Calcium (Ca)
alkaline-earth-metalSolid
प्रमाणित अणुभार
40.078 uइलेक्ट्रॉन संरूपण
[Ar] 4s2द्रवणांक
841.85 °Cउत्कलनांक
1483.85 °Cघनता
1540 kg/m³ऑक्सिडीकरण अवस्था
+1, +2विद्युतऋणता (पॉलिंग)
1आयनीकरण ऊर्जा (पहिली)
6.113155 eVशोधाचे वर्ष
1808अणुत्रिज्या
180 pmतपशील
Calcium is an alkaline earth metal and the fifth most abundant element in Earth’s crust by mass. It is highly reactive as a free metal but widespread in stable minerals, especially carbonates, sulfates, phosphates, and silicates. Calcium chemistry is dominated by the Ca²⁺ ion, which is hard, strongly hydrated, and central to limestone formation, cement chemistry, seawater buffering, bones, teeth, shells, and many cellular signaling processes.
The metal has a silvery color, is rather hard, and is prepared by electrolysis of fused chloride and calcium fluoride (to lower the melting point).
Chemically it is one of the alkaline earth elements; it readily forms a white coating of nitride in air, reacts with water, burns with a yellow-red flame.
The name derives from the Latin calx for "lime" (CaO) or "limestone" (CaCO3) in which it was found. It was first isolated by British chemist Humphry Davy in 1808 with help from the Swedish chemist Jöns Jacob Berzelius and the Swedish court physician M. M. af Pontin.
Although calcium is the fifth most abundant element in the earth's crust, it is never found free in nature since it easily forms compounds by reacting with oxygen and water. Metallic calcium was first isolated by Sir Humphry Davy in 1808 through the electrolysis of a mixture of lime (CaO) and mercuric oxide (HgO). Today, metallic calcium is obtained by displacing calcium atoms in lime with atoms of aluminum in hot, low-pressure containers. About 4.2% of the earth's crust is composed of calcium.
From the Latin word calx, lime. Though lime was prepared by the Romans in the first century under the name calx, the metal was not discovered until 1808. After learning that Berzelius and Pontin prepared calcium amalgam by electrolyzing lime in mercury, Davy was able to isolate the impure metal.
Pure calcium is a silvery gray metal that is softer than many structural metals and can be cut when freshly prepared. It tarnishes in air as oxide, nitride, and hydroxide films form, and it reacts slowly with water, releasing H₂. It is normally stored protected from moisture and air.
Metallic calcium is used on a modest scale as a reducing agent, deoxidizer, desulfurizer, and alloying additive, especially in specialty metallurgy and in some lead and aluminum alloys. Much larger practical use is tied to calcium-containing materials: limestone, lime, gypsum, and calcium silicates are essential in cement, glass, steelmaking fluxes, soil amendment, water treatment, and construction. Calcium compounds are also used in food, pharmaceuticals, paper, plastics, and flue-gas treatment.
Due to its high reactivity with common materials, there is very little demand for metallic calcium. It is used in some chemical processes to refine thorium, uranium and zirconium. Calcium is also used to remove oxygen, sulfur and carbon from certain alloys. Calcium can be alloyed with aluminum, beryllium, copper, lead and magnesium. Calcium is also used in vacuum tubes as a getter, a material that combines with and removes trace gases from vacuum tubes.
Calcium carbonate (CaCO3) is one of the common compounds of calcium. It is heated to form quicklime (CaO) which is then added to water (H2O). This forms another material known as slaked lime (Ca(OH)2) which is an inexpensive base material used throughout the chemical industry. Chalk, marble and limestone are all forms of calcium carbonate. Calcium carbonate is used to make white paint, cleaning powder, toothpaste and stomach antacids, among other things. Other common compounds of calcium include: calcium sulfate (CaSO4), also known as gypsum, which is used to make dry wall and plaster of Paris, calcium nitrate (Ca(NO3)2), a naturally occurring fertilizer and calcium phosphate (Ca3(PO4)2), the main material found in bones and teeth.
The metal is used as a reducing agent in preparing other metals such as thorium, uranium, zirconium, etc., and is used as a deoxidizer, desulfurizer, or decarburizer for various ferrous and nonferrous alloys. It is also used as an alloying agent for aluminum, beryllium, copper, lead, and magnesium alloys, and serves as a "getter" for residual gases in vacuum tubes, etc.
