Antimony (Sb)
metalloidSolid
मानक परमाणु भार
121.76 uइलेक्ट्रॉन विन्यास
[Kr] 5s2 4d10 5p3गलनांक
630.63 °Cक्वथनांक
1586.85 °Cघनत्व
6685 kg/m³ऑक्सीकरण अवस्थाएँ
−3, −2, −1, 0, +1, +2, +3, +4, +5विद्युतऋणात्मकता (पॉलिंग)
2.05आयनन ऊर्जा (प्रथम)
8.608389 eVखोज का वर्ष
1707परमाणु त्रिज्या
145 pmविवरण
Antimony is a brittle p-block metalloid in group 15. It commonly shows oxidation states +3 and +5, with chemistry that bridges arsenic and bismuth. The element is best known as a hardening additive for lead alloys and as a component of flame-retardant systems through antimony trioxide. Natural antimony is usually encountered in sulfide minerals rather than as native metal.
Antimony is a poor conductor of heat and electricity. Antimony and many of its compounds are toxic.
The name derives from the Greek, anti + monos for "not alone" or "not one" because it was found in many compounds. The symbol Sb comes from stibium, which is derived from the Greek stibi for "mark" because it was used for blackening eyebrows and eyelashes. The minerals stibnite (Sb2S3) and stibine (SbH3) are two of more than one hundred mineral species, which were known in the ancient world.
Antimony has been known since ancient times. It is sometimes found free in nature, but is usually obtained from the ores stibnite (Sb2S3) and valentinite (Sb2O3). Nicolas Lémery, a French chemist, was the first person to scientifically study antimony and its compounds. He published his findings in 1707. Antimony makes up about 0.00002% of the earth's crust.
From the Greek word anti plus monos - "a metal not found alone". Antimony was recognized in compounds by the ancients and was known as a metal at the beginning of the 17th century and possibly much earlier.
Pure antimony is a silvery white, lustrous solid with a crystalline, flaky fracture. It is hard enough to take a polish but is very brittle and can be pulverized. The stable form at ordinary conditions is metallic in appearance, although it has semimetallic electrical behavior.
The largest uses of antimony are tied to compounds rather than the pure element. Antimony trioxide, Sb₂O₃, is widely used as a synergist with halogenated flame retardants in plastics, textiles, and coatings. Metallic antimony hardens lead in lead-acid battery grids, ammunition, and some bearing or type-metal alloys. Smaller uses include glass fining, ceramic opacifiers or color modifiers, and antimony-containing semiconductors such as indium antimonide, InSb.
Antimony is a brittle metal and is a poor conductor of heat and electricity. Very pure antimony is used to make certain types of semiconductor devices, such as diodes and infrared detectors. Antimony is alloyed with lead to increase lead's durability. Antimony alloys are also used in batteries, low friction metals, type metal and cable sheathing, among other products. Antimony compounds are used to make flame-proofing materials, paints, ceramic enamels, glass and pottery. The ancient Egyptians used antimony, in the form of stibnite, for black eye make-up.
Antimony is finding use in semiconductor technology for making infrared detectors, diodes and Hall-effect devices. It greatly increases the hardness and mechanical strength of lead. Batteries, antifriction alloys, type metal, small arms and tracer bullets, cable sheathing, and minor products use about half the metal produced. Compounds taking up the other half are oxides, sulfides, sodium antimonate, and antimony trichloride. These are used in manufacturing flame-proofing compounds, paints ceramic enamels, glass, and pottery.
