- टर्म चिन्ह
- 2D3/2
- InChI
- InChI=1S/Y
- InChI की
- VWQVUPCCIRVNHF-UHFFFAOYSA-N
इलेक्ट्रॉन संरूपण मोजलेले
Y: 4d¹ 5s²[Kr] 4d¹ 5s²1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹ 5s²अणुप्रतिमान
समस्थानिकांमुळे न्यूट्रॉन संख्या, वस्तुमान आणि स्थैर्य बदलते — विद्युतदृष्ट्या उदासीन अणूचे इलेक्ट्रॉन संरूपण बदलत नाही.
योजनात्मक अणुप्रतिमान, प्रमाणानुसार नाही.
अणूची विशिष्ट ओळख
उत्सर्जन / शोषण वर्णपट
समस्थानिक वितरण
| वस्तुमानांक | अणुवस्तुमान (u) | नैसर्गिक विपुलता | अर्धायुष्य |
|---|---|---|---|
| 89 स्थिर | ८८.९०५८४०३ ± ०.०००००२४ | 100.0000% | स्थिर |
अवस्था / स्थिती
कारण: द्रवणांकापेक्षा (1521.85 °C) 1496.8 °C कमी
योजनात्मक, प्रमाणानुसार नाही
अवस्थांतर बिंदू
अवस्थांतर ऊर्जा
द्रवणांकावर 1 mol वितळवण्यासाठी आवश्यक ऊर्जा
उत्कलनांकावर 1 mol चे बाष्पीभवन करण्यासाठी आवश्यक ऊर्जा
संप्लवनांकावर 1 mol चे संप्लवन करण्यासाठी आवश्यक ऊर्जा
घनता
प्रमाणित परिस्थितीत
प्रमाणित परिस्थितीत
अणुवर्णपट
39 पैकी 10 दाखवले आहेत. आयनाच्या विद्युतभारानुसार चढत्या क्रमाने मांडलेले.
वर्णरेषांचा संग्रह ?
| आयन | विद्युतभार | एकूण वर्णरेषा | संक्रमण संभाव्यता | पातळ्यांची नामांकने |
|---|---|---|---|---|
| Y I | 0 | 361 | 189 | 351 |
| Y II | +1 | 116 | 66 | 116 |
| Y III | +2 | 113 | 0 | 0 |
| Y IV | +3 | 25 | 0 | 0 |
| Y V | +4 | 632 | 632 | 632 |
| Y VII | +6 | 168 | 168 | 168 |
| Y VIII | +7 | 70 | 70 | 70 |
ऊर्जा पातळ्यांचा संग्रह ?
| आयन | विद्युतभार | पातळ्या |
|---|---|---|
| Y I | 0 | 194 |
| Y II | +1 | 249 |
| Y III | +2 | 51 |
| Y IV | +3 | 130 |
| Y V | +4 | 114 |
| Y VI | +5 | 2 |
| Y VII | +6 | 57 |
| Y VIII | +7 | 33 |
| Y IX | +8 | 2 |
| Y X | +9 | 2 |
आयनिक त्रिज्या
| विद्युतभार | समन्वय | प्रचक्रण | त्रिज्या |
|---|---|---|---|
| +3 | 6 | उपलब्ध नाही | 90 pm |
| +3 | 7 | उपलब्ध नाही | 96 pm |
| +3 | 8 | उपलब्ध नाही | 101.89999999999999 pm |
| +3 | 9 | उपलब्ध नाही | 107.5 pm |
संयुगे
समस्थानिके (1)
Natural yttrium contains one isotope, 89Y. Nineteen other unstable isotopes have been characterized.
| वस्तुमानांक | अणुवस्तुमान (u) | नैसर्गिक विपुलता | अर्धायुष्य | क्षय प्रकार | |
|---|---|---|---|---|---|
| 89 स्थिर | ८८.९०५८४०३ ± ०.०००००२४ | 100.0000% | स्थिर | stable |
वर्णरेषा
266 पैकी 50 दाखवले आहेत. मूलभूत सेटिंगनुसार केवळ मोजलेली तीव्रता असलेल्या वर्णरेषा दाखवल्या जातात.
