Phosphorus (P)
nonmetalSolid
Nguyên tử khối chuẩn
30,973762 uCấu hình electron
[Ne] 3s2 3p3Nhiệt độ nóng chảy
44,15 °CNhiệt độ sôi
280,5 °CKhối lượng riêng
1820 kg/m³Trạng thái oxi hóa
−3, −2, −1, 0, +1, +2, +3, +4, +5Độ âm điện (Pauling)
2,19Năng lượng ion hóa (lần 1)
10,486686 eVNăm phát hiện
1669Bán kính nguyên tử
100 pmChi tiết
Phosphorus is a reactive nonmetal in group 15 and is essential to life as a component of nucleic acids, phospholipids, and energy-transfer molecules. It does not occur naturally as the free element because it is readily oxidized, but it is abundant in phosphate minerals. Elemental phosphorus is notable for its several allotropes, especially highly reactive white phosphorus and more stable red and black forms.
Phosphorus exists in four or more allotropic forms: white (or yellow), red, and black (or violet). Ordinary phosphorus is a waxy white solid; when pure it is colorless and transparent. White phosphorus has two modifications: alpha and beta with a transition temperature at -3.8°C.
It is insoluble in water, but soluble in carbon disulfide. It takes fire spontaneously in air, burning to the pentoxide.
The name derives from the Greek phosphoros for "bringing light" because it has the property of glowing in the dark. This was also the ancient name for the planet Venus, when it appears before sunrise. Phosphorus was discovered by the German merchant Hennig Brand in 1669.
In what is perhaps the most disgusting method of discovering an element, phosphorus was first isolated in 1669 by Hennig Brand, a German physician and alchemist, by boiling, filtering and otherwise processing as many as 60 buckets of urine. Thankfully, phosphorus is now primarily obtained from phosphate rock (Ca3(PO4)2).
From the Greek phosphoros, light bearing; ancient name for the planet Venus when appearing before sunrise. Brand discovered phosphorus in 1669 by preparing it from urine.
White phosphorus consists of soft, waxy, pale material made of P₄ molecules and may glow faintly in air. Red phosphorus is a dark red to violet amorphous or polymeric solid. Black phosphorus is a layered, dark, graphite-like crystalline solid and is the most thermodynamically stable allotrope at ordinary conditions.
Most phosphorus is used indirectly through phosphate compounds, especially fertilizers, animal feed supplements, detergents where permitted, food additives, and industrial phosphates. Elemental white phosphorus has military use in smoke, illumination, and incendiary munitions, subject to legal restrictions. Red phosphorus is used on safety-match striking surfaces, in some flame-retardant systems, and as a reagent in chemical synthesis. Black phosphorus is studied for electronic and optoelectronic materials, but it is not a bulk commodity.
Phosphorus has three main allotropes: white, red and black. White phosphorus is poisonous and can spontaneously ignite when it comes in contact with air. For this reason, white phosphorus must be stored under water and is usually used to produce phosphorus compounds. Red phosphorus is formed by heating white phosphorus to 250°C (482°F) or by exposing white phosphorus to sunlight. Red phosphorus is not poisonous and is not as dangerous as white phosphorus, although frictional heating is enough to change it back to white phosphorus. Red phosphorus is used in safety matches, fireworks, smoke bombs and pesticides. Black phosphorus is also formed by heating white phosphorus, but a mercury catalyst and a seed crystal of black phosphorus are required. Black phosphorus is the least reactive form of phosphorus and has no significant commercial uses.
Phosphoric acid (H3PO4) is used in soft drinks and to create many phosphate compounds, such as triple superphosphate fertilizer (Ca(H2PO4)2·H2O). Trisodium phosphate (Na3PO4) is used as a cleaning agent and as a water softener. Calcium phosphate (Ca3(PO4)2) is used to make china and in the production of baking powder. Some phosphorus compounds glow in the dark or emit light in response to absorbing radiation and are used in fluorescent light bulbs and television sets.
