Cadmium (Cd)
transition-metalSolid
표준 원자량
112.414 u전자 배치
[Kr] 5s2 4d10녹는점
321.07 °C끓는점
766.85 °C밀도
8690 kg/m³산화 상태
−2, +1, +2전기 음성도(Pauling)
1.69제1 이온화 에너지
8.99382 eV발견 연도
1817원자 반지름
155 pm상세 정보
Cadmium is a soft, bluish-white post-transition metal in group 12. It occurs mainly as a minor constituent of zinc ores and is usually recovered as a by-product of zinc refining. Chemically it is dominated by the +2 oxidation state and forms many salts with ionic character. Its technological importance has declined in some applications because cadmium and many cadmium compounds are highly toxic, but it remains useful where particular electrochemical, pigment, or semiconductor properties are required.
Soft bluish metal belonging to group 12 of the periodic table. Extremely toxic even in low concentrations. Chemically similar to zinc, but lends itself to more complex compounds. Discovered in 1817 by F. Stromeyer.
The name derives from Greek kadmeia for "calamine" (zinc carbonate), with which it was found as an impurity in nature. It may have been found in furnace flue dust in Thebes, a city in the Boeottia region of central Greece. The mythological king of Phoenicia, Cadmus, founded Thebes and would be a source for the name of the ore. The element was discovered and first isolated by German physician Friedrich Stromeyer in 1817.
Cadmium was discovered by Friedrich Strohmeyer, a German chemist, in 1817 while studying samples of calamine (ZnCO3). When heated, Strohmeyer noticed that some samples of calamine glowed with a yellow color while other samples did not. After further examination, he determined that the calamine that changed color when heated contained trace amounts of a new element. There is only one mineral that contains significant amounts of cadmium, greenockite (CdS), but it is not common enough to mine profitably. Fortunately, small amounts of cadmium are found in zinc ores and most of the cadmium produced today is obtained as a byproduct of mining and refining zinc.
From the Latin word cadmia, Greek kadmeia - the ancient name for calamine, zinc carbonate. Discovered by Stromeyer in 1817 from an impurity in zinc carbonate. Cadmium most often occurs in small quantities associated with zinc ores, such as sphalerite (ZnS). Greenockite (CdS) is the only mineral of any consequence bearing cadmium. Almost all cadmium is obtained as a by-product in the treatment of zinc, copper, and lead ores. It is a soft, bluish-white metal which is easily cut with a knife. It is similar in many respects to zinc. In 1927 the International Conference on Weights and Measures redefined the meter in terms of the wavelength of the red cadmium spectral line (i.e. 1m = 1.553,164.13 wavelengths). This definition has been changed (see Krypton).
Pure cadmium is a silvery to bluish-white metal with a bright metallic luster when freshly cut. It is soft, malleable, and relatively low-melting for a structural metal. On exposure to air it slowly develops a dull surface film rather than remaining mirror-bright.
Cadmium metal has been used for corrosion-resistant electroplating on steel, especially where coatings must remain reliable in marine or aerospace service. Nickel-cadmium batteries use cadmium as the negative-electrode active material and remain important in some industrial and emergency applications, although many consumer uses have been replaced. Cadmium compounds are used in selected red, orange, and yellow pigments, in some plastics stabilizers of historical importance, and in cadmium telluride photovoltaic cells. Cadmium is also an efficient neutron absorber in control rods and shielding components.
Cadmium is a poisonous metal and its use is somewhat limited for this reason. Like zinc, cadmium can be electroplated to other materials to protect them from corrosion. Cadmium easily absorbs neutrons and is used to make control rods for nuclear reactors. Cadmium is also used in rechargeable nickel-cadmium batteries.
Cadmium is alloyed with silver to form solder, a metal with a relatively low melting point used to join electrical components, pipes and other metallic items. Cadmium based solders must be handled with care to prevent cadmium poisoning. Cadmium alloys are also used to make low friction bearings that are highly resistant to fatigue.