| तरंगलांबी (nm) | तीव्रता | आयनीकरण टप्पा | प्रकार | संक्रमण | अचूकता | स्रोत | |
|---|---|---|---|---|---|---|---|
| 410.23691 nm | 9900 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2F* | मोजलेले | NIST | |
| 407.735998 nm | 9400 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2F* | मोजलेले | NIST | |
| 412.829876 nm | 8900 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2D* | मोजलेले | NIST | |
| 414.28358 nm | 7500 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2D* | मोजलेले | NIST | |
| 404.76281 nm | 2400 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p y 2P* | मोजलेले | NIST | |
| 416.750671 nm | 2400 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2F* | मोजलेले | NIST | |
| 423.5934 nm | 2200 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2D* | मोजलेले | NIST | |
| 408.37033 nm | 2000 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p y 2P* | मोजलेले | NIST | |
| 417.41339 nm | 2000 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p y 2P* | मोजलेले | NIST | |
| 464.368813 nm | 2000 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 2F* | मोजलेले | NIST | |
| 467.48486 nm | 2000 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 2F* | मोजलेले | NIST | |
| 619.17183 nm | 1200 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 2D* | मोजलेले | NIST | |
| 643.50036 nm | 1000 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 2D* | मोजलेले | NIST | |
| 403.982219 nm | 940 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(1D).5p y 2D* | मोजलेले | NIST | |
| 452.72342 nm | 890 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4D* | मोजलेले | NIST | |
| 483.9861 nm | 770 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4F* | मोजलेले | NIST | |
| 552.75472 nm | 740 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p z 4G* | मोजलेले | NIST | |
| 546.6464 nm | 710 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p z 4G* | मोजलेले | NIST | |
| 558.18694 nm | 620 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p z 4G* | मोजलेले | NIST | |
| 563.01301 nm | 560 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p z 4G* | मोजलेले | NIST | |
| 484.56655 nm | 550 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4F* | मोजलेले | NIST | |
| 450.59441 nm | 500 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4D* | मोजलेले | NIST | |
| 452.77815 nm | 440 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4D* | मोजलेले | NIST | |
| 476.09753 nm | 410 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 2F* | मोजलेले | NIST | |
| 485.26766 nm | 410 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4F* | मोजलेले | NIST | |
| 485.98428 nm | 330 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4F* | मोजलेले | NIST | |
| 425.11994 nm | 300 | Y I | emission | 4d.5s.(3D).5p z 4F* → 4d.5s.(3D).5d e 4G | मोजलेले | NIST | |
| 448.74634 nm | 300 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4D* | मोजलेले | NIST | |
| 550.3466 nm | 300 | Y I | emission | 4d2.(3F).5s a 2F → 4d2.(3F).5p x 2F* | मोजलेले | NIST | |
| 622.25784 nm | 300 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 2D* | मोजलेले | NIST | |
| 543.82242 nm | 190 | Y I | emission | 4d2.(3F).5s a 2F → 4d2.(3F).5p x 2D* | मोजलेले | NIST | |
| 546.62434 nm | 190 | Y I | emission | 4d.5s.(3D).5p z 4F* → 4d.5s.(3D).6s e 4D | मोजलेले | NIST | |
| 679.37029 nm | 190 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 4F* | मोजलेले | NIST | |
| 524.08001 nm | 181 | Y I | emission | 4d2.(1G).5s a 2G → 4d2.(1G).5p z 2H* | मोजलेले | NIST | |
| 447.69471 nm | 180 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p x 2F* | मोजलेले | NIST | |
| 469.67994 nm | 180 | Y I | emission | 4d2.(1D).5s b 2D → 4d2.(1D).5p w 2F* | मोजलेले | NIST | |
| 479.92999 nm | 180 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4F* | मोजलेले | NIST | |
| 513.51993 nm | 180 | Y I | emission | 4d2.(1G).5s a 2G → 4d2.(1G).5p z 2H* | मोजलेले | NIST | |
| 557.74153 nm | 180 | Y I | emission | 4d2.(3F).5s a 2F → 4d2.(3F).5p z 2G* | मोजलेले | NIST | |
| 447.57178 nm | 170 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4D* | मोजलेले | NIST | |
| 472.8516 nm | 170 | Y I | emission | 5s2.5p z 2P* → 5s2.6s e 2S | मोजलेले | NIST | |
| 478.68762 nm | 170 | Y I | emission | 4d2.(3P).5s a 4P → 4d2.(3P).5p x 4D* | मोजलेले | NIST | |
| 421.77985 nm | 160 | Y I | emission | 5s2.5p z 2P* → 5s2.(2D).5d e 2D | मोजलेले | NIST | |
| 447.74436 nm | 160 | Y I | emission | 4d2.(3F).5s a 4F → 4d2.(3F).5p y 4D* | मोजलेले | NIST | |
| 475.2787 nm | 160 | Y I | emission | 4d2.(3F).5s a 2F → 4d2.(3P).5p x 4D* | मोजलेले | NIST | |
| 570.67133 nm | 160 | Y I | emission | 4d.5s.(3D).5p z 4F* → 4d.5s.(3D).6s e 4D | मोजलेले | NIST | |
| 492.18769 nm | 150 | Y I | emission | 5s2.5p z 2P* → 5s2.6s e 2S | मोजलेले | NIST | |
| 613.84349 nm | 150 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 4D* | मोजलेले | NIST | |
| 668.75669 nm | 150 | Y I | emission | 4d.5s2 a 2D → 4d.5s.(3D).5p z 4F* | मोजलेले | NIST | |
| 465.37837 nm | 140 | Y I | emission | 4d2.(1D).5s b 2D → 4d2.(3P).5p y 4P* | मोजलेले | NIST |
विस्तारित गुणधर्म
सहसंयुजी त्रिज्या (विस्तारित)
- सहसंयुजी त्रिज्या (प्युक्को)
- 163 pm
- सहसंयुजी त्रिज्या (प्युक्को, दुहेरी बंध)
- 130 pm
- सहसंयुजी त्रिज्या (प्युक्को, तिहेरी बंध)
- 124 pm
व्हॅन डर वाल्स त्रिज्या
- Batsanov
- 240 pm
- Alvarez
- 275 pm
- UFF
- 334.5 pm
- MM3
- 271 pm
अणुत्रिज्या आणि धात्विक त्रिज्या
- अणुत्रिज्या (राह्म)
- 274 pm
- धात्विक त्रिज्या (C12)
- 180 pm
क्रमांकन मापनपट्ट्या
- Mendeleev
- 12
- Pettifor
- 19
- Glawe
- 21
विद्युतऋणता मापनपट्ट्या
- Ghosh
- 0
- Miedema
- 3
- Gunnarsson–Lundqvist
- 3
- Robles–Bartolotti
- 3
ध्रुवणक्षमता आणि अपस्करण
- द्विध्रुव ध्रुवणक्षमता
- 162 a.u.
