Tellurium (Te)
metalloidSolid
ਮਿਆਰੀ ਪਰਮਾਣੂ ਭਾਰ
127.6 uਇਲੈਕਟ੍ਰਾਨ ਵਿਨਿਆਸ
[Kr] 5s2 4d10 5p4ਪਿਘਲਣ ਦਰਜਾ
449.51 °Cਉਬਾਲ ਦਰਜਾ
987.85 °Cਘਣਤਾ
6232 kg/m³ਆਕਸੀਕਰਨ ਅਵਸਥਾਵਾਂ
−2, −1, 0, +1, +2, +3, +4, +5, +6ਬਿਜਲਈ ਰਿਣਾਤਮਕਤਾ (ਪਾਲਿੰਗ)
2.1ਆਇਨੀਕਰਨ ਊਰਜਾ (ਪਹਿਲੀ)
9.009808 eVਖੋਜ ਦਾ ਸਾਲ
1782ਪਰਮਾਣੂ ਅਰਧ-ਵਿਆਸ
140 pmਵੇਰਵੇ
Tellurium is a brittle metalloid in group 16, below selenium and above polonium. It is chemically related to sulfur and selenium but is more metallic, less abundant, and more easily reduced. In nature it occurs mainly as telluride minerals and as a minor constituent of copper ores. Its technological importance comes from semiconducting and thermoelectric compounds, cadmium telluride photovoltaics, and small alloying additions that modify machinability and corrosion behavior.
Crystalline tellurium has a silvery-white appearance, and when pure it exhibits a metallic luster. It is brittle and easily pulverized. Amorphous tellurium is found by precipitating tellurium from a solution of telluric or tellurous acid. Whether this form is truly amorphous, or made of minute crystals, is open to question. Tellurium is a p-type semiconductor, and shows greater conductivity in certain directions, depending on alignment of the atoms.
Its conductivity increases slightly with exposure to light. It can be doped with silver, copper, gold, tin, or other elements. In air, tellurium burns with a greenish-blue flames, forming the dioxide. Molten tellurium corrodes iron, copper, and stainless steel.
The name derives from the Latin Tellus, who was the Roman goddess of the Earth. Tellurium was discovered by Franz Joseph Müller von Reichenstein in 1782 and overlooked for 15 years until it was isolated by the German chemist Martin-Heinrich Klaproth in 1798. The Hungarian chemist Paul Kitaibel independently discovered tellurium in 1789, prior to Klaproth's work but after von Reichenstein.
Tellurium was discovered by Franz Joseph Müller von Reichenstein, a Romanian mining official, in 1782. Reichenstein was the chief inspector of all mines, smelters and saltworks in Transylvania. He also had an interest in chemistry and extracted a new metal from an ore of gold, known as aurum album, which he believed was antimony. He shortly realized that the metal he had produced wasn't antimony at all, but a previously unknown element. Reichenstein's work was forgotten until 1798 when Martin Heinrich Klaproth, a German chemist, mentioned the substance in a paper. Klaproth named the new element tellurium but gave full credit for its discovery to Reichenstein. Tellurium is found free in nature, but is most often found in the ores sylvanite (AgAuTe4), calaverite (AuTe2) and krennerite (AuTe2). Today, most tellurium is obtained as a byproduct of mining and refining copper.
From the Latin word tellus, earth. Discovered by Muller von Reichenstein in 1782; named by Klaproth, who isolated it in 1798.
Pure tellurium is a silvery-white to gray, lustrous, crystalline solid at ordinary conditions. It is brittle and can be powdered, but it is not malleable. The common trigonal form has helical chains of atoms, giving the element anisotropic electrical and thermal properties.
The largest modern use of tellurium is in cadmium telluride, CdTe, thin-film solar cells. Tellurium is also used in bismuth telluride, Bi₂Te₃, and related thermoelectric materials for cooling and power generation from temperature differences. Small additions to copper, steel, and lead improve machinability or modify mechanical properties. Tellurium compounds are used in some infrared optical materials, phase-change chalcogenide systems, and specialized vulcanization and glass applications, but these uses are smaller and material-specific.
Tellurium is a semiconductor and is frequently doped with copper, tin, gold or silver. Tellurium is also used to color glass and ceramics and is one of the primary ingredients in blasting caps.
Tellurium is primarily used as an alloying agent. Small amounts of tellurium are added to copper and stainless steel to make them easier to machine and mill. Tellurium is also added to lead to increase its strength and resistance to sulfuric acid (H2SO4).
Tellurium forms many compounds, but none that are commercially important. They include: tellourous acid (H2TeO2), tellurium tetrachloride (TeCl4), tellurium dichloride (TeCl2), tellurium trioxide (TeO3), tellurium monoxide (TeO) and sodium telluride (Na2Te).
Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. Tellurium is used as a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices.
