Scandium (Sc)
transition-metalSolid
प्रमाणित अणुभार
44.955908 uइलेक्ट्रॉन संरूपण
[Ar] 4s2 3d1द्रवणांक
1540.85 °Cउत्कलनांक
2835.85 °Cघनता
2990 kg/m³ऑक्सिडीकरण अवस्था
0, +1, +2, +3विद्युतऋणता (पॉलिंग)
1.36आयनीकरण ऊर्जा (पहिली)
6.56149 eVशोधाचे वर्ष
1879अणुत्रिज्या
160 pmतपशील
Scandium is a light transition metal with chemistry dominated by the +3 oxidation state. It is chemically similar to yttrium and the lanthanides, but its small ionic radius gives some distinct coordination behavior. The element is widely dispersed in minerals and rarely occurs in rich, easily worked ores. Its technological importance is concentrated in specialty aluminum alloys, high-intensity lighting, and research materials rather than large-volume metal use.
Scandium is a silver-white metal which develops a slightly yellowish or pinkish cast upon exposure to air. A relatively soft element, scandium resembles yttrium and the rare-earth metals more than it resembles aluminum or titanium.
It is a very light metal and has a much higher melting point than aluminum, making it of interest to designers of spacecraft. Scandium is not attacked by a 1:1 mixture of HNO3 and 48% HF.
Chemically it is one of the alkaline earth elements; it readily forms a white coating of nitride in air, reacts with water, burns with a yellow-red flame.
The name derives from the Latin scandia for Scandinavia, where the mineral was found. It was discovered by the Swedish chemist Lars-Fredrik Nilson in 1879 in an ytterbium sample. In the same year, the Swedish chemist Per Theodore Cleve proved that scandium was Mendeleev's predicted "eka-boron".
Scandium was discovered by Lars Fredrik Nilson, a Swedish chemist, in 1879 while attempting to produce a sample of pure ytterbia from 10 kilograms of the mineral euxenite ((Y, Ca, Er, La, Ce, U, Th)(Nb, Ta, Ti)2O6). Scandium can be obtained from the minerals thortveitite ((Sc, Y)2Si2O7), bazzite (Be3(Sc, Al)2Si6O18) and wiikite, but is usually obtained as a byproduct of refining uranium. Metallic scandium was first produced in 1937 and the first pound (0.45 kilograms) of pure scandium was produced in 1960. Scandium is a soft, light metal that might have applications in the aerospace industry. With a cost of $270 per gram ($122,500 per pound), scandium is too expensive for widespread use.
From the Latin word Scandia, Scandinavia. On the basis of the Periodic System, Mendeleev predicted the existence of ekaboron, which would have an atomic weight between 40 of calcium and 48 of titanium. The element was discovered by Nilson in 1878 in the minerals euxenite and gadolinite, which had not yet been found anywhere except in Scandinavia. By processing 10 kg of euxenite and other residues of rare-earth minerals, Nilson was able to prepare about 2g of highly pure scandium oxide. Later scientists pointed out that Nilson's scandium was identical with Mendeleev's ekaboron.
Pure scandium is a soft, silvery-white metal that tarnishes slowly in air, developing a yellowish or pinkish cast from surface oxidation. It is much less dense than most transition metals and can be cut or worked more readily than refractory metals.
Small additions of scandium strengthen aluminum alloys and improve weldability, especially in high-performance aerospace, sporting, and additive-manufactured components. Scandium iodide, ScI₃, has been used with sodium iodide, NaI, in metal-halide lamps to produce a bright, sunlight-like spectrum. Scandium compounds are also used in research on solid oxide fuel cells, ceramics, catalysts, and optical materials. The radioisotope ⁴⁴Sc is investigated for positron emission tomography, but such medical use depends on isotope production and radiochemical handling rather than bulk scandium metal.
Alloys of scandium and aluminum are used in some kinds of athletic equipment, such as aluminum baseball bats, bicycle frames and lacrosse sticks. It is expected that scandium-aluminum alloys will be important in the manufacture of fuel cells.
Scientists have only studied a few compounds of scandium. About 20 kilograms (44 pounds) of scandium oxide (Sc2O3), also known as scandia, are used each year in the United States in the production of high intensity lights. Scandium iodide (ScI3) is added to mercury vapor lamps so that they will emit light that closely resembles sunlight.