In recent years, concentrated phosphoric acids, which may contain as much as 70% to 75% P2O5 content, have become of great importance to agriculture and farm production. World-wide demand for fertilizers has caused record phosphate production. Phosphates are used in the production of special glasses, such as those used for sodium lamps.
Bone-ash calcium phosphate is used to create fine chinaware and to produce mono-calcium phosphate, used in baking powder.
Phosphorus is also important in the production of steels, phosphor bronze, and many other products. Trisodium phosphate is important as a cleaning agent, as a water softener, and for preventing boiler scale and corrosion of pipes and boiler tubes.
Phosphorus is also an essential ingredient of all cell protoplasm, nervous tissue, and bones.
Isotopes in Biology
32P (half-life of 14.3 days) is a radioactive isotope of phosphorus that is used to help understand the biological and chemical processes in plants. It is chemically identical to other isotopes of phosphorous and can be substituted in biological and chemical reactions. For example, a phosphate solution containing 32P (which has the identical behavior of non-radioactive 31P) can be inserted into the roots of a plant and its movement can then be tracked throughout the plant with the use of a Geiger counter. This movement detection study helps scientists to better understand how plants use phosphorous to reproduce and grow [131] B. Singh, J. Singh, A. Kaur. Int. J. Biotechnol. Bioeng. Res.4, 167 (2013)., [132] S. N. Levine, M. P. Stainton, D. W. Schindler. Can. J. Fish. Aquat.Sci.43, 366 (1986)..
At the molecular level, 32P can substitute for 31P in nucleotides of DNA or RNA (ribonucleic acid, a single stranded molecule that regulates genes). Radioactive probes can be created to help identify the presence, absence, and quantity of genes in a system [133] E. K. J. Pauwels, F. J. Cleton. Radiother. Oncol.1, 333 (1984)., [134] C. B. Wilson, A. A. Epenetos. Baillieres Clin. Gastroenterol.1, 115 (1987)..
Isotopes in Earth/Planetary Science
32P has been used as a tracer to help determine phosphorus nutrient cycling in eutrophied lakes (lakes rich in organic and mineral nutrients commonly leading to the excessive growth of phytoplankton, a self-feeding water organism) (Fig. IUPAC.15.1). In one experiment, phosphoric acid labeled with 32P was added to a lake that had been experimentally eutrophied. 32P was measured in microphytoplankton (plankton visible only with a microscope), phytoplankton, and zooplankton (tiny animals that live suspended in fresh or salt water), and the amount of incorporated 32P was determined [132] S. N. Levine, M. P. Stainton, D. W. Schindler. Can. J. Fish. Aquat.Sci.43, 366 (1986)..
33P has been used to better understand phosphorus dynamics in the environment at the sediment-surface level. Phosphorus is a necessary nutrient for many biota (the plant and animal life of a particular habitat, region, or geological period). Understanding bioavailability and sorption (bonding) of this nutrient to particles in soil is important for understanding ecosystem health. Organic and inorganic phosphorus substrates isotopically labeled with 33P can be tracked within a sediment system to determine their transport properties and availability to biota [135] L. Tuominen, H. Hartikainen, T. Kairesalo, P. Tallberg. Water Res.32, 2001 (1998)..
Isotopes in Industry
32P was added to tires in the 1950s by Goodrich Laboratories to help determine the location and depth of tire wear in performance tests [136] Popular Science Monthly: Mechanic and Handicraft, 91 (1951)..