Isotopes in Earth/Planetary Science
Molecules, atoms, and ions of the stable isotopes of antimony possess slightly different physical and chemical properties, and they commonly will be fractionated during physical, chemical, and biological processes, giving rise to variations in isotopic abundances and in atomic weights. There are measureable substantial variations in the isotopic abundances of antimony in natural terrestrial materials (Fig. IUPAC.51.1) [370] O. Rouxel, J. Ludden, Y. Fouquet. Chem. Geol.200, 25 (2003).. The stable isotopes 121Sb and 123Sb have been used to measure movement of sediments and rocks originating from locations high in antimony. 121Sb and 123Sb move with the sediments and have been used as tracers in areas low in antimony to determine the originating location of certain metal/metalloid contaminants in streams [371] B. Chauvenet, M. M. Be, M. N. Amiot, C. Bobin, M. C. Lepy, T. Branger, I. Laniece, A. Luca, M. Sahagia, A. C. Watjen, K. Kossert, O. Ott, O. Nahle, P. Dryak, J. Sochorova, P. Kovar, P. Auerbach, T. Altzitzoglou, S. Pomme, G. Sibbens, R. Van Ammel, J. Paepen, A. Iwahara, J. U. Delgado, R. Poledna, C. J. da Silva, L. Johansson, A. Stroak, C. Bailat, Y. Nedjadi, P. Spring. Appl. Radiat. Isot.68, 1207 (2010)., [372] M. Baeza, J. Ren, S. Krishnamurthy, T. C. Vaughan. Arch. Environ. Contam. Toxicol.8, 299 (2010)., [373] L. Wilson. “Determination of trace element provenance in the Rio Loa Basin, Chile”, in 2010 Geological Society of America Presentation..
Isotopes in Industry
In the 1950s, 124Sb and 125Sb (with half-lives of 60 days and about 1000 days, respectively) were used commercially as tracers. They were injected into oil pipelines as a way to detect the residence time and flow rate of the substance through the pipeline. The presence of these isotopes could be detected by means of a Geiger counter held above the pipeline. If the pipeline had a leak, the tracer would escape and its contamination and movement could be detected in the soil. 124Sb and 125Sb are now both treated as environmental contaminants [375] R. Gibbs. Popular Mech.117, 117 (1955)..
Isotopes Used as a Source of Radioactive Isotope(s)
123Sb is used to produce 124I (with a half-life of 100 h), which is used in radioimmunotherapy and also in positron emission tomography. It can be produced from the 123Sb (3He, 2n) 124I reaction [376] M. S. Uddin, A. Hermanne, S. Sudár, M. N. Aslam, B. Scholten, H. H. Coenen, S. M. Qaim. Appl. Radiat. Isot.69, 699 (2010).. 121Sb and 123Sb can both be used for the production of 123I (with a half-life of 13.2 h) via 3He and alpha particle-induced reactions with 121Sb and 123Sb, although the most common production route is via 124Xe or 123Te [377] K. F. Hassan, S. M. Qaim, Z. A. Saleh, H. H. Coenen. Appl. Radiat. Isot.64, 101 (2006)..
Antimony forms stable trivalent and pentavalent compounds, with Sb(III) generally more common. Stibnite, Sb₂S₃, is the principal ore mineral and a representative sulfide. Antimony trioxide, Sb₂O₃, is amphoteric and dissolves in strong acids or bases under suitable conditions. Antimony pentachloride, SbCl₅, is a strong Lewis acid, while antimony trifluoride, SbF₃, is a useful fluorinating reagent. Complex antimonates contain Sb(V) in oxide frameworks.
See more information at the Antimony compound page.
Elemental antimony is less readily absorbed than many soluble compounds, but dust and fumes can irritate the respiratory tract and should be controlled. Soluble antimony(III) compounds are generally more toxic than many antimony(V) compounds. Antimony trioxide, Sb₂O₃, has occupational inhalation concerns and is classified in several jurisdictions as a suspected or possible carcinogenic hazard. Stibine, SbH₃, is a highly toxic gas.
Antimony is a trace element in the crust and is concentrated mainly in sulfide deposits. Weathering of antimony minerals can release antimony species to soils and waters, where mobility depends strongly on pH, redox state, and adsorption to iron and manganese oxides. Mining, smelting, coal combustion, waste incineration, and wear or disposal of antimony-containing products can add local contamination. It has no known essential biological role.