Isotopes in Earth/Planetary Science
Tellurium isotopes are a mixture of r-process, s-process, and p-process nucleosynthesis products, making them useful for studying the contribution of stellar products to the molecular cloud from which the Sun and planets were formed (Fig. IUPAC.52.1) [378] M. Fehr. Tellurium Isotopes and their Applications in Cosmo- and Geochemistry, Swiss Federal Institute of Technology Zurich (2014), Feb. 26; http://e-collection.library.ethz.ch/eserv/eth:27380/eth-27380-01.pdf., [379] M. A. Fehr, M. Rehkämper, D. Porcelli, A. N. Halliday. Homogeneity of Tellurium Isotopes in Chondrites, Leachates of Allende and Canyon Diablo, Lunar and Planetary Science (2014), Feb. 26; http://www.lpi.usra.edu/meetings/lpsc2003/pdf/1655.pdf., [380] M. A. Fehr, M. Rehkämper, A. N. Halliday, U. Wiechert, B. Hattendorf, D. Günther, S. Ono, J. L. Eigenbrode, I. D. Rumble. Geochim. Cosmochim. Acta69, 5099 (2005)..
Isotopes in Geochronology
The double beta decay of 130Te (with a half-life of 7×1020 years) has been used for the determination of gas-retention ages of tellurium minerals [382] A. P. Meshik, C. M. Hohenberg, O. V. Pravdivtseva, T. J. Bernatowicz, Y. S. Kapustab. Nucl. Phys. A809, 275 (2008)..
Isotopes Used as a Source of Radioactive Isotope(s)
120Te is used for the production of 120gI, where “g” indicates ground state, via the 120Te (p, n) 120gI reaction, which is used as a positron emission tomography (PET) and beta-emitting isotope [383] A. Hohn, H. H. Coenen, S. M. Qaim. Appl. Radiat. Isot.49, 1493 (1998)., [384] H. Herzog, S. M. Qaim, L. Tellmann, S. Spellerberg, D. Kruecker, H. H. Coenen. Eur. J. Nucl. Med. Mol. Imaging33, 1249 (2006).. 120gI has a half-life of 1.36 h. 122Te is used in the production of the radioisotope 122I (with a half-life of 3.6 min) via the reaction 122Te (p, n) 122I, which is used in gamma imaging [385] A. Hohn, B. Scholten, H. H. Coenen, S. M. Qaim, Appl. Radiat. Isot.49, 93 (1998).. 123Te is used for the production of radioactive 123I (with a half-life of 13.2 h) via the 123Te (p, n) 123I reaction, which is used in thyroid imaging [386] T. Kakavand, M. Sadeghi, K. K. Moghaddam, S. S. Bonab, B. Fateh. Iran. J. Radiat. Res.5, 207 (2008). and for in vivo medical studies using single-photon emission computed tomography (SPECT) [386] T. Kakavand, M. Sadeghi, K. K. Moghaddam, S. S. Bonab, B. Fateh. Iran. J. Radiat. Res.5, 207 (2008).. 124Te is used for the production of both 123I and the PET isotope 124I via the 124Te (p, 2n) 123I and 124Te (p, n) 124I reactions, respectively [386] T. Kakavand, M. Sadeghi, K. K. Moghaddam, S. S. Bonab, B. Fateh. Iran. J. Radiat. Res.5, 207 (2008)., [387] M. L. Firouzbakht, D. J. Schlyer, R. D. Finn, G. Laguzzi, A. P. Wolf. Nucl. Instr. Methods Phys. Res. B79, 909 (1993)., [388] H. Herzog, L. Tellman, S. M. Qaim, S. Spellerberg, A. Schmid, H. H. Coenen. Appl. Radiat. Isot.56, 673 (2002)., [389] F. T. Lee, C. Hall, A. Rigopoulos, J. Zweit, K. Pathmaraj, G. J. O’Keefe, F. E. Smyth, S. Welt, L. J. Old, A. M. Scott. J. Nucl. Med.42, 764 (2001).. The half-life of 124I is 100 h.
Tellurium commonly shows oxidation states −2, +4, and +6, with +4 especially important in oxides and oxoanion chemistry. Hydrogen telluride, H₂Te, is an unstable and highly toxic hydride. Tellurium dioxide, TeO₂, is an amphoteric oxide used in tellurite glasses and as a chemical intermediate. Telluric acid, H₆TeO₆, contains tellurium in the +6 state. Metal tellurides include cadmium telluride, CdTe, and bismuth telluride, Bi₂Te₃, whose bonding and band structures are central to their electronic uses.
See more information at the Tellurium compound page.
Elemental tellurium has moderate acute toxicity, but dusts and fumes should be controlled because inhalation and ingestion can be harmful. Exposure to tellurium or some tellurium compounds can produce a persistent garlic-like odor in breath and sweat from volatile metabolites. Hydrogen telluride, H₂Te, is particularly hazardous. Cadmium telluride, CdTe, also requires controls because cadmium compounds are toxic, especially if dust is generated during manufacture or disposal.
Tellurium and its compounds are probably toxic and should be handled with care. Workmen exposed to as little as 0.01 mg/m3 of air, or less, develop "tellurium breath," which has a garlic-like odor.
Tellurium is a rare trace element in the crust and is strongly chalcophile, concentrating with sulfide and telluride mineral assemblages rather than forming abundant independent deposits. Weathering can release tellurium into soils and waters, where its speciation depends on redox conditions and pH. Tellurite and tellurate species can be mobile under some conditions, while reduction and adsorption tend to immobilize it. It has no known essential biological role for humans.