Isotopes in Medicine
Beta emissions from the radioactive isotope 32P can be used in drug therapy of cancerous bone masses. By injecting a patient with a 32P pharmaceutical, tumors and other cells can be targeted for cell death, which also helps to alleviate pain [137] E. B. Silberstein, A. H. Elgazzar, A. Kapilivsky. Semin. Nucl. Med.22, 17 (1992)., [138] S. C. Srivastava. Braz. Arch. Biol. Technol.45, 45 (2002).. For example, Polycythemia vera is the condition of having excess red blood cells in the bone marrow: 32P can be used to treat this condition by reducing the number of red blood cells. However, there is no cure for this condition [139] Mayo Clinic staff. Polycythemia Vera: Treatments and Drugs, Mayo Clinic (2017), April 4; http://www.mayoclinic.org/diseases-conditions/polycythemia-vera/diagnosis-treatment/treatment/txc-20307498.. Using a 32P labeled bio-silicone product, 32P has been used as the radioactive target in brachytherapy of solid tumors in the lung [140] A. S. W. Goh, A. Y. F. Chung, R. H. G. Lo, T. N. Lau, S. W. K. Yu, M. Chng, S. Satchithanantham, S. L. E. Loong, D. C. E. Ng, B. C. Lim, S. Connor, P. K. H. Chow. Int. J. Radiat. Oncol. Biol. Phys.67, 786 (2007).. Depending on the type of 32P-labeled compound (antibody or pharmaceutical drug), when it is ingested or injected into the body, specific body parts (blood, tumors, joints, or bones) can be targeted for visualization and imaged using a gamma camera. This is useful for imaging cancer sites and for treatment monitoring of oncologic patients [133] E. K. J. Pauwels, F. J. Cleton. Radiother. Oncol.1, 333 (1984)., [134] C. B. Wilson, A. A. Epenetos. Baillieres Clin. Gastroenterol.1, 115 (1987)., [138] S. C. Srivastava. Braz. Arch. Biol. Technol.45, 45 (2002)..
Phosphorus commonly forms compounds in the −3, +3, and +5 oxidation states. Phosphate chemistry, based on the PO₄³⁻ ion, dominates its geology and biology; calcium phosphate phases include apatite minerals and bone mineral. Phosphoric acid (H₃PO₄) is a major industrial acid and a precursor to many salts. Phosphorus trichloride (PCl₃) and phosphorus pentachloride (PCl₅) are important chlorinating and phosphorus-transfer reagents. Phosphine (PH₃) contains phosphorus in a reduced state and is toxic and flammable.
See more information at the Phosphorus compound page.
White phosphorus is pyrophoric, causes severe chemical burns, and is acutely toxic; it is commonly stored under water or inert atmosphere. Red phosphorus is much less reactive but can ignite if finely divided or contaminated with oxidants. Phosphine (PH₃) is a highly poisonous gas. Phosphate nutrients are biologically necessary, but concentrated acids, salts, dusts, and industrial reagents require normal chemical controls.
Phosphorus is very poisonous, 50 mg constituting an approximate fatal dose. Exposure to white phosphorus should not exceed 0.1 mg/m3 (8-hour time-weighted average per 40-hour work week). White phosphorus should be kept under water (as it is dangerously reactive in air) and should be handled with forceps, as contact with the skin may cause severe burns.
Phosphorus cycles mainly as phosphate in rocks, soils, waters, and organisms. Weathering releases phosphate, while biological uptake and sedimentation return it to soils and aquatic sediments. It is often a limiting nutrient in freshwater and some terrestrial systems. Excess runoff from fertilizers, manure, and wastewater can promote eutrophication and harmful algal growth. There is no significant atmospheric reservoir comparable to nitrogen.
Phosphorus supply is based chiefly on mining phosphate rock, especially apatite-rich sedimentary deposits and some igneous deposits. Most mined material is converted to phosphoric acid (H₃PO₄) or processed directly for fertilizer production. Elemental phosphorus is made industrially by reducing phosphate rock with carbon in electric furnaces in the presence of silica, but this route is energy intensive and serves smaller chemical markets. Supply concerns focus on ore grade, impurities such as cadmium or uranium in some deposits, transport costs, and the concentration of high-quality reserves. Recycling from manure, sewage sludge, and food-system wastes is increasingly important but not yet a full substitute for mined phosphate.
Never found free in nature, it is widely distributed in combination with minerals. Phosphate rock, which contains the mineral apatite, an impure tri-calcium phosphate, is an important source of the element. Large deposits are found in Russia, in Morocco, and in Florida, Tennessee, Utah, Idaho, and elsewhere.