Isotopes in Earth/Planetary Science
Molecules, atoms, and ions of the stable isotopes of calcium possess slightly different physical and chemical properties, and they commonly will be fractionated during physical, chemical, and biological processes, giving rise to variations in isotopic abundances and in atomic weights (Fig. IUPAC.20.1). The isotope-amount ratio n(44Ca)/n(40Ca) is used to quantify the calcium cycle (sources and sinks of calcium) in the ocean. Calcium isotopes fractionate (separate) in terrestrial and marine environments owing to biological and inorganic processes, which discriminate against heavy calcium isotopes. The calcification process controls the removal of calcium from the ocean, which is mostly balanced by hydrothermal and riverine calcium input. Calcium has a long residence time, symbol τ, in seawater (τCa about 1 to 2 million years) relative to the short mixing time of the global ocean (about 1000 years), which has allowed the calcium isotopic composition of modern seawater to homogenize globally. This was likely the case in the geological past as well, which makes the n(44Ca)/n(40Ca) ratio useful when quantifying the oceanic calcium cycle [182] P. Zhu, J. D. Macdougall. Geochim. Cosmochim. Acta62, 1691 (1998)., [183] J. Farkaš, D. Buhl, J. Blenkinsop, J. Veizer. Earth Planet. Sci. Lett.253, 96 (2007).. The isotope-amount ratio n(44Ca)/n(40Ca) has been used to trace sources of calcium in soil and river water [184] T. Walczyk. Fresenius J. Anal. Chem.370, 444 (2001).. The isotope-amount ratio n(44Ca)/n(40Ca) ratio of calcium carbonate may serve as a paleothermometer to determine seawater temperatures in the past, making use of the temperature-dependent isotopic fractionation between 40Ca and 44Ca [185] E. M. Griffith, E. A. Schauble, T. D. Bullen, A. Paytan. Geochim. Cosmochim. Acta72, 5641 (2008)., [186] T. F. Nägler, A. Eisenhauer, A. Müller, C. Hemleben, J. Kramers. Geochem. Geophy. Geosy.1, 1052 (2000)..
The radioactive isotope 45Ca (half-life of 163 days) is used to study calcium behavior in soils, detergents, water-purification systems, and glassy materials. 45Ca is introduced into a system and monitored to measure various types of calcium responses within the system and to investigate how calcium of one matrix may interact with another (i.e. calcium of soil mixing with that of fertilizers). 45Ca has been used to investigate the transport of contaminants in groundwater through the unsaturated zone [187] P. Nkedi-Kizza, M. L. Brusseau, P. S. C. Rao, A. G. Hornsby. Environ. Sci. Technol.23, 814 (1989)..
Isotopes in Medicine
Stable isotopes of calcium (42Ca, 44Ca, 46Ca, and 48Ca) and radioisotopes of calcium (45Ca and 47Ca, with a half-life of 109 h) can be used for tracing calcium uptake, utilization, and excretion in the body. For example, most of our knowledge on the efficiency by which calcium is absorbed in the intestine (bioavailability) comes from studies in which calcium in the diet was labeled with stable or radioactive isotopes. In such studies, the isotope-labeled food is ingested and fecal matter tested for the presence and quantity of unabsorbed isotope. When coupling oral ingestion of food labeled with one calcium isotope with an intravenous injection of a second calcium isotope, this technique can be used as a means to measure calcium absorption within the body by measuring excretion of both tracers in the urine. In a similar fashion, dietary absorption of magnesium and zinc can be studied [184] T. Walczyk. Fresenius J. Anal. Chem.370, 444 (2001)., [188] S. J. Adelstein, F. J. Manning. Isotopes for Medicine and the Life Sciences, pp. 20–25, National Academy Press, Washington DC (1995)..
Stable and radioactive isotopes are used in biomedical research and clinical practice to study disorders associated with calcium metabolism, in particular in relation to bone health and calcium accumulation in body tissues (vascular calcification, kidney stone formation). Stable isotope tracers have been used successfully to study bone calcium balance during space-flight and in-bed-rest studies. A long-living calcium radioisotope (41Ca), with a half-life of 9.9×104 years, has been used successfully for labeling of bone calcium to measure bone calcium turnover via urinary excretion of the tracer [189] D. Elmore, M. H. Bhattacharyya, N. Sacco-Gibson, D. P. Peterson. Nucl. Instrum. Methods Phys. Res. Sect. B52, 531 (1990)..