Tellurium is not usually mined as a primary product. Most commercial supply is recovered as a by-product from copper refining, especially from anode slimes produced during electrolytic purification. This dependence makes supply sensitive to copper ore composition, refinery practice, and the economics of by-product recovery rather than to tellurium demand alone. Demand is led by cadmium telluride photovoltaics and thermoelectric materials, with smaller metallurgical and chemical uses. Recycling is technically possible from manufacturing scrap and some end-of-life devices, but collection and separation can limit recovery.
Tellurium is occasionally found native, but is more often found as the telluride of gold (calaverite), and combined with other metals. It is recovered commercially from anode muds produced during the electrolytic refining of blister copper. The U.S., Canada, Peru, and Japan are the largest Free World producers of the element.
Tellurium is far less abundant in the universe than lighter chalcogens such as sulfur and selenium. Its stable isotopes are produced mainly by neutron-capture processes in earlier generations of stars, including slow and rapid neutron-capture pathways. In planetary materials it behaves as a chalcophile element and is associated with sulfide-rich phases rather than silicate minerals.
- Tellurium was named from tellus, the Latin word for Earth.
- It is one of the few elements whose name refers to Earth rather than a celestial object or place of discovery.
- Natural tellurium contains several stable isotopes and very long-lived radioactive isotopes.
- The element can impart a garlic-like odor to breath at exposures far below severe poisoning levels.
- Tellurium improves the machinability of copper without requiring large alloy additions.
- Many useful tellurium materials are semiconductors rather than metallic conductors.
ਚਿੱਤਰ
ਗੁਣ
ਭੌਤਿਕ
- ਪਰਮਾਣੂ ਅਰਧ-ਵਿਆਸ (ਅਨੁਭਵ-ਆਧਾਰਿਤ)
- 140 pm ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਪਰਮਾਣੂ ਅਰਧ-ਵਿਆਸ (ਅਨੁਭਵ-ਆਧਾਰਿਤ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ
- 138 pm ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਵਾਨ ਡਰ ਵਾਲਜ਼ ਅਰਧ-ਵਿਆਸ
- 206 pm ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਵਾਨ ਡਰ ਵਾਲਜ਼ ਅਰਧ-ਵਿਆਸ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਧਾਤਵੀ ਅਰਧ-ਵਿਆਸ
- 137 pm ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਧਾਤਵੀ ਅਰਧ-ਵਿਆਸ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਘਣਤਾ
- 6232 kg/m³ ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਘਣਤਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਮੋਲਰ ਆਇਤਨ
- 0.0205 L/mol
- STP 'ਤੇ ਅਵਸਥਾ
- ਠੋਸ ਸਾਰੇ ਤੱਤਾਂ ਦੀ STP 'ਤੇ ਅਵਸਥਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਪਿਘਲਣ ਦਰਜਾ