Hydrated cadmium sulfate (3CdSO4·5H2O), one of cadmium's compounds, is used in a device called a Weston cell, a type of battery that produces a precise voltage used to calibrate medical and laboratory equipment. Cadmium sulfide (CdS), another cadmium compound, is a yellow powder that is used as a pigment. Other cadmium compounds are used in the phosphors of black and white television sets and in the blue and green phosphors in color television sets.
Cadmium is a component of some of the lowest melting alloys; it is used in bearing alloys with low coefficients of friction and great resistance to fatigue; it is used extensively in electroplating, which accounts for about 60% of its use. It is also used in many types of solder, for standard E.M.F. cells, for Ni-Cd batteries, and as a barrier to control nuclear fission. Cadmium compounds are used in black and white television phosphors and in blue and green phosphors for color TV tubes. It forms a number of salts, of which the sulfate is most common; the sulfide is used as a yellow pigment. Cadmium and solutions of its compounds are toxic.
Isotopes in Biology
Metal accumulation is a threat to our world’s water systems and wildlife. As a way to measure the influence of heavy metals on wildlife utilizing mass spectrometric techniques, some researchers use animal food enriched in specific cadmium isotopes. These experiments work by exposing the animals to a diet enriched in 106Cd and/or other stable isotopes of metals (for example, 65Cu and/or 62Ni) for a period of time. Depending on the purpose of the experiment, the residence time of the food in the gut is determined and isotopic compositions of the gut and/or feces are measured viainductively coupled plasma mass spectrometry (ICP-MS). This information is used to measure bio-uptake (absorption and incorporation of a substance by living tissue) and accumulation rates of metals in an exposed animal [355] M. N. Croteau, S. N. Luoma, B. Pellet. Aquat. Toxicol.83, 116 (2007)., [356] M. N. Croteau, S. N. Luoma. Environ. Sci. Technol.43, 4915 (2009)..
Isotopes in Earth/Planetary Science
Molecules, atoms, and ions of the stable isotopes of cadmium possess slightly different physical and chemical properties, and they commonly will be fractionated during physical, chemical, and biological processes, giving rise to variations in isotopic abundances and in atomic weights. There are small but measureable variations in the isotopic abundances of dissolved cadmium in ocean water, which are a consequence of isotopic fractionation associated with biological uptake (Fig. IUPAC.48.1) [357] F. Lacan, R. Francois, Y. Ji, R. M. Sherrell. Geochim. Cosmochim. Acta70, 5104 (2006)., [358] W. Abouchami, S. J. G. Galer, H. J. W. d. Baar, A. C. Alderkamp, R. Middag, P. Laan, H. Feldmann, M. O. Andreae. Earth. Planet. Sci. Lett.305, 83 (2011)., [359] Z. Xue, M. Rehkämper, T. J. Horner, W. Abouchami, R. Middag, T. v. d. Flierd, H. J. W. d. Baar. Earth. Planet. Sci. Lett.382, 161 (2013)..
Isotopes Used as a Source of Radioactive Isotope(s)
112Cd is used to produce the diagnostic radioisotope 111In (with a half-life of 2.8 days) via the reaction 112Cd (p, 2n) 111In [94] International Atomic Energy Agency. Cyclotron Produced Radionuclides: Physical Characteristics and Production Methods, Technical Reports Series No. 468. International Atomic Energy Agency Vienna (2009)..
Cadmium chemistry is centered on Cd²⁺; the +1 state is uncommon and usually involves metal-metal bonded species rather than simple stable salts. Cadmium sulfide, CdS, is a yellow semiconductor and pigment, while cadmium selenide, CdSe, and cadmium telluride, CdTe, are important semiconducting materials. Cadmium oxide, CdO, is a brown to black oxide used in some electronic and plating-related applications. Soluble salts such as cadmium chloride, CdCl₂, and cadmium nitrate, Cd(NO₃)₂, are important laboratory or industrial intermediates but are especially hazardous because they make Cd²⁺ readily bioavailable.