Calcium nearly always occurs in the +2 oxidation state, forming ionic or partly ionic compounds with high lattice energies. Important minerals and materials include calcium carbonate (CaCO₃), calcium sulfate dihydrate (CaSO₄·2H₂O), calcium oxide (CaO), calcium hydroxide (Ca(OH)₂), calcium chloride (CaCl₂), and calcium phosphate phases such as hydroxyapatite (Ca₅(PO₄)₃OH). Calcium hydride (CaH₂) is a useful drying and hydrogen-generating reagent. Calcium forms organometallic reagents, but they are less common than magnesium analogues.
Its natural and prepared compounds are widely used. Quicklime (CaO), which is made by heating limestone that is changed into slaked lime by carefully adding water, is the great base of chemical refinery with countless uses.
When mixed with sand, it hardens mortar and plaster by taking up carbon dioxide from the air. Calcium from limestone is an important element in Portland cement.
Solubility of the carbonate in water containing carbon dioxide is high, which causes the formation of caves with stalactites and stalagmites and is responsible for hardness in water. Other important compounds are the carbide, chloride, cyanamide, hypochlorite, nitrate, and sulfide.
See more information at the Calcium compound page.
Calcium is an essential nutrient, but concentrated calcium metal and many reactive calcium compounds require care. The metal reacts with water and acids to produce flammable H₂ and caustic solutions. Calcium oxide (CaO) and calcium hydroxide (Ca(OH)₂) are strongly alkaline and can burn skin, eyes, and respiratory tissue. Soluble calcium salts are generally of low acute toxicity, although excessive intake or exposure can disturb normal mineral balance. Dust from limestone, cement, or gypsum is mainly a particulate and alkalinity hazard.
Calcium is a major participant in the rock, water, and biological cycles. Weathering releases Ca²⁺ from silicate and carbonate minerals, rivers carry it to lakes and oceans, and it is removed by carbonate precipitation, shell formation, and sedimentation. Calcium affects soil structure and pH buffering and is an essential macronutrient for plants and animals. Acid deposition can leach calcium from soils and alter forest and freshwater ecosystems.
The calcium economy is dominated not by the metal but by abundant minerals and processed materials. Limestone and gypsum are quarried on large scales, while lime is produced by heating calcium carbonate (CaCO₃) to make calcium oxide (CaO). Portland cement production consumes major quantities of calcium-rich feedstocks. Metallic calcium is a smaller specialty product, commonly made by electrolysis or metallothermic reduction routes and used where its strong reducing and scavenging properties justify handling costs. Recycling is indirect, mainly through construction materials, steel slags, and industrial by-products rather than recovery of elemental calcium.
Calcium, a metallic element, is fifth in abundance in the earth's crust, of which it forms more than 3%. It is an essential constituent of leaves, bones, teeth, and shells. Never found in nature uncombined, it occurs abundantly as limestone, gypsum, and fluorite. Apatite is the fluorophosphate or chlorophosphate of calcium.
Calcium is a common cosmic element produced chiefly in massive stars during advanced nuclear burning and dispersed by supernovae. Its spectral lines are prominent in many stars and in interstellar gas. In rocky planets it is concentrated into silicate and carbonate minerals, while in meteorites it occurs in calcium-aluminum-rich inclusions that record very early high-temperature solids in the Solar System.
- Calcium metal is less dense than aluminum but much more chemically reactive.
- The Ca²⁺ ion gives brick-red to orange-red colors in flame tests.
- Hard water is often hard because it contains dissolved calcium and magnesium ions.
- Calcium carbonate can exist as calcite, aragonite, or vaterite, with calcite the most stable at surface conditions.
- Calcium signaling in cells works because free Ca²⁺ concentrations are kept very low in the cytosol.