Phosphorus is far less abundant cosmically than carbon, nitrogen, oxygen, or sulfur. It is produced in massive stars and supernova-related nucleosynthesis and is incorporated into interstellar dust, meteorites, and planetary crusts. In the Solar System it occurs mainly in phosphate minerals and, in reduced meteoritic settings, in phosphides such as schreibersite.
- White phosphorus was historically called a light-bearing substance because it slowly oxidizes and glows in moist air.
- Safety matches separate the oxidizer in the match head from red phosphorus on the striking surface.
- Black phosphorus can be exfoliated into phosphorene, a two-dimensional semiconductor studied in research.
- Phosphate rock may contain variable trace metals, so ore source affects fertilizer impurity profiles.
- Phosphorus has only one stable isotope, ³¹P.
Hình ảnh
Tính chất
Vật lý
- Bán kính nguyên tử (thực nghiệm)
- 100 pm So sánh Bán kính nguyên tử (thực nghiệm) của tất cả nguyên tố →
- Bán kính cộng hóa trị
- 107 pm So sánh Bán kính cộng hóa trị của tất cả nguyên tố →
- Bán kính van der Waals
- 180 pm So sánh Bán kính van der Waals của tất cả nguyên tố →
- Bán kính kim loại
- 110 pm So sánh Bán kính kim loại của tất cả nguyên tố →
- Khối lượng riêng
- 1820 kg/m³ So sánh Khối lượng riêng của tất cả nguyên tố →
- Thể tích mol
- 0,017 L/mol
- Pha ở STP
- Rắn So sánh Pha ở STP của tất cả nguyên tố →
- Nhiệt độ nóng chảy
- 44,15 °C So sánh Nhiệt độ nóng chảy của tất cả nguyên tố →
- Nhiệt độ sôi
- 280,5 °C So sánh Nhiệt độ sôi của tất cả nguyên tố →
- Nhiệt dung riêng
- 0,769 J/(g·K) So sánh Nhiệt dung riêng của tất cả nguyên tố →
- Nhiệt dung mol
- 23,824 J/(mol·K) So sánh Nhiệt dung mol của tất cả nguyên tố →
- Cấu trúc tinh thể
- Lập phương So sánh Cấu trúc tinh thể của tất cả nguyên tố →
Hóa học
- Độ âm điện (Pauling)
- 2,19 So sánh Độ âm điện (Pauling) của tất cả nguyên tố →
- Độ âm điện (Allen)
- 2,253
- Ái lực electron
- 0,7466 eV
- Năng lượng ion hóa (lần 1)
- 10,486686 eV So sánh Năng lượng ion hóa (lần 1) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 2)
- 19,769558 eV So sánh Năng lượng ion hóa (lần 2) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 3)
- 30,202744 eV So sánh Năng lượng ion hóa (lần 3) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 4)
- 51,444047 eV So sánh Năng lượng ion hóa (lần 4) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 5)
- 65,025334 eV So sánh Năng lượng ion hóa (lần 5) của tất cả nguyên tố →
- Trạng thái oxi hóa
- −3, −2, −1, 0, +1, +2, +3, +4, +5 So sánh Trạng thái oxi hóa của tất cả nguyên tố →
- Electron hóa trị