- 449.51 °C ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਪਿਘਲਣ ਦਰਜਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਉਬਾਲ ਦਰਜਾ
- 987.85 °C ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਉਬਾਲ ਦਰਜਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਤਾਪ ਚਾਲਕਤਾ
- 14.3 W/(m·K) ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਤਾਪ ਚਾਲਕਤਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਵਿਸ਼ੇਸ਼ ਤਾਪ ਸਮਰੱਥਾ
- 0.202 J/(g·K) ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਵਿਸ਼ੇਸ਼ ਤਾਪ ਸਮਰੱਥਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਮੋਲਰ ਤਾਪ ਸਮਰੱਥਾ
- 25.73 J/(mol·K) ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਮੋਲਰ ਤਾਪ ਸਮਰੱਥਾ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਕ੍ਰਿਸਟਲ ਬਣਤਰ
- ਛੇਭੁਜੀ ਸੰਘਣੀ ਪੈਕਿੰਗ ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਕ੍ਰਿਸਟਲ ਬਣਤਰ ਦੀ ਤੁਲਨਾ ਕਰੋ →
ਰਸਾਇਣਕ
- ਬਿਜਲਈ ਰਿਣਾਤਮਕਤਾ (ਪਾਲਿੰਗ)
- 2.1 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਬਿਜਲਈ ਰਿਣਾਤਮਕਤਾ (ਪਾਲਿੰਗ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਬਿਜਲਈ ਰਿਣਾਤਮਕਤਾ (ਐਲਨ)
- 2.158
- ਇਲੈਕਟ੍ਰਾਨ ਬੰਧੁਤਾ
- 1.9708 eV
- ਆਇਨੀਕਰਨ ਊਰਜਾ (ਪਹਿਲੀ)
- 9.009808 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਆਇਨੀਕਰਨ ਊਰਜਾ (ਪਹਿਲੀ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਆਇਨੀਕਰਨ ਊਰਜਾ (ਦੂਜੀ)
- 18.600064 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਆਇਨੀਕਰਨ ਊਰਜਾ (ਦੂਜੀ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਆਇਨੀਕਰਨ ਊਰਜਾ (ਤੀਜੀ)
- 27.840096 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਆਇਨੀਕਰਨ ਊਰਜਾ (ਤੀਜੀ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਆਇਨੀਕਰਨ ਊਰਜਾ (ਚੌਥੀ)
- 37.415629 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਆਇਨੀਕਰਨ ਊਰਜਾ (ਚੌਥੀ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਆਇਨੀਕਰਨ ਊਰਜਾ (ਪੰਜਵੀਂ)
- 59.300204 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਆਇਨੀਕਰਨ ਊਰਜਾ (ਪੰਜਵੀਂ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਆਕਸੀਕਰਨ ਅਵਸਥਾਵਾਂ
- −2, −1, 0, +1, +2, +3, +4, +5, +6 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਆਕਸੀਕਰਨ ਅਵਸਥਾਵਾਂ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਸੰਯੋਜਕ ਇਲੈਕਟ੍ਰਾਨ
- 6 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਸੰਯੋਜਕ ਇਲੈਕਟ੍ਰਾਨ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਇਲੈਕਟ੍ਰਾਨ ਵਿਨਿਆਸ
- [Kr] 5s2 4d10 5p4
ਤਾਪਗਤੀਕੀ
- ਕ੍ਰਾਂਤਿਕ ਬਿੰਦੂ (ਤਾਪਮਾਨ)
- 2056 °C
- ਪਿਘਲਣ ਦਾ ਤਾਪ
- 0.1812717 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਪਿਘਲਣ ਦਾ ਤਾਪ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਵਾਸ਼ਪੀਕਰਨ ਦਾ ਤਾਪ
- 0.54412603 eV ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਵਾਸ਼ਪੀਕਰਨ ਦਾ ਤਾਪ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਉਰਧਪਾਤਨ ਦਾ ਤਾਪ
- 2.041768 eV
- ਪਰਮਾਣੂਕਰਨ ਦਾ ਤਾਪ
- 2.041768 eV
- ਪਰਮਾਣੂਕਰਨ ਐਂਥੈਲਪੀ
- 2.037622 eV
ਨਾਭਿਕੀ
- ਪ੍ਰੋਟਾਨ
- 52 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਪ੍ਰੋਟਾਨ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਨਿਊਟ੍ਰਾਨ