About 20 kg of scandium (as Sc2O3) are used yearly in the U.S. to produce high-intensity lights. The radioactive isotope 46Sc is used as a tracing agent in refinery crackers for crude oil, etc.
Scandium iodide added to mercury vapor lamps produces a highly efficient light source resembling sunlight, which is important for indoor or night-time color TV.
Isotopes in Biology
Radioactive 46Sc is used as a non-absorbed isotopic reference material for determining digestibility, absorption in the gut, and secretion sites for nutrients associated with feed residues in ruminating animals (animals that chew their food repeatedly for an extended period of time) [190] J. K. Miller, W. F. Byrne. J. Nutr.100, 1287 (1970)..
Isotopes in Earth/Planetary Science
The radioactive isotope 46Sc has been used for sediment labeling to determine the transportation of sediments by water flow in rivers, estuaries, harbors, and seas. The half-life of 46Sc is about 84 days and when released into an estuary with similar grain density and grain size, a gamma spectrometer (instrument for measuring the intensity of gamma radiation versus the energy of each photon) can be used to measure the intensities of 46Sc in the sediments and the movement of the sediments can be determined [191] A. Plata-Bedmar. Topical Reports, IAEA Bulletin (1988)., [192] K. Krishnamurthy, S. M. Rao. J. Hydrol.19, 189 (1973)., [193] I. Rehana, K. A. Shahid, S. Husain, D. Muhammad. Appl. Radiat. Isot.51, 115 (1999)..
Isotopes in Industry
46Sc is a beta emitter and has been used as a tracer in oil refinery crackers for crude oil (converting crude oil into gasoline and other lower-molecular weight hydrocarbon fractions). Its beta radiation enables the substance to be tracked as the oil travels [194] J. Guizerix, V. Markovic, P. Airey. Nuclear Techniques for Peaceful Development, IAEA Bulletin (1987).. Due to its easily traceable properties, coastal engineers use 46Sc to develop dredging strategies and to design navigation channels based on silt movement [192] K. Krishnamurthy, S. M. Rao. J. Hydrol.19, 189 (1973)..
Isotopes in Medicine
46Sc is used in isotope-carrying antibodies for bonding with tumor-associated cell surface antigens (substances that causes the production of an antibody when introduced into the body, e.g. toxins, bacteria, and viruses). 46Sc is added to DTPA-derivatized (process by which a compound is chemically changed, producing a new compound that has properties more amenable to a particular analytical method) monoclonal antibodies and has been shown to target tumor cells, specifically in vivo, where it accumulates to high levels in the tumor (Fig. IUPAC.21.1) [195] W. T. Anderson, M. Strand. Cancer Res.45, 2154 (1985)., [196] J. E. Eyles, I. D. Spiers, E. D. Williamson, H. O. Alpar, E. D. Williamson. J. Pharm. Pharmacol.53, 601 (2001)..
Scandium forms predominantly trivalent compounds containing Sc³⁺. Scandium oxide, Sc₂O₃, is a refractory white solid and an important intermediate for preparing other scandium materials. Scandium fluoride, ScF₃, and scandium chloride, ScCl₃, are common salts, with the anhydrous chloride used in some synthetic chemistry. Organoscandium and scandium triflate, Sc(OTf)₃, are useful Lewis acids in research-scale catalysis. Stable lower oxidation states are uncommon under ordinary conditions, although unusual low-valent scandium species can be stabilized in specialized molecular or solid-state environments.
See more information at the Scandium compound page.
Massive scandium metal has low acute toxicity data and is not known to be biologically essential. Finely divided metal dust can present fire or explosion hazards and may irritate the respiratory tract. Soluble scandium salts should be handled as toxicologically incompletely characterized metal compounds. Radioactive scandium isotopes present isotope-specific radiation hazards; ⁴⁶Sc, for example, is a gamma emitter used mainly as a tracer and calibration source.
Little is yet known about the toxicity of scandium; therefore it should be handled with care.