प्रतिमा
गुणधर्म
भौतिक
- अणुत्रिज्या (अनुभवाधारित)
- 180 pm सर्व घटकांच्या अणुत्रिज्या (अनुभवाधारित) ची तुलना करा →
- सहसंयुजी त्रिज्या
- 176 pm सर्व घटकांच्या सहसंयुजी त्रिज्या ची तुलना करा →
- व्हॅन डर वाल्स त्रिज्या
- 231 pm सर्व घटकांच्या व्हॅन डर वाल्स त्रिज्या ची तुलना करा →
- धात्विक त्रिज्या
- 174 pm सर्व घटकांच्या धात्विक त्रिज्या ची तुलना करा →
- घनता
- 1540 kg/m³ सर्व घटकांच्या घनता ची तुलना करा →
- मोलर आयतन
- 0.0299 L/mol
- STP येथे अवस्था
- घन सर्व घटकांच्या STP येथे अवस्था ची तुलना करा →
- द्रवणांक
- 841.85 °C सर्व घटकांच्या द्रवणांक ची तुलना करा →
- उत्कलनांक
- 1483.85 °C सर्व घटकांच्या उत्कलनांक ची तुलना करा →
- विशिष्ट उष्माधारकता
- 0.647 J/(g·K) सर्व घटकांच्या विशिष्ट उष्माधारकता ची तुलना करा →
- मोलर उष्माधारकता
- 25.929 J/(mol·K) सर्व घटकांच्या मोलर उष्माधारकता ची तुलना करा →
- स्फटिक संरचना
- पृष्ठकेंद्रित घनीय सर्व घटकांच्या स्फटिक संरचना ची तुलना करा →
रासायनिक
- विद्युतऋणता (पॉलिंग)
- 1 सर्व घटकांच्या विद्युतऋणता (पॉलिंग) ची तुलना करा →
- विद्युतऋणता (ॲलन)
- 1.034
- इलेक्ट्रॉन आसक्ती
- 0.0245 eV
- आयनीकरण ऊर्जा (पहिली)
- 6.113155 eV सर्व घटकांच्या आयनीकरण ऊर्जा (पहिली) ची तुलना करा →
- आयनीकरण ऊर्जा (दुसरी)
- 11.87176 eV सर्व घटकांच्या आयनीकरण ऊर्जा (दुसरी) ची तुलना करा →
- आयनीकरण ऊर्जा (तिसरी)
- 50.913335 eV सर्व घटकांच्या आयनीकरण ऊर्जा (तिसरी) ची तुलना करा →
- आयनीकरण ऊर्जा (चौथी)
- 67.273432 eV सर्व घटकांच्या आयनीकरण ऊर्जा (चौथी) ची तुलना करा →
- आयनीकरण ऊर्जा (पाचवी)
- 84.34029 eV सर्व घटकांच्या आयनीकरण ऊर्जा (पाचवी) ची तुलना करा →
- ऑक्सिडीकरण अवस्था
- +1, +2 सर्व घटकांच्या ऑक्सिडीकरण अवस्था ची तुलना करा →
- संयुजा इलेक्ट्रॉन
- 2 सर्व घटकांच्या संयुजा इलेक्ट्रॉन ची तुलना करा →
- इलेक्ट्रॉन संरूपण
- [Ar] 4s2
उष्मागतिक
- द्रवण उष्मा
- 0.08851117 eV सर्व घटकांच्या द्रवण उष्मा ची तुलना करा →
- बाष्पीभवन उष्मा
- 1.603358 eV सर्व घटकांच्या बाष्पीभवन उष्मा ची तुलना करा →
- संप्लवन उष्मा
- 1.846919 eV
- अणूकरण उष्मा
- 1.846919 eV
- अणूकरण एन्थाल्पी
- 1.842773 eV
केंद्रकीय
- प्रोटॉन
- 20 सर्व घटकांच्या प्रोटॉन ची तुलना करा →
- न्यूट्रॉन
- 24 सर्व घटकांच्या न्यूट्रॉन ची तुलना करा →
- ज्ञात समस्थानिके
- 29 सर्व घटकांच्या ज्ञात समस्थानिके ची तुलना करा →
- स्थिर समस्थानिके
- 4 सर्व घटकांच्या स्थिर समस्थानिके ची तुलना करा →
- सर्वाधिक स्थिर समस्थानिक
- Ca-44
- शोधाचे वर्ष
- 1808
विपुलता
- विपुलता (पृथ्वीचे कवच)
- 4.15e+4 mg/kg सर्व घटकांच्या विपुलता (पृथ्वीचे कवच) ची तुलना करा →
- विपुलता (महासागर)
- 412 mg/L सर्व घटकांच्या विपुलता (महासागर) ची तुलना करा →
स्फटिक संरचना
- जालक स्थिरांक a
- 558 pm
इलेक्ट्रॉन संरचना
- प्रत्येक कवचातील इलेक्ट्रॉन
- 2, 8, 8, 2 सर्व घटकांच्या प्रत्येक कवचातील इलेक्ट्रॉन ची तुलना करा →
ओळखचिन्हे
- CAS क्रमांक
- 7440-70-2 सर्व घटकांच्या CAS क्रमांक ची तुलना करा →
- टर्म चिन्ह
- 1S0
- InChI
- InChI=1S/Ca
- InChI की
- OYPRJOBELJOOCE-UHFFFAOYSA-N
इलेक्ट्रॉन संरूपण मोजलेले
Ca: 4s²[Ar] 4s²1s² 2s² 2p⁶ 3s² 3p⁶ 4s²अणुप्रतिमान
समस्थानिकांमुळे न्यूट्रॉन संख्या, वस्तुमान आणि स्थैर्य बदलते — विद्युतदृष्ट्या उदासीन अणूचे इलेक्ट्रॉन संरूपण बदलत नाही.