Antimony supply is based mainly on mining and processing stibnite ores, with additional recovery as a by-product from some complex lead, copper, and precious-metal operations. Concentrates are roasted or otherwise converted to oxides and then reduced or refined, depending on the desired product. Demand is dominated by flame-retardant applications and lead-alloy use, especially batteries. Supply is relatively concentrated geographically, so recycling from lead-acid batteries and substitution in flame-retardant systems are important industrial considerations.
Antimony is not abundant, but is found in over 100 mineral species. It is sometimes found natively, but more frequently it is found as the sulfide stibnite.
Antimony is a relatively uncommon heavy element in the cosmos. Its stable isotopes are produced chiefly by neutron-capture processes in earlier generations of stars, including slow neutron capture in evolved stars and rapid neutron capture in explosive events. In planetary materials it behaves as a chalcophile element, tending to associate with sulfur-rich phases rather than silicate minerals.
- The symbol Sb comes from stibium, a Latin name associated with antimony sulfide.
- Antimony expands slightly on solidifying, a property useful in sharp-casting alloys.
- Stibnite crystals can form long metallic-gray blades with a very low hardness.
- Indium antimonide, InSb, has a very narrow band gap and is used in infrared detectors.
- Antimony has two stable natural isotopes, ¹²¹Sb and ¹²³Sb.
चित्र
गुण
भौतिक
- परमाणु त्रिज्या (आनुभविक)
- 145 pm सभी तत्वों की परमाणु त्रिज्या (आनुभविक) की तुलना करें →
- सहसंयोजक त्रिज्या
- 139 pm सभी तत्वों की सहसंयोजक त्रिज्या की तुलना करें →
- वान डर वाल्स त्रिज्या
- 206 pm सभी तत्वों की वान डर वाल्स त्रिज्या की तुलना करें →
- धात्विक त्रिज्या
- 139 pm सभी तत्वों की धात्विक त्रिज्या की तुलना करें →
- घनत्व
- 6685 kg/m³ सभी तत्वों की घनत्व की तुलना करें →
- मोलर आयतन
- 0.0184 L/mol
- STP पर प्रावस्था
- ठोस सभी तत्वों की STP पर प्रावस्था की तुलना करें →
- गलनांक
- 630.63 °C सभी तत्वों की गलनांक की तुलना करें →
- क्वथनांक
- 1586.85 °C सभी तत्वों की क्वथनांक की तुलना करें →
- तापीय चालकता
- 24.43 W/(m·K) सभी तत्वों की तापीय चालकता की तुलना करें →
- विशिष्ट ऊष्मा धारिता
- 0.207 J/(g·K) सभी तत्वों की विशिष्ट ऊष्मा धारिता की तुलना करें →
- मोलर ऊष्मा धारिता
- 25.23 J/(mol·K) सभी तत्वों की मोलर ऊष्मा धारिता की तुलना करें →
- क्रिस्टल संरचना
- समचतुर्भुजीय सभी तत्वों की क्रिस्टल संरचना की तुलना करें →
रासायनिक
- विद्युतऋणात्मकता (पॉलिंग)
- 2.05 सभी तत्वों की विद्युतऋणात्मकता (पॉलिंग) की तुलना करें →
- विद्युतऋणात्मकता (ऐलन)
- 1.984
- इलेक्ट्रॉन बंधुता
- 1.07 eV
- आयनन ऊर्जा (प्रथम)
- 8.608389 eV सभी तत्वों की आयनन ऊर्जा (प्रथम) की तुलना करें →