Scandium is a trace constituent of many crustal rocks, commonly substituting for magnesium, iron, aluminum, or rare-earth elements in minerals. It has no major independent biogeochemical cycle and is not a nutrient. Weathering can disperse scandium into soils and sediments, where it tends to remain in mineral phases or adsorb to oxides and clays. Environmental releases are usually associated with mining, ore processing, and industrial handling of scandium-bearing residues.
Scandium is not mined widely as a primary product. Commercial supply is usually recovered as a by-product from selected uranium, titanium, nickel, rare-earth, or bauxite-related processing streams, where scandium is present at low concentrations. The main barrier to wider alloy use is not intrinsic performance but dependable, low-cost supply and purification capacity. Recycling is limited because scandium is used in small amounts and often dispersed in aluminum alloy scrap. Substitution is possible in many applications, but few substitutes reproduce the same strengthening effect in aluminum at such low additions.
Scandium is apparently much more abundant (the 23rd most) in the sun and certain stars than on earth (the 50th most abundant). It is widely distributed on earth, occurring in very minute quantities in over 800 mineral species. The blue color of beryl (aquamarine variety) is said to be due to scandium. It occurs as a principal component in the rare mineral thortveitite, found in Scandinavia and Malagasy. It is also found in the residues remaining after the extraction of tungsten from Zinnwald wolframite, and in wiikite and bazzite.
Most scandium is presently being recovered from thortveitite or is extracted as a by-product from uranium mill tailings. Metallic scandium was first prepared in 1937 by Fischer, Brunger, and Grienelaus who electrolyzed a eutectic melt of potassium, lithium, and scandium chlorides at 700 to 800°C. Tungsten wire and a pool of molten zinc served as the electrodes in a graphite crucible. Pure scandium is now produced by reducing scandium fluoride with calcium metal.
The production of the first pound of 99% pure scandium metal was announced in 1960.
Scandium is a relatively rare odd-Z element in the cosmos. It is produced in stellar nucleosynthesis and supernova-related processes, but in lower abundance than neighboring even-Z elements such as calcium and titanium. In planetary materials it behaves lithophile, concentrating mainly in silicate minerals rather than metallic cores or volatile phases.
- Scandium was discovered after its existence was predicted from a gap below boron in early periodic tables.
- Its name comes from Scandinavia, where scandium-bearing minerals were first studied.
- Aluminum-scandium alloys can retain fine strengthening precipitates after welding better than many conventional aluminum
- Scandium is often grouped with rare-earth elements in processing, although it is not a lanthanide.
- Natural scandium consists almost entirely of the stable isotope ⁴⁵Sc.
- Scandium oxide has a high melting point and is used as a precursor for many scandium chemicals.