योजनात्मक अणुप्रतिमान, प्रमाणानुसार नाही.
अणूची विशिष्ट ओळख
उत्सर्जन / शोषण वर्णपट
समस्थानिक वितरण
| वस्तुमानांक | अणुवस्तुमान (u) | नैसर्गिक विपुलता | अर्धायुष्य |
|---|---|---|---|
| 42 स्थिर | ४१.९५८६१७८३ ± ०.००००००१६ | 0.6470% | स्थिर |
| 43 स्थिर | ४२.९५८७६६४४ ± ०.००००००२४ | 0.1350% | स्थिर |
| 44 स्थिर | ४३.९५५४८१५६ ± ०.००००००३५ | 2.0860% | स्थिर |
| 46 स्थिर | ४५.९५३६८९ ± ०.०००००२४ | 0.0040% | स्थिर |
अवस्था / स्थिती
कारण: द्रवणांकापेक्षा (841.85 °C) 816.9 °C कमी
योजनात्मक, प्रमाणानुसार नाही
अवस्थांतर बिंदू
अवस्थांतर ऊर्जा
द्रवणांकावर 1 mol वितळवण्यासाठी आवश्यक ऊर्जा
उत्कलनांकावर 1 mol चे बाष्पीभवन करण्यासाठी आवश्यक ऊर्जा
संप्लवनांकावर 1 mol चे संप्लवन करण्यासाठी आवश्यक ऊर्जा
घनता
प्रमाणित परिस्थितीत
प्रमाणित परिस्थितीत
अणुवर्णपट
20 पैकी 10 दाखवले आहेत. आयनाच्या विद्युतभारानुसार चढत्या क्रमाने मांडलेले.
वर्णरेषांचा संग्रह ?
| आयन | विद्युतभार | एकूण वर्णरेषा | संक्रमण संभाव्यता | पातळ्यांची नामांकने |
|---|---|---|---|---|
| Ca I | 0 | 206 | 136 | 137 |
| Ca II | +1 | 149 | 99 | 99 |
| Ca III | +2 | 676 | 530 | 676 |
| Ca IV | +3 | 40 | 3 | 3 |
| Ca V | +4 | 53 | 18 | 18 |
| Ca VI | +5 | 20 | 18 | 20 |
| Ca VII | +6 | 18 | 18 | 18 |
| Ca VIII | +7 | 6 | 6 | 6 |
| Ca IX | +8 | 26 | 26 | 26 |
| Ca X | +9 | 25 | 25 | 25 |
ऊर्जा पातळ्यांचा संग्रह ?
| आयन | विद्युतभार | पातळ्या |
|---|---|---|
| Ca I | 0 | 787 |
| Ca II | +1 | 72 |
| Ca III | +2 | 182 |
| Ca IV | +3 | 71 |
| Ca V | +4 | 40 |
| Ca VI | +5 | 32 |
| Ca VII | +6 | 27 |
| Ca VIII | +7 | 38 |
| Ca IX | +8 | 72 |
| Ca X | +9 | 52 |
आयनिक त्रिज्या
| विद्युतभार | समन्वय | प्रचक्रण | त्रिज्या |
|---|---|---|---|
| +2 | 6 | उपलब्ध नाही | 100 pm |
| +2 | 7 | उपलब्ध नाही | 106 pm |
| +2 | 8 | उपलब्ध नाही | 112.00000000000001 pm |
| +2 | 9 | उपलब्ध नाही | 118 pm |
| +2 | 10 | उपलब्ध नाही | 123 pm |
| +2 | 12 | उपलब्ध नाही | 134 pm |
संयुगे
समस्थानिके (4)
| वस्तुमानांक | अणुवस्तुमान (u) | नैसर्गिक विपुलता | अर्धायुष्य | क्षय प्रकार | |
|---|---|---|---|---|---|
| 42 स्थिर | ४१.९५८६१७८३ ± ०.००००००१६ | 0.6470% ± 0.0230% | स्थिर | stable | |
| 43 स्थिर | ४२.९५८७६६४४ ± ०.००००००२४ | 0.1350% ± 0.0100% | स्थिर | stable | |
| 44 स्थिर | ४३.९५५४८१५६ ± ०.००००००३५ | 2.0860% ± 0.1100% | स्थिर | stable | |
| 46 स्थिर | ४५.९५३६८९ ± ०.०००००२४ | 0.0040% ± 0.0030% | स्थिर | stable |
वर्णरेषा
247 पैकी 50 दाखवले आहेत. मूलभूत सेटिंगनुसार केवळ मोजलेली तीव्रता असलेल्या वर्णरेषा दाखवल्या जातात.