See more information at the Cadmium compound page.
Cadmium metal dust, fumes, and soluble cadmium salts are highly toxic. Inhalation of cadmium oxide, CdO, fumes from heating or welding cadmium-containing materials can cause severe acute lung injury. Chronic exposure can damage kidneys and bones, and cadmium compounds are recognized human carcinogens in occupational settings. Cadmium has no known essential biological role, and exposure control is central to its handling.
Failure to appreciate the toxic properties of cadmium may cause workers to be unwittingly exposed to dangerous fumes. Silver solder, for example, which contains cadmium, should be handled with care. Serious toxicity problems have been found from long-term exposure and work with cadmium plating baths. Exposure to cadmium dust should not exceed 0.01 mg/m3 (8-hour time-weighted average, 40-hour week). The ceiling concentration (maximum), for a period of 15 min, should not exceed 0.14 mg/m3. Cadmium oxide fume exposure (8-hour, 40-hour week) should not exceed 0.05 mg/m3, and the maximum concentration should not exceed 0.05 mg/m3. These values are presently being restudied and recommendations have been made to reduce the exposure.
Cadmium is a naturally occurring trace element released by weathering, volcanism, and the processing or combustion of mineral materials. It is relatively mobile under acidic conditions and can accumulate in soils and sediments. Plants can take up Cd²⁺ from contaminated soil, allowing entry into food chains, especially near smelters, phosphate fertilizers, or waste sites. In aquatic systems, sulfide-rich sediments can immobilize cadmium as poorly soluble sulfides.
Cadmium supply is tied closely to zinc production because most recoverable cadmium is obtained from flue dusts, residues, and electrolytic refining streams during zinc processing. Demand has contracted in many regions as restrictions and substitution reduced uses in pigments, stabilizers, and consumer batteries. Remaining demand is concentrated in industrial nickel-cadmium batteries, specialized coatings, semiconductors, and control materials. Recycling is important for batteries and some industrial scrap, both to recover material and to keep cadmium out of general waste streams. There is no large independent cadmium mining industry comparable to major base metals.
Obtained as a by product of zinc refining.
Cadmium is a relatively rare element in the cosmos. Its stable isotopes are produced mainly by slow and rapid neutron-capture processes in earlier generations of stars, followed by dispersal into interstellar material. In planets it behaves as a chalcophile and moderately volatile element, so it tends to associate with sulfide phases and can be depleted from high-temperature condensed materials.
- Cadmium was identified in the early 19th century as an impurity in zinc compounds.
- Cadmium plating offers good sacrificial protection but is now tightly restricted in many applications.
- Cadmium yellow pigment is based largely on cadmium sulfide, CdS.
- Natural cadmium consists of several stable isotopes and a few very long-lived radioisotopes.
- Cadmium can form low-melting alloys used in some fusible safety devices.
- Rice and leafy vegetables can be significant dietary cadmium sources in contaminated areas.