- 5 So sánh Electron hóa trị của tất cả nguyên tố →
- Các dạng thù hình
- ["red", "white"]
- Cấu hình electron
- [Ne] 3s2 3p3
Nhiệt động lực học
- Điểm tới hạn (nhiệt độ)
- 721 °C
- Nhiệt nóng chảy
- 0,00684044 eV So sánh Nhiệt nóng chảy của tất cả nguyên tố →
- Nhiệt hóa hơi
- 0,12851739 eV So sánh Nhiệt hóa hơi của tất cả nguyên tố →
- Nhiệt thăng hoa
- 3,271597 eV
- Nhiệt nguyên tử hóa
- 3,271597 eV
- Enthalpy nguyên tử hóa
- 3,280303 eV
Hạt nhân
- Proton
- 15 So sánh Proton của tất cả nguyên tố →
- Neutron
- 16 So sánh Neutron của tất cả nguyên tố →
- Các đồng vị đã biết
- 24 So sánh Các đồng vị đã biết của tất cả nguyên tố →
- Đồng vị bền
- 1 So sánh Đồng vị bền của tất cả nguyên tố →
- Đồng vị bền nhất
- P-31
- Năm phát hiện
- 1669
Độ phổ biến
- Độ phổ biến (vỏ Trái Đất)
- 1050 mg/kg So sánh Độ phổ biến (vỏ Trái Đất) của tất cả nguyên tố →
- Độ phổ biến (đại dương)
- 0,06 mg/L So sánh Độ phổ biến (đại dương) của tất cả nguyên tố →
Cấu trúc tinh thể
- Hằng số mạng a
- 717 pm
Cấu trúc electron
- Số electron trong mỗi lớp
- 2, 8, 5 So sánh Số electron trong mỗi lớp của tất cả nguyên tố →
Mã định danh
- Số CAS
- 7723-14-0 So sánh Số CAS của tất cả nguyên tố →
- Ký hiệu số hạng
- 4S°3/2
- InChI
- InChI=1S/P
- Khóa InChI
- OAICVXFJPJFONN-UHFFFAOYSA-N
Cấu hình electron Đo đạc
P: 3s² 3p³[Ne] 3s² 3p³1s² 2s² 2p⁶ 3s² 3p³Mô hình nguyên tử
Các đồng vị khác nhau về số neutron, khối lượng và độ bền — không khác nhau về cấu hình electron của nguyên tử trung hòa.
Mô hình nguyên tử minh họa, không theo tỷ lệ.
Dấu vân tay nguyên tử
Phổ phát xạ / hấp thụ
Phân bố đồng vị
| Số khối | Khối lượng nguyên tử (u) | Độ phổ biến tự nhiên | Chu kỳ bán rã |
|---|---|---|---|
| 31 Bền | 30,97376199842 ± 0,0000000007 | 100,0000% | Bền |
Pha / Trạng thái
Lý do: thấp hơn nhiệt độ nóng chảy (44,15 °C) một lượng 19,2 °C
Sơ đồ minh họa, không theo tỷ lệ
Điểm chuyển pha
Năng lượng chuyển pha
Năng lượng cần để làm nóng chảy 1 mol tại nhiệt độ nóng chảy
Năng lượng cần để hóa hơi 1 mol tại nhiệt độ sôi
Năng lượng cần để làm thăng hoa 1 mol tại nhiệt độ thăng hoa
Khối lượng riêng
Ở điều kiện chuẩn
Ở điều kiện chuẩn
Nâng cao
Phổ nguyên tử
Đang hiển thị 10 trên 15. Sắp xếp theo điện tích ion (tăng dần).
Dữ liệu vạch phổ ?
| Ion | Điện tích | Tổng số vạch | Xác suất chuyển mức | Ký hiệu mức năng lượng |
|---|---|---|---|---|
| P I | 0 | 258 | 132 | 133 |
| P II | +1 | 100 | 73 | 73 |
| P III | +2 | 70 | 23 | 23 |
| P IV | +3 | 129 | 78 | 78 |
| P V | +4 | 48 | 30 | 30 |
| P VI | +5 | 5 | 5 | 5 |
| P VII | +6 | 3 | 3 | 3 |
| P VIII | +7 | 20 | 20 | 20 |
| P IX | +8 | 47 | 47 | 47 |
| P X | +9 | 26 | 26 | 26 |
Dữ liệu mức năng lượng ?