| तरंगलांबी (nm) | तीव्रता | आयनीकरण टप्पा | प्रकार | संक्रमण | अचूकता | स्रोत | |
|---|---|---|---|---|---|---|---|
| 408.1762 nm | 1000 | Ca III | emission | 3s2.3p5.4s 1P* → 3s2.3p5.4p 3S | मोजलेले | NIST | |
| 449.9885 nm | 1000 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4d 2[5/2]* → 3s2.3p5.(2P*<1/2>).4f 2[7/2] | मोजलेले | NIST | |
| 420.7216 nm | 800 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[3/2]* → 3s2.3p5.(2P*<3/2>).4f 2[5/2] | मोजलेले | NIST | |
| 430.2803 nm | 800 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<3/2>).4f 2[9/2] | मोजलेले | NIST | |
| 439.9584 nm | 800 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<3/2>).4f 2[9/2] | मोजलेले | NIST | |
| 423.3736 nm | 700 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[9/2] → 3s2.3p5.(2P*<3/2>).5g 2[11/2]* | मोजलेले | NIST | |
| 440.6286 nm | 700 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4d 2[5/2]* → 3s2.3p5.(2P*<1/2>).4f 2[7/2] | मोजलेले | NIST | |
| 451.6586 nm | 700 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4d 2[3/2]* → 3s2.3p5.(2P*<1/2>).4f 2[5/2] | मोजलेले | NIST | |
| 457.2125 nm | 700 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<3/2>).4f 2[7/2] | मोजलेले | NIST | |
| 424.0742 nm | 600 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[9/2] → 3s2.3p5.(2P*<3/2>).5g 2[11/2]* | मोजलेले | NIST | |
| 443.129 nm | 600 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<3/2>).4f 2[7/2] | मोजलेले | NIST | |
| 415.3566 nm | 500 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[1/2]* → 3s2.3p5.(2P*<3/2>).4f 2[3/2] | मोजलेले | NIST | |
| 418.42 nm | 500 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[1/2]* → 3s2.3p5.(2P*<3/2>).4f 2[3/2] | मोजलेले | NIST | |
| 428.4388 nm | 500 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4f 2[7/2] → 3s2.3p5.(2P*<1/2>).5g 2[9/2]* | मोजलेले | NIST | |
| 432.9182 nm | 490 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[7/2] → 3s2.3p5.(2P*<3/2>).5g 2[9/2]* | मोजलेले | NIST | |
| 433.3566 nm | 480 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[7/2] → 3s2.3p5.(2P*<3/2>).5g 2[9/2]* | मोजलेले | NIST | |
| 416.4302 nm | 430 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[3/2] → 3s2.3p5.(2P*<3/2>).5g 2[5/2]* | मोजलेले | NIST | |
| 417.565 nm | 410 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<3/2>).4f 2[7/2] | मोजलेले | NIST | |
| 427.189 nm | 410 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4f 2[5/2] → 3s2.3p5.(2P*<1/2>).5g 2[7/2]* | मोजलेले | NIST | |
| 435.8366 nm | 410 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[3/2]* → 3s2.3p5.(2P*<1/2>).4f 2[5/2] | मोजलेले | NIST | |
| 421.3132 nm | 400 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[1/2]* → 3s2.3p5.(2P*<3/2>).4f 2[3/2] | मोजलेले | NIST | |
| 413.6247 nm | 390 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[3/2] → 3s2.3p5.(2P*<3/2>).5g 2[5/2]* | मोजलेले | NIST | |
| 427.9722 nm | 360 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4f 2[7/2] → 3s2.3p5.(2P*<1/2>).5g 2[9/2]* | मोजलेले | NIST | |
| 430.1494 nm | 290 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[3/2]* → 3s2.3p5.(2P*<3/2>).4f 2[3/2] | मोजलेले | NIST | |
| 429.0071 nm | 280 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[5/2] → 3s2.3p5.(2P*<3/2>).5g 2[7/2]* | मोजलेले | NIST | |
| 427.8215 nm | 270 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<3/2>).4f 2[7/2] | मोजलेले | NIST | |