प्रतिमा
गुणधर्म
भौतिक
- अणुत्रिज्या (अनुभवाधारित)
- 160 pm सर्व घटकांच्या अणुत्रिज्या (अनुभवाधारित) ची तुलना करा →
- सहसंयुजी त्रिज्या
- 170 pm सर्व घटकांच्या सहसंयुजी त्रिज्या ची तुलना करा →
- व्हॅन डर वाल्स त्रिज्या
- 211 pm सर्व घटकांच्या व्हॅन डर वाल्स त्रिज्या ची तुलना करा →
- धात्विक त्रिज्या
- 144 pm सर्व घटकांच्या धात्विक त्रिज्या ची तुलना करा →
- घनता
- 2990 kg/m³ सर्व घटकांच्या घनता ची तुलना करा →
- मोलर आयतन
- 0.015 L/mol
- STP येथे अवस्था
- घन सर्व घटकांच्या STP येथे अवस्था ची तुलना करा →
- द्रवणांक
- 1540.85 °C सर्व घटकांच्या द्रवणांक ची तुलना करा →
- उत्कलनांक
- 2835.85 °C सर्व घटकांच्या उत्कलनांक ची तुलना करा →
- उष्णता चालकता
- 15.8 W/(m·K) सर्व घटकांच्या उष्णता चालकता ची तुलना करा →
- विशिष्ट उष्माधारकता
- 0.568 J/(g·K) सर्व घटकांच्या विशिष्ट उष्माधारकता ची तुलना करा →
- मोलर उष्माधारकता
- 25.52 J/(mol·K) सर्व घटकांच्या मोलर उष्माधारकता ची तुलना करा →
- स्फटिक संरचना
- षट्कोणी निकट-संकुलित सर्व घटकांच्या स्फटिक संरचना ची तुलना करा →
रासायनिक
- विद्युतऋणता (पॉलिंग)
- 1.36 सर्व घटकांच्या विद्युतऋणता (पॉलिंग) ची तुलना करा →
- विद्युतऋणता (ॲलन)
- 1.19
- इलेक्ट्रॉन आसक्ती
- 0.188 eV
- आयनीकरण ऊर्जा (पहिली)
- 6.56149 eV सर्व घटकांच्या आयनीकरण ऊर्जा (पहिली) ची तुलना करा →
- आयनीकरण ऊर्जा (दुसरी)
- 12.799814 eV सर्व घटकांच्या आयनीकरण ऊर्जा (दुसरी) ची तुलना करा →
- आयनीकरण ऊर्जा (तिसरी)
- 24.756924 eV सर्व घटकांच्या आयनीकरण ऊर्जा (तिसरी) ची तुलना करा →
- आयनीकरण ऊर्जा (चौथी)
- 73.489653 eV सर्व घटकांच्या आयनीकरण ऊर्जा (चौथी) ची तुलना करा →
- आयनीकरण ऊर्जा (पाचवी)
- 91.950317 eV सर्व घटकांच्या आयनीकरण ऊर्जा (पाचवी) ची तुलना करा →
- ऑक्सिडीकरण अवस्था
- 0, +1, +2, +3 सर्व घटकांच्या ऑक्सिडीकरण अवस्था ची तुलना करा →
- संयुजा इलेक्ट्रॉन
- 3 सर्व घटकांच्या संयुजा इलेक्ट्रॉन ची तुलना करा →
- इलेक्ट्रॉन संरूपण
- [Ar] 4s2 3d1
उष्मागतिक
- द्रवण उष्मा
- 0.16582889 eV सर्व घटकांच्या द्रवण उष्मा ची तुलना करा →
- बाष्पीभवन उष्मा
- 3.256465 eV सर्व घटकांच्या बाष्पीभवन उष्मा ची तुलना करा →
- संप्लवन उष्मा
- 3.923926 eV
- अणूकरण उष्मा
- 3.923926 eV
- अणूकरण एन्थाल्पी
- 3.915635 eV
केंद्रकीय
- प्रोटॉन
- 21 सर्व घटकांच्या प्रोटॉन ची तुलना करा →
- न्यूट्रॉन
- 24 सर्व घटकांच्या न्यूट्रॉन ची तुलना करा →
- ज्ञात समस्थानिके
- 29 सर्व घटकांच्या ज्ञात समस्थानिके ची तुलना करा →
- स्थिर समस्थानिके
- 1 सर्व घटकांच्या स्थिर समस्थानिके ची तुलना करा →
- सर्वाधिक स्थिर समस्थानिक
- Sc-45
- शोधाचे वर्ष
- 1879
विपुलता
- विपुलता (पृथ्वीचे कवच)
- 22 mg/kg सर्व घटकांच्या विपुलता (पृथ्वीचे कवच) ची तुलना करा →
- विपुलता (महासागर)
- 6 × 10−7 mg/L सर्व घटकांच्या विपुलता (महासागर) ची तुलना करा →
स्फटिक संरचना
- जालक स्थिरांक a
- 331 pm
इलेक्ट्रॉन संरचना
- प्रत्येक कवचातील इलेक्ट्रॉन
- 2, 8, 9, 2 सर्व घटकांच्या प्रत्येक कवचातील इलेक्ट्रॉन ची तुलना करा →
ओळखचिन्हे
- CAS क्रमांक
- 7440-20-2 सर्व घटकांच्या CAS क्रमांक ची तुलना करा →
- टर्म चिन्ह
- 2D3/2
- InChI
- InChI=1S/Sc
- InChI की
- SIXSYDAISGFNSX-UHFFFAOYSA-N
इलेक्ट्रॉन संरूपण मोजलेले
Sc: 3d¹ 4s²[Ar] 3d¹ 4s²1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹ 4s²अणुप्रतिमान
समस्थानिकांमुळे न्यूट्रॉन संख्या, वस्तुमान आणि स्थैर्य बदलते — विद्युतदृष्ट्या उदासीन अणूचे इलेक्ट्रॉन संरूपण बदलत नाही.