| Ion | Điện tích | Mức năng lượng |
|---|---|---|
| P I | 0 | 289 |
| P II | +1 | 162 |
| P III | +2 | 129 |
| P IV | +3 | 211 |
| P V | +4 | 68 |
| P VI | +5 | 60 |
| P VII | +6 | 62 |
| P VIII | +7 | 65 |
| P IX | +8 | 48 |
| P X | +9 | 58 |
Bán kính ion
| Điện tích | Phối trí | Spin | Bán kính |
|---|---|---|---|
| +3 | 6 | Không có | 44 pm |
| +5 | 4 | Không có | 17 pm |
| +5 | 5 | Không có | 28.999999999999996 pm |
| +5 | 6 | Không có | 38 pm |
Hợp chất
Đồng vị (1)
| Số khối | Khối lượng nguyên tử (u) | Độ phổ biến tự nhiên | Chu kỳ bán rã | Kiểu phân rã | |
|---|---|---|---|---|---|
| 31 Bền | 30,97376199842 ± 0,0000000007 | 100,0000% | Bền | stable |
Vạch phổ
Đang hiển thị 50 trên 122. Theo mặc định, chỉ hiển thị các vạch phổ có cường độ đã được đo.
| Bước sóng (nm) | Cường độ | Bậc ion hóa | Loại | Chuyển mức | Độ chính xác | Nguồn | |
|---|---|---|---|---|---|---|---|
| 460.2069 nm | 600 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.4d 3F* | Đo đạc | NIST | |
| 422.2198 nm | 500 | P III | emission | 3s2.4s 2S → 3s2.4p 2P* | Đo đạc | NIST | |
| 458.8032 nm | 500 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.4d 3F* | Đo đạc | NIST | |
| 458.9846 nm | 500 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.4d 3F* | Đo đạc | NIST | |
| 494.3497 nm | 500 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 602.418 nm | 500 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3D | Đo đạc | NIST | |
| 604.308 nm | 500 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3D | Đo đạc | NIST | |
| 405.9312 nm | 400 | P III | emission | 3s2.3d 2D → 3s2.4p 2P* | Đo đạc | NIST | |
| 442.0712 nm | 400 | P II | emission | 3s2.3p.4s 1P* → 3s2.3p.4p 1S | Đo đạc | NIST | |
| 529.6077 nm | 400 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3S | Đo đạc | NIST | |
| 542.588 nm | 400 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3P | Đo đạc | NIST | |
| 545.0709 nm | 400 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 603.404 nm | 400 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3D | Đo đạc | NIST | |
| 424.672 nm | 350 | P III | emission | 3s2.4s 2S → 3s2.4p 2P* | Đo đạc | NIST | |
| 608.784 nm | 350 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3D | Đo đạc | NIST | |
| 616.56 nm | 350 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3D | Đo đạc | NIST | |
| 395.7641 nm | 300 | P III | emission | 3s.3p.(3P*).4s 4P* → 3s.3p.(3P*).4p 4P | Đo đạc | NIST | |
| 408.0089 nm | 300 | P III | emission | 3s2.3d 2D → 3s2.4p 2P* | Đo đạc | NIST | |
| 424.9655 nm | 300 | P IV | emission | 3s.4s 1S → 3s.4p 1P* | Đo đạc | NIST | |
| 462.6708 nm | 300 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.4d 3F* | Đo đạc | NIST | |
| 465.8309 nm | 300 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.4d 3F* | Đo đạc | NIST | |
| 495.4367 nm | 300 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 496.9701 nm | 300 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 525.3479 nm | 300 | P II | emission | 3s2.3p.4s 1P* → 3s2.3p.4p 1D | Đo đạc | NIST | |