- 74 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਨਿਊਟ੍ਰਾਨ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਜਾਣੇ-ਪਛਾਣੇ ਸਮਸਥਾਨਿਕ
- 42 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਜਾਣੇ-ਪਛਾਣੇ ਸਮਸਥਾਨਿਕ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਸਥਿਰ ਸਮਸਥਾਨਿਕ
- 4 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਸਥਿਰ ਸਮਸਥਾਨਿਕ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਸਭ ਤੋਂ ਸਥਿਰ ਸਮਸਥਾਨਿਕ
- Te-126
- ਖੋਜ ਦਾ ਸਾਲ
- 1782
ਪ੍ਰਚੁਰਤਾ
- ਪ੍ਰਚੁਰਤਾ (ਧਰਤੀ ਦੀ ਛਾਲ)
- 0.001 mg/kg ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਪ੍ਰਚੁਰਤਾ (ਧਰਤੀ ਦੀ ਛਾਲ) ਦੀ ਤੁਲਨਾ ਕਰੋ →
ਕ੍ਰਿਸਟਲ ਬਣਤਰ
- ਜਾਲਕ ਸਥਿਰਾਂਕ a
- 445 pm
ਇਲੈਕਟ੍ਰਾਨਿਕ ਬਣਤਰ
- ਪ੍ਰਤੀ ਖੋਲ ਇਲੈਕਟ੍ਰਾਨ
- 2, 8, 18, 18, 6 ਸਾਰੇ ਤੱਤਾਂ ਦੀ ਪ੍ਰਤੀ ਖੋਲ ਇਲੈਕਟ੍ਰਾਨ ਦੀ ਤੁਲਨਾ ਕਰੋ →
ਪਛਾਣਕਰਤਾ
- CAS ਸੰਖਿਆ
- 13494-80-9 ਸਾਰੇ ਤੱਤਾਂ ਦੀ CAS ਸੰਖਿਆ ਦੀ ਤੁਲਨਾ ਕਰੋ →
- ਟਰਮ ਪ੍ਰਤੀਕ
- 3P2
- InChI
- InChI=1S/Te
- InChI ਕੁੰਜੀ
- PORWMNRCUJJQNO-UHFFFAOYSA-N
ਇਲੈਕਟ੍ਰਾਨ ਵਿਨਿਆਸ ਮਾਪਿਆ
Te: 4d¹⁰ 5s² 5p⁴[Kr] 4d¹⁰ 5s² 5p⁴1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁴ਪਰਮਾਣੂ ਮਾਡਲ
ਸਮਸਥਾਨਿਕ ਨਿਊਟ੍ਰਾਨਾਂ ਦੀ ਗਿਣਤੀ, ਪੁੰਜ ਅਤੇ ਸਥਿਰਤਾ ਬਦਲਦੇ ਹਨ — ਉਦਾਸੀਨ ਪਰਮਾਣੂ ਦਾ ਇਲੈਕਟ੍ਰਾਨ ਵਿਨਿਆਸ ਨਹੀਂ।
ਸੰਕੇਤਕ ਪਰਮਾਣੂ ਮਾਡਲ, ਪੈਮਾਨੇ ਅਨੁਸਾਰ ਨਹੀਂ।
ਪਰਮਾਣੂ ਪਛਾਣ-ਚਿੰਨ੍ਹ
ਨਿਕਾਸ / ਅਵਸ਼ੋਸ਼ਣ ਸਪੈਕਟ੍ਰਮ
ਸਮਸਥਾਨਿਕ ਵੰਡ
| ਪੁੰਜ ਸੰਖਿਆ | ਪਰਮਾਣੂ ਪੁੰਜ (u) | ਕੁਦਰਤੀ ਪ੍ਰਚੁਰਤਾ | ਅਰਧ-ਆਯੂ |
|---|---|---|---|
| 122 ਸਥਿਰ | 121.9030435 ± 0.0000016 | 2.5500% | ਸਥਿਰ |
| 124 ਸਥਿਰ | 123.9028171 ± 0.0000016 | 4.7400% | ਸਥਿਰ |
| 125 ਸਥਿਰ | 124.9044299 ± 0.0000016 | 7.0700% | ਸਥਿਰ |
| 126 ਸਥਿਰ | 125.9033109 ± 0.0000016 | 18.8400% | ਸਥਿਰ |
ਫੇਜ਼ / ਅਵਸਥਾ
ਕਾਰਨ: ਪਿਘਲਣ ਦਰਜੇ (449.51 °C) ਤੋਂ 424.5 °C ਘੱਟ
ਸੰਕੇਤਕ, ਪੈਮਾਨੇ ਅਨੁਸਾਰ ਨਹੀਂ
ਅਵਸਥਾ ਪਰਿਵਰਤਨ ਬਿੰਦੂ
ਸੰਕ੍ਰਮਣ ਊਰਜਾਵਾਂ
ਪਿਘਲਣ ਦਰਜੇ 'ਤੇ 1 mol ਨੂੰ ਪਿਘਲਾਉਣ ਲਈ ਲੋੜੀਂਦੀ ਊਰਜਾ
ਉਬਾਲ ਦਰਜੇ 'ਤੇ 1 mol ਦੇ ਵਾਸ਼ਪੀਕਰਨ ਲਈ ਲੋੜੀਂਦੀ ਊਰਜਾ
ਉਰਧਪਾਤਨ ਦਰਜੇ 'ਤੇ 1 mol ਦੇ ਉਰਧਪਾਤਨ ਲਈ ਲੋੜੀਂਦੀ ਊਰਜਾ
ਘਣਤਾ
ਮਿਆਰੀ ਹਾਲਤਾਂ 'ਤੇ
ਮਿਆਰੀ ਹਾਲਤਾਂ 'ਤੇ
ਉੱਨਤ
ਪਰਮਾਣੂ ਸਪੈਕਟ੍ਰਮ
52 ਵਿੱਚੋਂ 10 ਦਿਖਾਏ ਜਾ ਰਹੇ ਹਨ। ਆਇਨ ਦੇ ਆਵੇਸ਼ ਅਨੁਸਾਰ ਕ੍ਰਮਬੱਧ (ਵਧਦੇ ਕ੍ਰਮ ਵਿੱਚ)।
ਉਪਲਬਧ ਸਪੈਕਟ੍ਰਮੀ ਰੇਖਾਵਾਂ ?
| ਆਇਨ | ਆਵੇਸ਼ | ਕੁੱਲ ਰੇਖਾਵਾਂ | ਸੰਕ੍ਰਮਣ ਸੰਭਾਵਨਾਵਾਂ | ਪੱਧਰਾਂ ਦੇ ਨਾਮਾਂਕਨ |
|---|---|---|---|---|
| Te I | 0 | 133 | 6 | 112 |
| Te II | +1 | 345 | 0 | 310 |
ਉਪਲਬਧ ਊਰਜਾ ਪੱਧਰ ?
| ਆਇਨ | ਆਵੇਸ਼ | ਪੱਧਰ |
|---|---|---|
| Te I | 0 | 120 |
| Te II | +1 | 129 |
| Te III | +2 | 55 |
| Te IV | +3 | 16 |
| Te V | +4 | 45 |
| Te VI | +5 | 9 |
| Te VII | +6 | 60 |
| Te VIII | +7 | 2 |
| Te IX | +8 | 2 |
| Te X | +9 | 2 |
ਆਇਨਿਕ ਅਰਧ-ਵਿਆਸ
| ਆਵੇਸ਼ | ਉਪਸਹਿ-ਸੰਯੋਜਨ | ਸਪਿਨ | ਅਰਧ-ਵਿਆਸ |
|---|---|---|---|
| -2 | 6 | ਉਪਲਬਧ ਨਹੀਂ | 221 pm |
| +4 | 3 | ਉਪਲਬਧ ਨਹੀਂ | 52 pm |
| +4 | 4 | ਉਪਲਬਧ ਨਹੀਂ | 66 pm |
| +4 | 6 | ਉਪਲਬਧ ਨਹੀਂ | 97 pm |
| +6 | 4 | ਉਪਲਬਧ ਨਹੀਂ | 43 pm |
| +6 | 6 | ਉਪਲਬਧ ਨਹੀਂ | 56.00000000000001 pm |
ਯੋਗਿਕ
ਸਮਸਥਾਨਿਕ (4)
Thirty isotopes of tellurium are known, with atomic masses ranging from 108 to 137. Natural tellurium consists of eight isotopes.