이미지
특성
물리적 특성
- 원자 반지름(경험값)
- 155 pm 모든 원소의 원자 반지름(경험값) 비교 →
- 공유 결합 반지름
- 144 pm 모든 원소의 공유 결합 반지름 비교 →
- 반데르발스 반지름
- 158 pm 모든 원소의 반데르발스 반지름 비교 →
- 금속 반지름
- 138 pm 모든 원소의 금속 반지름 비교 →
- 밀도
- 8690 kg/m³ 모든 원소의 밀도 비교 →
- 몰 부피
- 0.0131 L/mol
- STP에서의 상
- 고체 모든 원소의 STP에서의 상 비교 →
- 녹는점
- 321.07 °C 모든 원소의 녹는점 비교 →
- 끓는점
- 766.85 °C 모든 원소의 끓는점 비교 →
- 열전도율
- 96.9 W/(m·K) 모든 원소의 열전도율 비교 →
- 비열
- 0.232 J/(g·K) 모든 원소의 비열 비교 →
- 몰 열용량
- 26.02 J/(mol·K) 모든 원소의 몰 열용량 비교 →
- 결정 구조
- 육방 조밀 충전 모든 원소의 결정 구조 비교 →
화학적 특성
- 전기 음성도(Pauling)
- 1.69 모든 원소의 전기 음성도(Pauling) 비교 →
- 전기 음성도(Allen)
- 1.52
- 전자 친화도
- -0.7 eV (음수 값 — 추가 전자를 결합하지 않을 것으로 예측됨)
- 제1 이온화 에너지
- 8.99382 eV 모든 원소의 제1 이온화 에너지 비교 →
- 제2 이온화 에너지
- 16.908371 eV 모든 원소의 제2 이온화 에너지 비교 →
- 제3 이온화 에너지
- 37.468129 eV 모든 원소의 제3 이온화 에너지 비교 →
- 제4 이온화 에너지
- 51.000176 eV 모든 원소의 제4 이온화 에너지 비교 →
- 제5 이온화 에너지
- 67.900234 eV 모든 원소의 제5 이온화 에너지 비교 →
- 산화 상태
- −2, +1, +2 모든 원소의 산화 상태 비교 →
- 원자가 전자
- 12 모든 원소의 원자가 전자 비교 →
- 전자 배치
- [Kr] 5s2 4d10
열역학적 특성
- 융해열
- 0.06436234 eV 모든 원소의 융해열 비교 →
- 기화열
- 1.036431 eV 모든 원소의 기화열 비교 →
- 승화열
- 1.160802 eV
- 원자화열
- 1.160802 eV
- 원자화 엔탈피
- 1.158729 eV
핵 특성
- 양성자 수
- 48 모든 원소의 양성자 수 비교 →
- 중성자 수
- 64 모든 원소의 중성자 수 비교 →
- 알려진 동위원소 수
- 42 모든 원소의 알려진 동위원소 수 비교 →
- 안정 동위원소 수
- 3 모든 원소의 안정 동위원소 수 비교 →
- 가장 안정한 동위원소
- Cd-112
- 발견 연도
- 1817
존재비
- 존재비(지각)
- 0.15 mg/kg 모든 원소의 존재비(지각) 비교 →
- 존재비(해양)
- 1.1 × 10−4 mg/L 모든 원소의 존재비(해양) 비교 →
결정 구조
- 격자 상수 a
- 298 pm
전자 구조
- 전자껍질별 전자 수
- 2, 8, 18, 18, 2 모든 원소의 전자껍질별 전자 수 비교 →
식별자
- CAS 등록 번호
- 7440-43-9 모든 원소의 CAS 등록 번호 비교 →
- 항 기호
- 1S0
- InChI
- InChI=1S/Cd
- InChI 키
- BDOSMKKIYDKNTQ-UHFFFAOYSA-N
전자 배치 측정값
Cd: 4d¹⁰ 5s²[Kr] 4d¹⁰ 5s²1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s²원자 모형
동위원소에 따라 중성자 수, 질량, 안정성은 달라지지만, 중성 원자의 전자 배치는 달라지지 않습니다.
개략적인 원자 모형이며 실제 비율과 다릅니다.
원자 지문
방출 / 흡수 스펙트럼
동위원소 분포
| 질량수 | 원자 질량(u) | 천연 존재비 | 반감기 |
|---|---|---|---|
| 110 안정 | 109.90300661 ± 0.00000061 | 12.4900% | 안정 |
| 111 안정 | 110.90418287 ± 0.00000061 | 12.8000% | 안정 |
| 112 안정 | 111.90276287 ± 0.0000006 | 24.1300% | 안정 |
상 / 상태
이유: 녹는점(321.07 °C)보다 296.1 °C 낮음
개략도이며 실제 비율과 다름
상전이점
전이 에너지
녹는점에서 1 mol을 녹이는 데 필요한 에너지
끓는점에서 1 mol을 기화시키는 데 필요한 에너지
승화점에서 1 mol을 승화시키는 데 필요한 에너지
밀도
표준 조건에서
표준 조건에서
원자 스펙트럼
전체 48개 중 10개를 표시합니다. 이온 전하순으로 정렬되었습니다(오름차순).