- आयनन ऊर्जा (द्वितीय)
- 16.626057 eV सभी तत्वों की आयनन ऊर्जा (द्वितीय) की तुलना करें →
- आयनन ऊर्जा (तृतीय)
- 25.323587 eV सभी तत्वों की आयनन ऊर्जा (तृतीय) की तुलना करें →
- आयनन ऊर्जा (चतुर्थ)
- 43.804151 eV सभी तत्वों की आयनन ऊर्जा (चतुर्थ) की तुलना करें →
- आयनन ऊर्जा (पंचम)
- 55.000189 eV सभी तत्वों की आयनन ऊर्जा (पंचम) की तुलना करें →
- ऑक्सीकरण अवस्थाएँ
- −3, −2, −1, 0, +1, +2, +3, +4, +5 सभी तत्वों की ऑक्सीकरण अवस्थाएँ की तुलना करें →
- संयोजकता इलेक्ट्रॉन
- 5 सभी तत्वों की संयोजकता इलेक्ट्रॉन की तुलना करें →
- अपररूप
- ["gray"]
- इलेक्ट्रॉन विन्यास
- [Kr] 5s2 4d10 5p3
ऊष्मागतिक
- गलन ऊष्मा
- 0.20417682 eV सभी तत्वों की गलन ऊष्मा की तुलना करें →
- वाष्पन ऊष्मा
- 0.70477276 eV सभी तत्वों की वाष्पन ऊष्मा की तुलना करें →
- ऊर्ध्वपातन ऊष्मा
- 2.02104 eV
- परमाणुकरण ऊष्मा
- 2.715448 eV
- परमाणुकरण एन्थैल्पी
- 2.740322 eV
नाभिकीय
- प्रोटॉन
- 51 सभी तत्वों की प्रोटॉन की तुलना करें →
- न्यूट्रॉन
- 70 सभी तत्वों की न्यूट्रॉन की तुलना करें →
- ज्ञात समस्थानिक
- 41 सभी तत्वों की ज्ञात समस्थानिक की तुलना करें →
- स्थिर समस्थानिक
- 2 सभी तत्वों की स्थिर समस्थानिक की तुलना करें →
- सबसे स्थिर समस्थानिक
- Sb-121
- खोज का वर्ष
- 1707
प्रचुरता
- प्रचुरता (भूपर्पटी)
- 0.2 mg/kg सभी तत्वों की प्रचुरता (भूपर्पटी) की तुलना करें →
- प्रचुरता (महासागर)
- 2.4 × 10−4 mg/L सभी तत्वों की प्रचुरता (महासागर) की तुलना करें →
क्रिस्टल संरचना
- जालक स्थिरांक a
- 451 pm
इलेक्ट्रॉनिक संरचना
- प्रति कोश इलेक्ट्रॉन
- 2, 8, 18, 18, 5 सभी तत्वों की प्रति कोश इलेक्ट्रॉन की तुलना करें →
पहचानकर्ता
- CAS संख्या
- 7440-36-0 सभी तत्वों की CAS संख्या की तुलना करें →
- टर्म प्रतीक
- 4S°3/2
- InChI
- InChI=1S/Sb
- InChI कुंजी
- WATWJIUSRGPENY-UHFFFAOYSA-N
इलेक्ट्रॉन विन्यास मापित
Sb: 4d¹⁰ 5s² 5p³[Kr] 4d¹⁰ 5s² 5p³1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p³परमाणु मॉडल
समस्थानिक न्यूट्रॉन की संख्या, द्रव्यमान और स्थिरता बदलते हैं — उदासीन परमाणु का इलेक्ट्रॉन विन्यास नहीं।
सांकेतिक परमाणु मॉडल, वास्तविक अनुपात में नहीं।
परमाणु पहचान-चिह्न
उत्सर्जन / अवशोषण स्पेक्ट्रम
समस्थानिक वितरण
| द्रव्यमान संख्या | परमाणु द्रव्यमान (u) | प्राकृतिक प्रचुरता | अर्धायु |
|---|---|---|---|
| 121 स्थिर | 120.903812 ± 0.000003 | 57.2100% | स्थिर |
| 123 स्थिर | 122.9042132 ± 0.0000023 | 42.7900% | स्थिर |
प्रावस्था / अवस्था
कारण: गलनांक (630.63 °C) से 605.6 °C कम
सांकेतिक, वास्तविक अनुपात में नहीं
प्रावस्था संक्रमण बिंदु
संक्रमण ऊर्जाएँ
गलनांक पर 1 mol को पिघलाने के लिए आवश्यक ऊर्जा
क्वथनांक पर 1 mol को वाष्पित करने के लिए आवश्यक ऊर्जा
ऊर्ध्वपातनांक पर 1 mol के ऊर्ध्वपातन के लिए आवश्यक ऊर्जा
घनत्व
मानक परिस्थितियों में
मानक परिस्थितियों में
परमाणु स्पेक्ट्रम
51 में से 10 दिखाए जा रहे हैं। आयन के आवेश के अनुसार आरोही क्रम में व्यवस्थित।
उपलब्ध स्पेक्ट्रमी रेखा डेटा ?