| ਪੁੰਜ ਸੰਖਿਆ | ਪਰਮਾਣੂ ਪੁੰਜ (u) | ਕੁਦਰਤੀ ਪ੍ਰਚੁਰਤਾ | ਅਰਧ-ਆਯੂ | ਖ਼ੈ ਦੀ ਵਿਧੀ | |
|---|---|---|---|---|---|
| 122 ਸਥਿਰ | 121.9030435 ± 0.0000016 | 2.5500% ± 0.1200% | ਸਥਿਰ | stable | |
| 124 ਸਥਿਰ | 123.9028171 ± 0.0000016 | 4.7400% ± 0.1400% | ਸਥਿਰ | stable | |
| 125 ਸਥਿਰ | 124.9044299 ± 0.0000016 | 7.0700% ± 0.1500% | ਸਥਿਰ | stable | |
| 126 ਸਥਿਰ | 125.9033109 ± 0.0000016 | 18.8400% ± 0.2500% | ਸਥਿਰ | stable |
ਸਪੈਕਟ੍ਰਮੀ ਰੇਖਾਵਾਂ
74 ਵਿੱਚੋਂ 50 ਦਿਖਾਏ ਜਾ ਰਹੇ ਹਨ। ਮੂਲ ਰੂਪ ਵਿੱਚ ਸਿਰਫ਼ ਮਾਪੀ ਹੋਈ ਤੀਬਰਤਾ ਵਾਲੀਆਂ ਸਪੈਕਟ੍ਰਮੀ ਰੇਖਾਵਾਂ ਦਿਖਾਈਆਂ ਜਾਂਦੀਆਂ ਹਨ।
| ਤਰੰਗ-ਲੰਬਾਈ (nm) | ਤੀਬਰਤਾ | ਆਇਨੀਕਰਨ ਪੜਾਅ | ਕਿਸਮ | ਸੰਕ੍ਰਮਣ | ਸ਼ੁੱਧਤਾ | ਸਰੋਤ | |
|---|---|---|---|---|---|---|---|
| 486.623 nm | 2300 | Te II | emission | 5s2.5p2.(3P).6p 4D* → 5s2.5p2.(3P).6d 4F | ਮਾਪਿਆ | NIST | |
| 557.636 nm | 2100 | Te II | emission | 5s2.5p2.(1D).6s 2D → 5s2.5p2.(1D).6p 2F* | ਮਾਪਿਆ | NIST | |
| 570.812 nm | 1900 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 4D* | ਮਾਪਿਆ | NIST | |
| 483.13 nm | 1600 | Te II | emission | 5s2.5p2.(3P).6p 4D* → 5s2.5p2.(3P).6d 4P | ਮਾਪਿਆ | NIST | |
| 564.926 nm | 1500 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 4D* | ਮਾਪਿਆ | NIST | |
| 575.586 nm | 1500 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 4D* | ਮਾਪਿਆ | NIST | |
| 544.984 nm | 1400 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 4P* | ਮਾਪਿਆ | NIST | |
| 468.691 nm | 1310 | Te II | emission | 5s2.5p2.(3P).6p 4P* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 476.605 nm | 1300 | Te II | emission | 5s2.5p2.(3P).6p 2D* → 5s2.5p2.(3P).6d 2F | ਮਾਪਿਆ | NIST | |
| 490.442 nm | 1300 | Te II | emission | 5s2.5p2.(3P).6p 2D* → 5s2.5p2.(3P).6d 2F | ਮਾਪਿਆ | NIST | |
| 566.622 nm | 1200 | Te II | emission | 5s2.5p2.(3P).6s 2P → 5s2.5p2.(3P).6p 2D* | ਮਾਪਿਆ | NIST | |
| 597.468 nm | 1200 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 4P* | ਮਾਪਿਆ | NIST | |
| 548.795 nm | 1100 | Te II | emission | 5s2.5p2.(3P).5d 2P → 5s2.5p2.(3P).6p 4D* | ਮਾਪਿਆ | NIST | |
| 484.29 nm | 1000 | Te II | emission | 5s2.5p2.(3P).5d 2D → 5s2.5p2.(3P).4f 4D* | ਮਾਪਿਆ | NIST | |
| 486.513 nm | 1000 | Te II | emission | 5s2.5p2.(3P).6p 4D* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 482.712 nm | 900 | Te II | emission | 5s2.5p2.(3P).6p 4P* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 447.865 nm | 830 | Te II | emission | 5s2.5p2.(3P).6p 4P* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 500.081 nm | 810 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 2D* | ਮਾਪਿਆ | NIST | |
| 477.155 nm | 800 | Te II | emission | 5s2.5p2.(3P).6p 4D* → 5s2.5p2.(3P).6d 4F | ਮਾਪਿਆ | NIST | |
| 593.615 nm | 730 | Te II | emission | 5s2.5p2.(3P).6s 4P → 5s2.5p2.(3P).6p 4S* | ਮਾਪਿਆ | NIST | |
| 464.111 nm | 680 | Te II | emission | 5s2.5p2.(3P).6p 4D* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 470.654 nm | 670 | Te II | emission | 5s2.5p2.(1D).6s 2D → 5s2.5p2.(1D).6p 2P* | ਮਾਪਿਆ | NIST | |
| 436.402 nm | 650 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 4D* | ਮਾਪਿਆ | NIST | |
| 636.713 nm | 570 | Te II | emission | 5s.(2S).5p4.(1D) 2D → 5s2.5p2.(3P).6p 4D* | ਮਾਪਿਆ | NIST | |
| 469.638 nm | 560 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 2D* | ਮਾਪਿਆ | NIST | |