योजनात्मक अणुप्रतिमान, प्रमाणानुसार नाही.
अणूची विशिष्ट ओळख
उत्सर्जन / शोषण वर्णपट
समस्थानिक वितरण
| वस्तुमानांक | अणुवस्तुमान (u) | नैसर्गिक विपुलता | अर्धायुष्य |
|---|---|---|---|
| 45 स्थिर | ४४.९५५९०८२८ ± ०.००००००७७ | 100.0000% | स्थिर |
अवस्था / स्थिती
कारण: द्रवणांकापेक्षा (1540.85 °C) 1515.8 °C कमी
योजनात्मक, प्रमाणानुसार नाही
अवस्थांतर बिंदू
अवस्थांतर ऊर्जा
द्रवणांकावर 1 mol वितळवण्यासाठी आवश्यक ऊर्जा
उत्कलनांकावर 1 mol चे बाष्पीभवन करण्यासाठी आवश्यक ऊर्जा
संप्लवनांकावर 1 mol चे संप्लवन करण्यासाठी आवश्यक ऊर्जा
घनता
प्रमाणित परिस्थितीत
प्रमाणित परिस्थितीत
अणुवर्णपट
21 पैकी 10 दाखवले आहेत. आयनाच्या विद्युतभारानुसार चढत्या क्रमाने मांडलेले.
वर्णरेषांचा संग्रह ?
| आयन | विद्युतभार | एकूण वर्णरेषा | संक्रमण संभाव्यता | पातळ्यांची नामांकने |
|---|---|---|---|---|
| Sc I | 0 | 2198 | 260 | 1682 |
| Sc II | +1 | 829 | 139 | 829 |
| Sc III | +2 | 133 | 97 | 133 |
| Sc IV | +3 | 408 | 4 | 408 |
| Sc V | +4 | 456 | 16 | 456 |
| Sc VI | +5 | 79 | 12 | 75 |
| Sc VII | +6 | 70 | 37 | 70 |
| Sc VIII | +7 | 75 | 48 | 75 |
| Sc IX | +8 | 42 | 22 | 42 |
| Sc X | +9 | 99 | 29 | 99 |
ऊर्जा पातळ्यांचा संग्रह ?
| आयन | विद्युतभार | पातळ्या |
|---|---|---|
| Sc I | 0 | 478 |
| Sc II | +1 | 169 |
| Sc III | +2 | 44 |
| Sc IV | +3 | 129 |
| Sc V | +4 | 119 |
| Sc VI | +5 | 40 |
| Sc VII | +6 | 35 |
| Sc VIII | +7 | 27 |
| Sc IX | +8 | 27 |
| Sc X | +9 | 68 |
आयनिक त्रिज्या
| विद्युतभार | समन्वय | प्रचक्रण | त्रिज्या |
|---|---|---|---|
| +3 | 6 | उपलब्ध नाही | 74.5 pm |
| +3 | 8 | उपलब्ध नाही | 87 pm |
संयुगे
समस्थानिके (1)
| वस्तुमानांक | अणुवस्तुमान (u) | नैसर्गिक विपुलता | अर्धायुष्य | क्षय प्रकार | |
|---|---|---|---|---|---|
| 45 स्थिर | ४४.९५५९०८२८ ± ०.००००००७७ | 100.0000% | स्थिर | stable |
वर्णरेषा
946 पैकी 50 दाखवले आहेत. मूलभूत सेटिंगनुसार केवळ मोजलेली तीव्रता असलेल्या वर्णरेषा दाखवल्या जातात.