| 534.4729 nm | 300 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3P | Đo đạc | NIST | |
| 538.6895 nm | 300 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3P | Đo đạc | NIST | |
| 531.6055 nm | 250 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3P | Đo đạc | NIST | |
| 537.8192 nm | 250 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 558.8301 nm | 250 | P II | emission | 3s2.3p.4p 3S → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 605.55 nm | 250 | P II | emission | 3s2.3p.4p 1D → 3s2.3p.5s 1P* | Đo đạc | NIST | |
| 390.4811 nm | 200 | P III | emission | 3s.3p.(3P*).4s 4P* → 3s.3p.(3P*).4p 4P | Đo đạc | NIST | |
| 405.7449 nm | 200 | P III | emission | 3s2.3d 2D → 3s2.4p 2P* | Đo đạc | NIST | |
| 438.5393 nm | 200 | P II | emission | 3s2.3p.4p 1P → 3s2.3p.5s 1P* | Đo đạc | NIST | |
| 447.527 nm | 200 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.4d 3D* | Đo đạc | NIST | |
| 449.923 nm | 200 | P II | emission | 3s2.3p.4p 1D → 3s2.3p.4d 1F* | Đo đạc | NIST | |
| 486.4426 nm | 200 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 540.9722 nm | 200 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3P | Đo đạc | NIST | |
| 548.3519 nm | 200 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 549.9697 nm | 200 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3P | Đo đạc | NIST | |
| 550.7174 nm | 200 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 554.1139 nm | 200 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 558.3235 nm | 200 | P II | emission | 3s2.3p.4p 3P → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 534.5854 nm | 180 | P I | emission | 3s2.3p2.(3P).4s 2P → 3s2.3p2.(3P).5p 2P* | Đo đạc | NIST | |
| 547.7672 nm | 180 | P I | emission | 3s2.3p2.(3P).4s 2P → 3s2.3p2.(3P).5p 2D* | Đo đạc | NIST | |
| 716.547 nm | 180 | P I | emission | 3s2.3p2.(3P).4p 4D* → 3s2.3p2.(3P).5d 4F | Đo đạc | NIST | |
| 717.666 nm | 180 | P I | emission | 3s2.3p2.(3P).4p 4D* → 3s2.3p2.(3P).5d 4F | Đo đạc | NIST | |
| 492.7197 nm | 150 | P II | emission | 3s2.3p.4p 3D → 3s2.3p.5s 3P* | Đo đạc | NIST | |
| 519.1393 nm | 150 | P II | emission | 3s2.3p.4s 3P* → 3s2.3p.4p 3S | Đo đạc | NIST | |
| 510.9625 nm | 140 | P I | emission | 3s2.3p2.(3P).4s 4P → 3s2.3p2.(3P).5p 4P* | Đo đạc | NIST | |
| 515.4842 nm | 140 | P I | emission | 3s2.3p2.(3P).4s 4P → 3s2.3p2.(3P).5p 4D* | Đo đạc | NIST |
Tính chất mở rộng
Bán kính cộng hóa trị (mở rộng)
- Bán kính cộng hóa trị (Pyykkö)
- 111 pm
- Bán kính cộng hóa trị (Pyykkö, liên kết đôi)
- 102 pm
- Bán kính cộng hóa trị (Pyykkö, liên kết ba)
- 94 pm
Bán kính van der Waals
- Bondi
- 180 pm
- Batsanov
- 195 pm
- Alvarez
- 190 pm
- UFF
- 414,7 pm
- MM3
- 222 pm
- Dreiding
- 415 pm
Bán kính nguyên tử và kim loại
- Bán kính nguyên tử (Rahm)
- 223 pm
- Bán kính kim loại (C12)
- 128 pm
Các thang đánh số
- Mendeleev
- 94
- Pettifor
- 90
- Glawe
- 89
Các thang độ âm điện
- Ghosh
- 0
- Miedema
- 6
- Gunnarsson–Lundqvist
- 5
- Robles–Bartolotti
- 4
Độ phân cực hóa và tán sắc
- Độ phân cực hóa lưỡng cực
- 25 a.u.
- Độ phân cực hóa lưỡng cực (độ không đảm bảo)
- 1 a.u.