| 416.977 nm | 540 | Te II | emission | 5s2.5p2.(3P).5d 2D → 5s2.5p2.(3P).4f 2F* | ਮਾਪਿਆ | NIST | |
| 463.062 nm | 540 | Te II | emission | 5s2.5p2.(3P).6p 4S* → 5s2.5p2.(3P).7s 2P | ਮਾਪਿਆ | NIST | |
| 478.488 nm | 510 | Te II | emission | 5s2.5p2.(1D).6s 2D → 5s2.5p2.(1D).6p 2P* | ਮਾਪਿਆ | NIST | |
| 455.778 nm | 480 | Te II | emission | 5s2.5p2.(3P).6p 4S* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 683.7663 nm | 430 | Te I | emission | 5p3.(4S*).6p 5P → 5p3.(4S*).8d 5D* | ਮਾਪਿਆ | NIST | |
| 404.716 nm | 400 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 2D* | ਮਾਪਿਆ | NIST | |
| 428.583 nm | 370 | Te II | emission | 5s2.5p2.(3P).6p 2S* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 394.798 nm | 340 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 4F* | ਮਾਪਿਆ | NIST | |
| 422.572 nm | 340 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 4D* | ਮਾਪਿਆ | NIST | |
| 396.921 nm | 320 | Te II | emission | 5s.(2S).5p4.(1D) 2D → 5s2.5p2.(1D).6p 2D* | ਮਾਪਿਆ | NIST | |
| 410.105 nm | 320 | Te II | emission | 5s2.5p2.(1D).5d 2S → 5s2.5p2.(3P).4f 2D* | ਮਾਪਿਆ | NIST | |
| 412.732 nm | 320 | Te II | emission | 5s2.5p2.(1D).5d 2S → 5s2.5p2.(3P).4f 4D* | ਮਾਪਿਆ | NIST | |
| 496.187 nm | 320 | Te II | emission | 5s2.5p2.(3P).6p 4P* → 5s2.5p2.(3P).6d 4D | ਮਾਪਿਆ | NIST | |
| 400.653 nm | 310 | Te II | emission | 5s.(2S).5p4.(3P) 4P → 5s2.5p2.(3P).6p 4D* | ਮਾਪਿਆ | NIST | |
| 438.51 nm | 310 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 2D* | ਮਾਪਿਆ | NIST | |
| 417.929 nm | 300 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(1S).6p 2P* | ਮਾਪਿਆ | NIST | |
| 427.343 nm | 300 | Te II | emission | 5s2.5p2.(3P).6p 2S* → 5s2.5p2.(3P).7s 2P | ਮਾਪਿਆ | NIST | |
| 679.109 nm | 300 | Te I | emission | 5p3.(4S*).6p 5P → 5p3.(4S*).8d 3D* | ਮਾਪਿਆ | NIST | |
| 669.0154 nm | 290 | Te I | emission | 5p3.(4S*).6p 5P → 5p3.(4S*).8d 5D* | ਮਾਪਿਆ | NIST | |
| 453.708 nm | 260 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 4F* | ਮਾਪਿਆ | NIST | |
| 397.592 nm | 250 | Te II | emission | 5s.(2S).5p4.(1D) 2D → 5s2.5p2.(1D).6p 2F* | ਮਾਪਿਆ | NIST | |
| 416.356 nm | 250 | Te II | emission | 5s2.5p2.(3P).5d 4P → 5s2.5p2.(3P).4f 4D* | ਮਾਪਿਆ | NIST | |
| 398.176 nm | 240 | Te II | emission | 5s2.5p2.(3P).6s 2P → 5s2.5p2.(1D).6p 2P* | ਮਾਪਿਆ | NIST | |
| 425.114 nm | 240 | Te II | emission | 5s2.5p2.(3P).5d 2D → 5s2.5p2.(3P).4f 2F* | ਮਾਪਿਆ | NIST | |
| 404.888 nm | 230 | Te II | emission | 5s.(2S).5p4.(3P) 4P → 5s2.5p2.(3P).6p 4S* | ਮਾਪਿਆ | NIST |
ਵਿਸਤ੍ਰਿਤ ਗੁਣ
ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ (ਵਿਸਤ੍ਰਿਤ)
- ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ (ਪਿਊਕੋ)
- 136 pm
- ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ (ਪਿਊਕੋ, ਦੋਹਰਾ ਬੰਧਨ)
- 128 pm
- ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ (ਪਿਊਕੋ, ਤਿਹਰਾ ਬੰਧਨ)
- 121 pm
- ਸਹਿ-ਸੰਯੋਜਕ ਅਰਧ-ਵਿਆਸ (ਬ੍ਰੈਗ)
- 133 pm
ਵਾਨ ਡਰ ਵਾਲਜ਼ ਅਰਧ-ਵਿਆਸ
- Bondi
- 206 pm
- Batsanov
- 210 pm
- Alvarez
- 199 pm
- UFF
- 447 pm
- MM3
- 244 pm
- Dreiding
- 423 pm
ਪਰਮਾਣੂ ਅਤੇ ਧਾਤਵੀ ਅਰਧ-ਵਿਆਸ
- ਪਰਮਾਣੂ ਅਰਧ-ਵਿਆਸ (ਰਾਮ)
- 242 pm
- ਧਾਤਵੀ ਅਰਧ-ਵਿਆਸ (C12)
- 160 pm
ਅੰਕਨ ਪੈਮਾਨੇ
- Mendeleev
- 102
- Pettifor
- 92
- Glawe
- 94
ਬਿਜਲਈ ਰਿਣਾਤਮਕਤਾ ਦੇ ਪੈਮਾਨੇ
- Ghosh
- 0
- Gunnarsson–Lundqvist
- 6
- Robles–Bartolotti
- 4
ਧਰੁਵੀਕਰਨਯੋਗਤਾ ਅਤੇ ਪ੍ਰਕੀਰਣ
- ਦੋਧਰੁਵੀ ਧਰੁਵੀਕਰਨਯੋਗਤਾ
- 38 a.u.