| तरंगलांबी (nm) | तीव्रता | आयनीकरण टप्पा | प्रकार | संक्रमण | अचूकता | स्रोत | |
|---|---|---|---|---|---|---|---|
| 683.5026 nm | 640 | Sc I | emission | 3d2.(3P).4s 2P → 3d2.(3P).4p 2S* | मोजलेले | NIST | |
| 681.9491 nm | 485 | Sc I | emission | 3d.4s.(1D).4p 2F* → 3d.4s.(3D).5s 2D | मोजलेले | NIST | |
| 673.7872 nm | 465 | Sc I | emission | 3d.4s.(3D).4p 2F* → 3d.4s.(3D).4d 2G | मोजलेले | NIST | |
| 673.945 nm | 360 | Sc I | emission | 3d.4s.(3D).4p 2F* → 3d.4s.(3D).4d 2G | मोजलेले | NIST | |
| 681.7117 nm | 345 | Sc I | emission | 3d2.(3P).4s 2P → 3d2.(3P).4p 2S* | मोजलेले | NIST | |
| 682.9509 nm | 335 | Sc I | emission | 3d.4s.(1D).4p 2F* → 3d.4s.(3D).5s 2D | मोजलेले | NIST | |
| 406.8661 nm | 100 | Sc III | emission | 3p6.4d 2D → 3p6.4f 2F* | मोजलेले | NIST | |
| 744.9141 nm | 90 | Sc III | emission | 3p6.5s 2S → 3p6.5p 2P* | मोजलेले | NIST | |
| 406.121 nm | 80 | Sc III | emission | 3p6.4d 2D → 3p6.4f 2F* | मोजलेले | NIST | |
| 625.6013 nm | 80 | Sc III | emission | 3p6.4d 2D → 3p6.5p 2P* | मोजलेले | NIST | |
| 503.2072 nm | 60 | Sc III | emission | 3p6.5p 2P* → 3p6.5d 2D | मोजलेले | NIST | |
| 630.7603 nm | 60 | Sc III | emission | 3p6.4d 2D → 3p6.5p 2P* | मोजलेले | NIST | |
| 499.2886 nm | 50 | Sc III | emission | 3p6.5p 2P* → 3p6.5d 2D | मोजलेले | NIST | |
| 652.5571 nm | 40 | Sc I | emission | 3d.4s.(3D).4p 2D* → 3d.4s.(3D).4d 2D | मोजलेले | NIST | |
| 671.4599 nm | 40 | Sc I | emission | 3d.4s.(3D).4p 2D* → 3d.4s.(3D).4d 4D | मोजलेले | NIST | |
| 655.7842 nm | 35 | Sc I | emission | 3d.4s.(1D).4p 2F* → 3d3 2D2 | मोजलेले | NIST | |
| 688.5119 nm | 27 | Sc I | emission | 3d2.(3F).4p 4F* → 3d2.(3F).4d 4G | मोजलेले | NIST | |
| 716.9083 nm | 27 | Sc I | emission | 3d.4s.(3D).4p 2D* → 3d.4s.(3D).4d 2F | मोजलेले | NIST | |
| 688.1012 nm | 26 | Sc I | emission | 3d2.(3F).4p 4F* → 3d2.(3F).4d 4G | मोजलेले | NIST | |
| 662.0207 nm | 21 | Sc I | emission | 3d.4s.(3D).4p 2F* → 3d3 2F | मोजलेले | NIST | |
| 713.8107 nm | 19 | Sc I | emission | 3d.4s.(3D).4p 2D* → 3d.4s.(3D).4d 2F | मोजलेले | NIST | |
| 467.0407 nm | 18 | Sc II | emission | 3p6.3d2 1D → 3p6.3d.4p 1F* | मोजलेले | NIST | |
| 673.0754 nm | 18 | Sc I | emission | 3d2.(3F).4p 4D* → 4P | मोजलेले | NIST | |
| 687.7343 nm | 18 | Sc I | emission | 3d2.(3F).4p 4F* → 3d2.(3F).4d 4G | मोजलेले | NIST | |
| 431.4083 nm | 17 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3D* | मोजलेले | NIST | |
| 503.1021 nm | 17 | Sc II | emission | 3p6.3d2 1D → 3p6.3d.4p 1P* | मोजलेले | NIST | |
| 680.4611 nm | 17 | Sc I | emission | 3d2.(3F).4p 4F* → 3d2.(3F).4d 4D | मोजलेले | NIST | |
| 437.4457 nm | 16 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3F* | मोजलेले | NIST | |