| आयन | आवेश | कुल रेखाएँ | संक्रमण प्रायिकताएँ | स्तर पदनाम |
|---|---|---|---|---|
| Sb I | 0 | 135 | 10 | 128 |
| Sb II | +1 | 90 | 2 | 61 |
| Sb III | +2 | 61 | 0 | 0 |
| Sb IV | +3 | 14 | 0 | 0 |
| Sb V | +4 | 8 | 0 | 0 |
उपलब्ध ऊर्जा स्तर डेटा ?
| आयन | आवेश | स्तर |
|---|---|---|
| Sb I | 0 | 153 |
| Sb II | +1 | 110 |
| Sb III | +2 | 24 |
| Sb IV | +3 | 29 |
| Sb V | +4 | 9 |
| Sb VI | +5 | 60 |
| Sb VII | +6 | 2 |
| Sb VIII | +7 | 2 |
| Sb IX | +8 | 2 |
| Sb X | +9 | 2 |
आयनिक त्रिज्याएँ
| आवेश | उपसहसंयोजन | प्रचक्रण | त्रिज्या |
|---|---|---|---|
| +3 | 4 | उपलब्ध नहीं | 76 pm |
| +3 | 5 | उपलब्ध नहीं | 80 pm |
| +3 | 6 | उपलब्ध नहीं | 76 pm |
| +5 | 6 | उपलब्ध नहीं | 60 pm |
यौगिक
समस्थानिक (2)
| द्रव्यमान संख्या | परमाणु द्रव्यमान (u) | प्राकृतिक प्रचुरता | अर्धायु | क्षय का प्रकार | |
|---|---|---|---|---|---|
| 121 स्थिर | 120.903812 ± 0.000003 | 57.2100% ± 0.0500% | स्थिर | stable | |
| 123 स्थिर | 122.9042132 ± 0.0000023 | 42.7900% ± 0.0500% | स्थिर | stable |
स्पेक्ट्रमी रेखाएँ
| तरंगदैर्घ्य (nm) | तीव्रता | आयनन अवस्था | प्रकार | संक्रमण | सटीकता | स्रोत | |
|---|---|---|---|---|---|---|---|
| 403.35367 nm | 200 | Sb I | emission | 5p3 2P* → 5p2.(3P).6s 4P | मापित | NIST | |
| 475.77494 nm | 20 | Sb I | emission | 5p2.(3P).6s 4P → 5p2.(3P<2>).7p (2,3/2)* | मापित | NIST | |
| 549.02252 nm | उपलब्ध नहीं | Sb I | emission | 5p2.(3P).6s 4P → 5p2.(3P<2>).7p (2,1/2)* | मापित | NIST | |
| 555.60108 nm | उपलब्ध नहीं | Sb I | emission | 5p2.(3P).6s 2P → 5p2.(1D<2>).6p (2,1/2)* | मापित | NIST | |
| 560.20647 nm | उपलब्ध नहीं | Sb I | emission | 5p2.(3P).6s 4P → 5p2.(3P<1>).7p (1,3/2)* | मापित | NIST | |
| 563.19352 nm | उपलब्ध नहीं | Sb I | emission | 5p2.(3P).6s 4P → 5p2.(3P<0>).7p (0,3/2)* | मापित | NIST | |