- ਦੋਧਰੁਵੀ ਧਰੁਵੀਕਰਨਯੋਗਤਾ (ਅਨਿਸ਼ਚਿਤਤਾ)
- 4 a.u.
- C₆
- 445 Ha·Bohr6
- C₆ (Gould–Bučko)
- 471 Ha·Bohr6
ਅਵਸਥਾ ਪਰਿਵਰਤਨ ਅਤੇ ਅਪਰਰੂਪ
| ਪਿਘਲਣ ਦਰਜਾ | 722.66 K |
| ਉਬਾਲ ਦਰਜਾ | 1261.15 K |
| ਕ੍ਰਾਂਤਿਕ ਬਿੰਦੂ (ਤਾਪਮਾਨ) | 2329.15 K |
ਆਕਸੀਕਰਨ ਅਵਸਥਾ ਦੀਆਂ ਸ਼੍ਰੇਣੀਆਂ
ਉੱਨਤ ਸੰਦਰਭ ਡਾਟਾ
ਪਰਿਰੱਖਣ ਸਥਿਰਾਂਕ (11)
| n | ਔਰਬਿਟਲ | σ |
|---|---|---|
| 1 | s | 1.0432 |
| 2 | p | 4.14 |
| 2 | s | 13.6688 |
| 3 | d | 14.1607 |
| 3 | p | 17.9911 |
| 3 | s | 18.0019 |
| 4 | d | 32.04 |
| 4 | p | 28.878 |
| 4 | s | 27.5916 |
| 5 | p | 41.1915 |
ਕ੍ਰਿਸਟਲ ਅਰਧ-ਵਿਆਸਾਂ ਦਾ ਵੇਰਵਾ (6)
| ਆਵੇਸ਼ | CN | ਸਪਿਨ | rcrystal (pm) | ਉਤਪੱਤੀ |
|---|---|---|---|---|
| -2 | VI | 207 | Pauling's (1960) crystal radius, | |
| 4 | III | 66 | ||
| 4 | IV | 80 | ||
| 4 | VI | 111 | ||
| 6 | IV | 57 | calculated, | |
| 6 | VI | 70 |
ਸਮਸਥਾਨਿਕ ਖ਼ੈ ਦੀਆਂ ਵਿਧੀਆਂ (67)
| ਸਮਸਥਾਨਿਕ | ਮੋਡ | ਤੀਬਰਤਾ |
|---|---|---|
| 104 | A | 100% |
| 105 | A | 100% |
| 106 | A | 100% |
| 107 | A | 70% |
| 107 | B+ | — |
| 107 | B+p | — |
| 108 | B+ | 51% |
| 108 | A | 49% |
| 108 | B+p | 2.4% |
| 108 | B+A | 0.1% |
ਐਕਸ-ਰੇ ਖਿੰਡਾਅ ਗੁਣਾਂਕ (508)
| ਊਰਜਾ (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 9.70237 |
| 10.1617 | — | 9.72653 |
| 10.3261 | — | 9.75076 |
| 10.4931 | — | 9.77506 |
| 10.6628 | — | 9.7994 |
| 10.8353 | — | 9.77638 |
| 11.0106 | — | 9.72308 |
| 11.1886 | — | 9.67008 |
| 11.3696 | — | 9.61736 |
| 11.5535 | — | 9.54395 |
ਵਾਧੂ ਡਾਟਾ
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
1×10-3 milligrams per kilogram
ਸੰਦਰਭ (1)
- [5] Tellurium https://education.jlab.org/itselemental/ele052.html
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
Not Applicable
ਸੰਦਰਭ (1)
- [5] Tellurium https://education.jlab.org/itselemental/ele052.html
Sources
Sources of this element.
Tellurium is occasionally found native, but is more often found as the telluride of gold (calaverite), and combined with other metals. It is recovered commercially from anode muds produced during the electrolytic refining of blister copper. The U.S., Canada, Peru, and Japan are the largest Free World producers of the element.
ਸੰਦਰਭ (1)
- [6] Tellurium https://periodic.lanl.gov/52.shtml
ਸੰਦਰਭ
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Tellurium.
The element property data was retrieved from publications.