| 523.9813 nm | 16 | Sc II | emission | 3p6.4s2 1S → 3p6.3d.4p 1P* | मोजलेले | NIST | |
| 552.679 nm | 16 | Sc II | emission | 3p6.3d2 1G → 3p6.3d.4p 1F* | मोजलेले | NIST | |
| 430.5714 nm | 15 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3D* | मोजलेले | NIST | |
| 432.0732 nm | 15 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3D* | मोजलेले | NIST | |
| 478.0863 nm | 15 | Sc III | emission | 3p6.5p 2P* → 3p6.6s 2S | मोजलेले | NIST | |
| 565.7896 nm | 15 | Sc II | emission | 3p6.3d2 3P → 3p6.3d.4p 3P* | मोजलेले | NIST | |
| 624.5637 nm | 15 | Sc II | emission | 3p6.3d2 3P → 3p6.3d.4p 3D* | मोजलेले | NIST | |
| 577.1538 nm | 14 | Sc IV | emission | 3s2.3p5.(2P*<3/2>).5s 2[3/2]* → 3s2.3p5.(2P*<3/2>).5p 2[5/2] | मोजलेले | NIST | |
| 637.0486 nm | 14 | Sc II | emission | 3p6.3d.4d 1F → 3p6.3d.4f 1G* | मोजलेले | NIST | |
| 660.4601 nm | 14 | Sc II | emission | 3p6.3d2 1D → 3p6.3d.4p 1D* | मोजलेले | NIST | |
| 680.3677 nm | 14 | Sc I | emission | 3d.4s.(3D).4p 2F* → 3d.4s.(3D).4d 2G | मोजलेले | NIST | |
| 725.7589 nm | 14 | Sc I | emission | 3d2.(3F).4p 4F* → 3d.(2D).4p2.(3P) 4F | मोजलेले | NIST | |
| 401.4484 nm | 13 | Sc II | emission | 3p6.3d.4s 1D → 3p6.3d.4p 3F* | मोजलेले | NIST | |
| 429.4767 nm | 13 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3D* | मोजलेले | NIST | |
| 432.4996 nm | 13 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3D* | मोजलेले | NIST | |
| 564.1001 nm | 13 | Sc II | emission | 3p6.3d2 3P → 3p6.3d.4p 3P* | मोजलेले | NIST | |
| 565.8361 nm | 13 | Sc II | emission | 3p6.3d2 3P → 3p6.3d.4p 3P* | मोजलेले | NIST | |
| 566.9042 nm | 13 | Sc II | emission | 3p6.3d2 3P → 3p6.3d.4p 3P* | मोजलेले | NIST | |
| 687.4193 nm | 13 | Sc I | emission | 3d2.(3F).4p 4F* → 3d2.(3F).4d 4G | मोजलेले | NIST | |
| 385.9595 nm | 12 | Sc II | emission | 3p6.3d.4p 1F* → 3p6.3d.5s 1D | मोजलेले | NIST | |
| 424.6822 nm | 12 | Sc II | emission | 3p6.3d.4s 1D → 3p6.3d.4p 1D* | मोजलेले | NIST | |
| 435.4598 nm | 12 | Sc II | emission | 3p6.3d2 3F → 3p6.3d.4p 3F* | मोजलेले | NIST |
विस्तारित गुणधर्म
सहसंयुजी त्रिज्या (विस्तारित)
- सहसंयुजी त्रिज्या (प्युक्को)
- 148 pm
- सहसंयुजी त्रिज्या (प्युक्को, दुहेरी बंध)
- 116 pm
- सहसंयुजी त्रिज्या (प्युक्को, तिहेरी बंध)
- 114 pm
व्हॅन डर वाल्स त्रिज्या
- Batsanov
- 230 pm
- Alvarez
- 258 pm
- UFF
- 329.5 pm
- MM3
- 261 pm
अणुत्रिज्या आणि धात्विक त्रिज्या
- अणुत्रिज्या (राह्म)
- 263 pm
- धात्विक त्रिज्या (C12)
- 162 pm
क्रमांकन मापनपट्ट्या
- Mendeleev
- 11
- Pettifor
- 20
- Glawe
- 48
विद्युतऋणता मापनपट्ट्या
- Ghosh
- 0
- Miedema
- 3
- Gunnarsson–Lundqvist
- 4
- Robles–Bartolotti
- 3
ध्रुवणक्षमता आणि अपस्करण
- द्विध्रुव ध्रुवणक्षमता
- 97 a.u.
- द्विध्रुव ध्रुवणक्षमता (अनिश्चितता)
- 10 a.u.