보유 스펙트럼선 데이터 ?
| 이온 | 전하 | 총 스펙트럼선 수 | 전이 확률 | 준위 표기 |
|---|---|---|---|---|
| Cd I | 0 | 69 | 18 | 69 |
| Cd II | +1 | 173 | 87 | 173 |
| Cd III | +2 | 95 | 0 | 0 |
| Cd IV | +3 | 102 | 0 | 0 |
보유 에너지 준위 데이터 ?
| 이온 | 전하 | 준위 |
|---|---|---|
| Cd I | 0 | 128 |
| Cd II | +1 | 101 |
| Cd III | +2 | 48 |
| Cd IV | +3 | 52 |
| Cd V | +4 | 2 |
| Cd VI | +5 | 2 |
| Cd VII | +6 | 2 |
| Cd VIII | +7 | 2 |
| Cd IX | +8 | 2 |
| Cd X | +9 | 2 |
이온 반지름
| 전하 | 배위 | 스핀 | 반지름 |
|---|---|---|---|
| +2 | 4 | 해당 없음 | 78 pm |
| +2 | 5 | 해당 없음 | 87 pm |
| +2 | 6 | 해당 없음 | 95 pm |
| +2 | 7 | 해당 없음 | 103 pm |
| +2 | 8 | 해당 없음 | 110.00000000000001 pm |
| +2 | 12 | 해당 없음 | 131 pm |
화합물
동위원소 (3)
| 질량수 | 원자 질량(u) | 천연 존재비 | 반감기 | 붕괴 방식 | |
|---|---|---|---|---|---|
| 110 안정 | 109.90300661 ± 0.00000061 | 12.4900% ± 0.1800% | 안정 | stable | |
| 111 안정 | 110.90418287 ± 0.00000061 | 12.8000% ± 0.1200% | 안정 | stable | |
| 112 안정 | 111.90276287 ± 0.0000006 | 24.1300% ± 0.2100% | 안정 | stable |
스펙트럼선
| 파장(nm) | 세기 | 이온화 단계 | 유형 | 전이 | 정확도 | 출처 | |
|---|---|---|---|---|---|---|---|
| 398.19257 nm | 10 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.9s 1S | 측정값 | NIST | |
| 414.03021 nm | 해당 없음 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.7d 1D | 측정값 | NIST | |
| 430.66718 nm | 8 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.8s 1S | 측정값 | NIST | |
| 441.29894 nm | 3 | Cd I | emission | 4d10.5s.5p 3P* → 4d10.5s.6s 1S | 측정값 | NIST | |
| 466.2352 nm | 8 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.6d 1D | 측정값 | NIST | |
| 467.815 nm | 200 | Cd I | emission | 4d10.5s.5p 3P* → 4d10.5s.6s 3S | 측정값 | NIST | |
| 479.99121 nm | 300 | Cd I | emission | 4d10.5s.5p 3P* → 4d10.5s.6s 3S | 측정값 | NIST | |
| 508.58214 nm | 해당 없음 | Cd I | emission | 4d10.5s.5p 3P* → 4d10.5s.6s 3S | 측정값 | NIST | |
| 515.46618 nm | 6 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.7s 1S | 측정값 | NIST | |
| 609.9142 nm | 300 | Cd I | emission | 4d10.5s.6s 3S → 4d10.5s.8p 3P* | 측정값 | NIST | |
| 611.1495 nm | 100 | Cd I | emission | 4d10.5s.6s 3S → 4d10.5s.8p 3P* | 측정값 | NIST | |
| 632.51689 nm | 100 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.5d 3D | 측정값 | NIST | |
| 633.00149 nm | 30 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.5d 3D | 측정값 | NIST | |