| 430.101 nm | 240 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4f 2[5/2] → 3s2.3p5.(2P*<1/2>).5g 2[7/2]* | मोजलेले | NIST | |
| 393.3663 nm | 230 | Ca II | emission | 3p6.4s 2S → 3p6.4p 2P* | मोजलेले | NIST | |
| 394.9609 nm | 230 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<1/2>).4f 2[7/2] | मोजलेले | NIST | |
| 396.8469 nm | 220 | Ca II | emission | 3p6.4s 2S → 3p6.4p 2P* | मोजलेले | NIST | |
| 427.3875 nm | 200 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<3/2>).4f 2[7/2] | मोजलेले | NIST | |
| 527.1979 nm | 170 | Ca III | emission | 3s2.3p5.(2P*<3/2>).5p 2[5/2] → 3s2.3p5.(2P*<3/2>).5d 2[7/2]* | मोजलेले | NIST | |
| 403.8502 nm | 160 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[1/2]* → 3s2.3p5.(2P*<3/2>).4f 2[5/2] | मोजलेले | NIST | |
| 382.376 nm | 150 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<1/2>).4f 2[7/2] | मोजलेले | NIST | |
| 448.4948 nm | 150 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<3/2>).4f 2[5/2] | मोजलेले | NIST | |
| 470.8836 nm | 150 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<3/2>).4f 2[5/2] | मोजलेले | NIST | |
| 471.6287 nm | 130 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<3/2>).4f 2[9/2] | मोजलेले | NIST | |
| 606.9998 nm | 110 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[7/2]* → 3s2.3p5.(2P*<3/2>).5p 2[5/2] | मोजलेले | NIST | |
| 524.7373 nm | 100 | Ca III | emission | 3s2.3p5.(2P*<3/2>).5p 2[5/2] → 3s2.3p5.(2P*<3/2>).5d 2[7/2]* | मोजलेले | NIST | |
| 393.0884 nm | 90 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[5/2]* → 3s2.3p5.(2P*<1/2>).4f 2[5/2] | मोजलेले | NIST | |
| 485.9165 nm | 90 | Ca III | emission | 3s2.3p5.(2P*<3/2>).5p 2[5/2] → 3s2.3p5.(2P*<3/2>).6s 2[3/2]* | मोजलेले | NIST | |
| 500.8939 nm | 90 | Ca III | emission | 3s2.3p5.(2P*<3/2>).5p 2[1/2] → 3s2.3p5.(2P*<3/2>).5d 2[1/2]* | मोजलेले | NIST | |
| 532.1287 nm | 90 | Ca III | emission | 3s2.3p5.(2P*<3/2>).5p 2[3/2] → 3s2.3p5.(2P*<3/2>).5d 2[5/2]* | मोजलेले | NIST | |
| 434.0345 nm | 80 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4f 2[7/2] → 3s2.3p5.(2P*<3/2>).5g 2[7/2]* | मोजलेले | NIST | |
| 441.3732 nm | 80 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4d 2[5/2]* → 3s2.3p5.(2P*<1/2>).4f 2[5/2] | मोजलेले | NIST | |
| 450.8788 nm | 80 | Ca III | emission | 3s2.3p5.(2P*<1/2>).4d 2[3/2]* → 3s2.3p5.(2P*<1/2>).4f 2[7/2] | मोजलेले | NIST | |
| 463.2855 nm | 80 | Ca III | emission | 3s2.3p5.(2P*<1/2>).5p 2[3/2] → 3s2.3p5.(2P*<1/2>).5d 2[3/2]* | मोजलेले | NIST | |
| 501.9971 nm | 80 | Ca II | emission | 3p6.5p 2P* → 3p6.6d 2D | मोजलेले | NIST | |
| 505.0089 nm | 80 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[3/2]* → 3s2.3p5.(2P*<3/2>).4f 2[5/2] | मोजलेले | NIST | |
| 557.0601 nm | 80 | Ca III | emission | 3s2.3p5.(2P*<3/2>).4d 2[3/2]* → 3s2.3p5.(2P*<3/2>).5p 2[3/2] | मोजलेले | NIST |
विस्तारित गुणधर्म
सहसंयुजी त्रिज्या (विस्तारित)
- सहसंयुजी त्रिज्या (प्युक्को)
- 171 pm
- सहसंयुजी त्रिज्या (प्युक्को, दुहेरी बंध)
- 147 pm
- सहसंयुजी त्रिज्या (प्युक्को, तिहेरी बंध)
- 133 pm
- सहसंयुजी त्रिज्या (ब्रॅग)
- 170 pm
व्हॅन डर वाल्स त्रिज्या
- Truhlar
- 231 pm
- Batsanov
- 240 pm
- Alvarez
- 262 pm
- UFF
- 339.9 pm
- MM3
- 281 pm
अणुत्रिज्या आणि धात्विक त्रिज्या
- अणुत्रिज्या (राह्म)
- 270 pm
- धात्विक त्रिज्या (C12)
- 197 pm
क्रमांकन मापनपट्ट्या
- Mendeleev
- 7
- Pettifor
- 16
- Glawe
- 16
विद्युतऋणता मापनपट्ट्या
- Ghosh
- 0
- Miedema
- 3
- Gunnarsson–Lundqvist
- 3
- Robles–Bartolotti
- 2
ध्रुवणक्षमता आणि अपस्करण
- द्विध्रुव ध्रुवणक्षमता
- 160.8 a.u.