- C₆
- 1383 Ha·Bohr6
- C₆ (Gould–Bučko)
- 1570 Ha·Bohr6
रासायनिक आसक्ती
- प्रोटॉन आसक्ती
- 914 kJ/mol
- वायूची क्षारकता
- 892 kJ/mol
मिडेमा प्राचल
- मिडेमा मोलर आयतन
- 15.03 cm3/mol
- मिडेमा इलेक्ट्रॉन घनता
- 2
पुरवठा जोखीम आणि अर्थकारण
- उत्पादनाचे केंद्रीकरण
- 97
- सापेक्ष पुरवठा जोखीम
- 10
- साठ्यांचे वितरण
- 50
- राजकीय स्थैर्य (प्रमुख उत्पादक)
- 24
- राजकीय स्थैर्य (सर्वाधिक साठे असलेला देश)
- 24
अवस्थांतरे आणि अपरूपे
| द्रवणांक | 1814.15 K |
| उत्कलनांक | 3109.15 K |
ऑक्सिडीकरण अवस्थांचे वर्ग
प्रगत संदर्भ माहिती
परिरक्षण स्थिरांक (7)
| n | कक्षिका | σ |
|---|---|---|
| 1 | s | 0.5434 |
| 2 | p | 3.9454 |
| 2 | s | 6.4264 |
| 3 | d | 13.8801 |
| 3 | p | 11.5938 |
| 3 | s | 10.6602 |
| 4 | s | 16.3676 |
स्फटिक त्रिज्यांचा तपशील (2)
| विद्युतभार | CN | प्रचक्रण | rcrystal (pm) | उत्पत्ती |
|---|---|---|---|---|
| 3 | VI | 88.5 | from r^3 vs V plots, | |
| 3 | VIII | 101 | from r^3 vs V plots, |
समस्थानिक क्षय प्रकार (52)
| समस्थानिक | मोड | तीव्रता |
|---|---|---|
| 35 | p | — |
| 36 | p | — |
| 37 | p | — |
| 38 | p | — |
| 39 | p | 100% |
| 40 | B+ | 100% |
| 40 | B+p | 0.4% |
| 40 | B+A | 0% |
| 41 | B+ | 100% |
| 42 | B+ | 100% |
क्ष-किरण प्रकीर्णन गुणक (598)
| ऊर्जा (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 1.06978 |
| 10.1617 | — | 1.07987 |
| 10.3261 | — | 1.09005 |
| 10.4931 | — | 1.10033 |
| 10.6628 | — | 1.11071 |
| 10.8353 | — | 1.12118 |
| 11.0105 | — | 1.13176 |
| 11.1886 | — | 1.14243 |
| 11.3696 | — | 1.15321 |
| 11.5535 | — | 1.16408 |
अतिरिक्त माहिती
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
2.2×101 milligrams per kilogram
संदर्भ (1)
- [5] Scandium https://education.jlab.org/itselemental/ele021.html
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
6×10-7 milligrams per liter
संदर्भ (1)
- [5] Scandium https://education.jlab.org/itselemental/ele021.html
Sources
Sources of this element.
Scandium is apparently much more abundant (the 23rd most) in the sun and certain stars than on earth (the 50th most abundant). It is widely distributed on earth, occurring in very minute quantities in over 800 mineral species. The blue color of beryl (aquamarine variety) is said to be due to scandium. It occurs as a principal component in the rare mineral thortveitite, found in Scandinavia and Malagasy. It is also found in the residues remaining after the extraction of tungsten from Zinnwald wolframite, and in wiikite and bazzite.
Most scandium is presently being recovered from thortveitite or is extracted as a by-product from uranium mill tailings. Metallic scandium was first prepared in 1937 by Fischer, Brunger, and Grienelaus who electrolyzed a eutectic melt of potassium, lithium, and scandium chlorides at 700 to 800°C. Tungsten wire and a pool of molten zinc served as the electrodes in a graphite crucible. Pure scandium is now produced by reducing scandium fluoride with calcium metal.
The production of the first pound of 99% pure scandium metal was announced in 1960.
संदर्भ (1)
- [6] Scandium https://periodic.lanl.gov/21.shtml
संदर्भ
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Scandium.
The element property data was retrieved from publications.