| 643.84695 nm | 2000 | Cd I | emission | 4d10.5s.5p 1P* → 4d10.5s.5d 1D | 측정값 | NIST | |
| 677.8116 nm | 30 | Cd I | emission | 4d10.5s.6s 1S → 4d10.5s.8p 1P* | 측정값 | NIST | |
| 734.5665 nm | 1000 | Cd I | emission | 4d10.5s.6s 3S → 4d10.5s.7p 3P* | 측정값 | NIST |
확장 특성
공유 결합 반지름(확장)
- 공유 결합 반지름(Pyykkö)
- 136 pm
- 공유 결합 반지름(Pyykkö, 이중 결합)
- 144 pm
- 공유 결합 반지름(Bragg)
- 160 pm
반데르발스 반지름
- Batsanov
- 220 pm
- Alvarez
- 249 pm
- UFF
- 284.8 pm
- MM3
- 250 pm
원자 및 금속 반지름
- 원자 반지름(Rahm)
- 238 pm
- 금속 반지름(C12)
- 151 pm
번호 척도
- Mendeleev
- 78
- Pettifor
- 75
- Glawe
- 75
전기 음성도 척도
- Ghosh
- 0
- Miedema
- 4
- Gunnarsson–Lundqvist
- 4
- Robles–Bartolotti
- 3
분극률 및 분산
- 쌍극자 분극률
- 46 a.u.
- 쌍극자 분극률(불확도)
- 2 a.u.
- C₆ (Gould–Bučko)
- 405 Ha·Bohr6
미데마 매개변수
- 미데마 몰 부피
- 13 cm3/mol
- 미데마 전자 밀도
- 2
공급 위험 및 경제성
- 생산 집중도
- 32
- 상대적 공급 위험
- 7
- 매장량 분포
- 20
- 정치적 안정성(최대 생산국)
- 24
- 정치적 안정성(최대 매장국)
- 11
상전이 및 동소체
| 녹는점 | 594.22 K |
| 끓는점 | 1040.15 K |
산화 상태 분류
심화 참고 데이터
차폐 상수 (10)
| n | 오비탈 | σ |
|---|---|---|
| 1 | s | 0.9744 |
| 2 | p | 4.091 |
| 2 | s | 12.6142 |
| 3 | d | 14.3931 |
| 3 | p | 17.3085 |
| 3 | s | 17.1588 |
| 4 | d | 32.1232 |
| 4 | p | 28.5888 |
| 4 | s | 27.1308 |
| 5 | s | 39.808 |
결정 반지름 상세 정보 (6)
| 전하 | CN | 스핀 | rcrystal (pm) | 기원 |
|---|---|---|---|---|
| 2 | IV | 92 | ||
| 2 | V | 101 | ||
| 2 | VI | 109 | ||
| 2 | VII | 117 | calculated, | |
| 2 | VIII | 124 | calculated, | |
| 2 | XII | 145 |
동위원소 붕괴 방식 (59)
| 동위원소 | 모드 | 세기 |
|---|---|---|
| 94 | B+ | — |
| 94 | B+p | — |
| 95 | B+ | 100% |
| 95 | B+p | 4.6% |
| 96 | B+ | 100% |
| 96 | B+p | 1.6% |
| 97 | B+ | 100% |
| 97 | B+p | 7.4% |
| 98 | B+ | 100% |
| 98 | B+p | 0% |
X선 산란 인자 (510)
| 에너지 (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 0.40004 |
| 10.1617 | — | 0.41842 |
| 10.3261 | — | 0.43764 |
| 10.4931 | — | 0.45775 |
| 10.6628 | — | 0.49362 |
| 10.8353 | — | 0.53685 |
| 11.0106 | — | 0.59258 |
| 11.1886 | — | 0.66328 |
| 11.3696 | — | 0.74242 |
| 11.5535 | — | 0.86125 |
추가 데이터
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
1.5×10-1 milligrams per kilogram
참고 문헌 (1)
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
1.1×10-4 milligrams per liter
참고 문헌 (1)
참고 문헌
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Cadmium.
The element property data was retrieved from publications.