- द्विध्रुव ध्रुवणक्षमता (अनिश्चितता)
- 12 a.u.
- C₆ (Gould–Bučko)
- 2600 Ha·Bohr6
रासायनिक आसक्ती
- प्रोटॉन आसक्ती
- 967 kJ/mol
- वायूची क्षारकता
- 945.9 kJ/mol
मिडेमा प्राचल
- मिडेमा मोलर आयतन
- 19.9 cm3/mol
- मिडेमा इलेक्ट्रॉन घनता
- 2
पुरवठा जोखीम आणि अर्थकारण
- उत्पादनाचे केंद्रीकरण
- 97
- सापेक्ष पुरवठा जोखीम
- 10
- साठ्यांचे वितरण
- 50
- राजकीय स्थैर्य (प्रमुख उत्पादक)
- 24
- राजकीय स्थैर्य (सर्वाधिक साठे असलेला देश)
- 24
अवस्थांतरे आणि अपरूपे
| द्रवणांक | 1795.15 K |
| उत्कलनांक | 3618.15 K |
ऑक्सिडीकरण अवस्थांचे वर्ग
प्रगत संदर्भ माहिती
परिरक्षण स्थिरांक (10)
| n | कक्षिका | σ |
|---|---|---|
| 1 | s | 0.8244 |
| 2 | p | 3.9968 |
| 2 | s | 10.3778 |
| 3 | d | 13.6029 |
| 3 | p | 15.9075 |
| 3 | s | 15.4485 |
| 4 | d | 23.0416 |
| 4 | p | 26.2544 |
| 4 | s | 24.7364 |
| 5 | s | 32.744 |
स्फटिक त्रिज्यांचा तपशील (4)
| विद्युतभार | CN | प्रचक्रण | rcrystal (pm) | उत्पत्ती |
|---|---|---|---|---|
| 3 | VI | 104 | from r^3 vs V plots, | |
| 3 | VII | 110 | ||
| 3 | VIII | 115.9 | from r^3 vs V plots, | |
| 3 | IX | 121.5 | from r^3 vs V plots, |
समस्थानिक क्षय प्रकार (60)
| समस्थानिक | मोड | तीव्रता |
|---|---|---|
| 75 | B+ | — |
| 75 | B+p | — |
| 75 | p | — |
| 76 | B+ | — |
| 76 | p | — |
| 76 | B+p | — |
| 77 | B+ | 100% |
| 77 | B+p | — |
| 77 | p | — |
| 78 | B+ | 100% |
क्ष-किरण प्रकीर्णन गुणक (619)
| ऊर्जा (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 2.26036 |
| 10.1617 | — | 2.25621 |
| 10.3261 | — | 2.25207 |
| 10.4931 | — | 2.24793 |
| 10.6628 | — | 2.2438 |
| 10.8353 | — | 2.23968 |
| 11.0105 | — | 2.23344 |
| 11.1886 | — | 2.21122 |
| 11.3696 | — | 2.18921 |
| 11.5535 | — | 2.16742 |
अतिरिक्त माहिती
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
3.3×101 milligrams per kilogram
संदर्भ (1)
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
1.3×10-5 milligrams per liter
संदर्भ (1)
Sources
Sources of this element.
Yttrium occurs in nearly all of the rare-earth minerals. Analysis of lunar rock samples obtained during the Apollo missions show a relatively high yttrium content.
It is recovered commercially from monazite sand, which contains about 3%, and from bastnasite, which contains about 0.2%. Wohler obtained the impure element in 1828 by reduction of the anhydrous chloride with potassium. The metal is now produced commercially by reduction of the fluoride with calcium metal. It can also be prepared by other techniques.
संदर्भ (1)
- [6] Yttrium https://periodic.lanl.gov/39.shtml
संदर्भ
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Yttrium.
The element property data was retrieved from publications.