- C₆
- 185 Ha·Bohr6
- C₆ (Gould–Bučko)
- 187 Ha·Bohr6
Ái lực hóa học
- Ái lực proton
- 626,8 kJ/mol
- Độ bazơ pha khí
- 604,8 kJ/mol
Thông số Miedema
- Thể tích mol Miedema
- 8,6 cm3/mol
- Mật độ electron Miedema
- 4
Rủi ro nguồn cung và kinh tế
- Mức độ tập trung sản xuất
- 39
- Rủi ro nguồn cung tương đối
- 5
- Phân bố trữ lượng
- 45
- Ổn định chính trị (quốc gia sản xuất lớn nhất)
- 24
- Ổn định chính trị (quốc gia có trữ lượng lớn nhất)
- 29
Chuyển pha và các dạng thù hình
| Nhiệt độ nóng chảy | 317,3 K |
| Nhiệt độ sôi | 553,65 K |
| Điểm tới hạn (nhiệt độ) | 994,15 K |
| Nhiệt độ nóng chảy | 852,35 K |
| Nhiệt độ sôi | 704,15 K |
| Điểm tới hạn (nhiệt độ) | 994,15 K |
Phân loại trạng thái oxi hóa
Dữ liệu tham khảo chuyên sâu
Hằng số chắn (5)
| n | Orbital | σ |
|---|---|---|
| 1 | s | 0,4422 |
| 2 | p | 4,0388 |
| 2 | s | 5,175 |
| 3 | p | 10,1136 |
| 3 | s | 9,3582 |
Chi tiết bán kính tinh thể (4)
| Điện tích | CN | Spin | rcrystal (pm) | Nguồn gốc |
|---|---|---|---|---|
| 3 | VI | 58 | Ahrens (1952) ionic radius, | |
| 5 | IV | 31 | ||
| 5 | V | 43 | ||
| 5 | VI | 52 | calculated, |
Các kiểu phân rã đồng vị (50)
| Đồng vị | Chế độ | Cường độ |
|---|---|---|
| 24 | p | — |
| 24 | B+ | — |
| 24 | B+p | — |
| 25 | p | — |
| 26 | B+ | 100% |
| 26 | B+p | 35,1% |
| 26 | 2p | 2% |
| 27 | B+ | 100% |
| 27 | B+p | 0,1% |
| 28 | B+ | 100% |
Hệ số tán xạ tia X (504)
| Năng lượng (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 8,47738 |
| 10,1617 | — | 8,27092 |
| 10,3261 | — | 8,06949 |
| 10,4931 | — | 7,87297 |
| 10,6628 | — | 7,68123 |
| 10,8353 | — | 7,49416 |
| 11,0106 | — | 7,31165 |
| 11,1886 | — | 7,13359 |
| 11,3696 | — | 6,95985 |
| 11,5535 | — | 6,79035 |
Dữ liệu bổ sung
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
1.05×103 milligrams per kilogram
Tài liệu tham khảo (1)
- [5] Phosphorus https://education.jlab.org/itselemental/ele015.html
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
6×10-2 milligrams per liter
Tài liệu tham khảo (1)
- [5] Phosphorus https://education.jlab.org/itselemental/ele015.html
Sources
Sources of this element.
Never found free in nature, it is widely distributed in combination with minerals. Phosphate rock, which contains the mineral apatite, an impure tri-calcium phosphate, is an important source of the element. Large deposits are found in Russia, in Morocco, and in Florida, Tennessee, Utah, Idaho, and elsewhere.
Tài liệu tham khảo (1)
- [6] Phosphorus https://periodic.lanl.gov/15.shtml
Production
Production of this element (from raw materials or other compounds containing the element).
White phosphorus may be made by several methods. By one process, tri-calcium phosphate, the essential ingredient of phosphate rock, is heated in the presence of carbon and silica in an electric furnace or fuel-fired furnace. Elementary phosphorus is liberated as vapor and may be collected under phosphoric acid, an important compound in making super-phosphate fertilizers.
Tài liệu tham khảo (1)
- [6] Phosphorus https://periodic.lanl.gov/15.shtml
Tài liệu tham khảo
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Phosphorus.
The element property data was retrieved from publications.