- द्विध्रुव ध्रुवणक्षमता (अनिश्चितता)
- 4 a.u.
- C₆
- 2163 Ha·Bohr6
- C₆ (Gould–Bučko)
- 2230 Ha·Bohr6
मिडेमा प्राचल
- मिडेमा मोलर आयतन
- 26.2 cm3/mol
- मिडेमा इलेक्ट्रॉन घनता
- 1
पुरवठा जोखीम आणि अर्थकारण
- उत्पादनाचे केंद्रीकरण
- 65
- सापेक्ष पुरवठा जोखीम
- 6
- राजकीय स्थैर्य (प्रमुख उत्पादक)
- 24
अवस्थांतरे आणि अपरूपे
| द्रवणांक | 1115.15 K |
| उत्कलनांक | 1757.15 K |
ऑक्सिडीकरण अवस्थांचे वर्ग
प्रगत संदर्भ माहिती
परिरक्षण स्थिरांक (6)
| n | कक्षिका | σ |
|---|---|---|
| 1 | s | 0.527 |
| 2 | p | 3.9586 |
| 2 | s | 6.2236 |
| 3 | p | 11.3417 |
| 3 | s | 10.3985 |
| 4 | s | 15.602 |
स्फटिक त्रिज्यांचा तपशील (6)
| विद्युतभार | CN | प्रचक्रण | rcrystal (pm) | उत्पत्ती |
|---|---|---|---|---|
| 2 | VI | 114 | ||
| 2 | VII | 120 | ||
| 2 | VIII | 126 | ||
| 2 | IX | 132 | ||
| 2 | X | 137 | calculated, | |
| 2 | XII | 148 | calculated, |
समस्थानिक क्षय प्रकार (50)
| समस्थानिक | मोड | तीव्रता |
|---|---|---|
| 33 | p | — |
| 34 | 2p | — |
| 35 | B+ | 100% |
| 35 | B+p | 95.8% |
| 35 | 2p | 4.2% |
| 36 | B+ | 100% |
| 36 | B+p | 51.2% |
| 37 | B+ | 100% |
| 37 | B+p | 76.8% |
| 38 | B+ | 100% |
क्ष-किरण प्रकीर्णन गुणक (504)
| ऊर्जा (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 0.0428 |
| 10.1617 | — | 0.04527 |
| 10.3261 | — | 0.04788 |
| 10.4931 | — | 0.05063 |
| 10.6628 | — | 0.05355 |
| 10.8353 | — | 0.05663 |
| 11.0106 | — | 0.05989 |
| 11.1886 | — | 0.06334 |
| 11.3696 | — | 0.06634 |
| 11.5535 | — | 0.06922 |
अतिरिक्त माहिती
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
4.15×104 milligrams per kilogram
संदर्भ (1)
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
4.12×102 milligrams per liter
संदर्भ (1)
Sources
Sources of this element.
Calcium, a metallic element, is fifth in abundance in the earth's crust, of which it forms more than 3%. It is an essential constituent of leaves, bones, teeth, and shells. Never found in nature uncombined, it occurs abundantly as limestone, gypsum, and fluorite. Apatite is the fluorophosphate or chlorophosphate of calcium.
संदर्भ (1)
- [6] Calcium https://periodic.lanl.gov/20.shtml
संदर्भ
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Calcium.
The element property data was retrieved from publications.