| 573.02392 nm | उपलब्ध नहीं | Sb I | emission | 5p2.(3P).6s 2P → 5p2.(3P<2>).7p (2,3/2)* | मापित | NIST | |
| 661.1381 nm | 20 | Sb I | emission | 5p2.(3P).6s 2P → 5p2.(1D<2>).6p (2,1/2)* | मापित | NIST |
विस्तृत गुण
सहसंयोजक त्रिज्याएँ (विस्तृत)
- सहसंयोजक त्रिज्या (प्यूक्को)
- 140 pm
- सहसंयोजक त्रिज्या (प्यूक्को, द्विबंध)
- 133 pm
- सहसंयोजक त्रिज्या (प्यूक्को, त्रिबंध)
- 127 pm
- सहसंयोजक त्रिज्या (ब्रैग)
- 140 pm
वान डर वाल्स त्रिज्याएँ
- Truhlar
- 206 pm
- Batsanov
- 220 pm
- Alvarez
- 247 pm
- UFF
- 442 pm
- MM3
- 252 pm
- Dreiding
- 435 pm
परमाणु और धात्विक त्रिज्याएँ
- परमाणु त्रिज्या (राह्म)
- 246 pm
- धात्विक त्रिज्या (C12)
- 166 pm
संख्यांकन मापक्रम
- Mendeleev
- 96
- Pettifor
- 88
- Glawe
- 91
विद्युतऋणात्मकता मापक्रम
- Ghosh
- 0
- Miedema
- 4
- Gunnarsson–Lundqvist
- 5
- Robles–Bartolotti
- 4
ध्रुवणीयता और परिक्षेपण
- द्विध्रुव ध्रुवणीयता
- 43 a.u.
- द्विध्रुव ध्रुवणीयता (अनिश्चितता)
- 2 a.u.
- C₆
- 492 Ha·Bohr6
- C₆ (Gould–Bučko)
- 504 Ha·Bohr6
मीडेमा प्राचल
- मीडेमा मोलर आयतन
- 16.95 cm3/mol
- मीडेमा इलेक्ट्रॉन घनत्व
- 2
आपूर्ति जोखिम और अर्थशास्त्र
- उत्पादन संकेंद्रण
- 88
- सापेक्ष आपूर्ति जोखिम
- 9
- भंडार वितरण
- 53
- राजनीतिक स्थिरता (प्रमुख उत्पादक)
- 24
- राजनीतिक स्थिरता (सबसे अधिक भंडार वाला देश)
- 24
प्रावस्था संक्रमण और अपररूप
| गलनांक | 903.78 K |
| क्वथनांक | 1860.15 K |
ऑक्सीकरण अवस्था की श्रेणियाँ
उन्नत संदर्भ डेटा
परिरक्षण स्थिरांक (11)
| n | कक्षक | σ |
|---|---|---|
| 1 | s | 1.0256 |
| 2 | p | 4.1274 |
| 2 | s | 13.4046 |
| 3 | d | 14.2002 |
| 3 | p | 17.8161 |
| 3 | s | 17.7909 |
| 4 | d | 32.0256 |
| 4 | p | 28.8188 |
| 4 | s | 27.4564 |
| 5 | p | 41.0055 |
क्रिस्टल त्रिज्याओं का विवरण (4)
| आवेश | CN | प्रचक्रण | rcrystal (pm) | उत्पत्ति |
|---|---|---|---|---|
| 3 | IVPY | 90 | ||
| 3 | V | 94 | ||
| 3 | VI | 90 | Ahrens (1952) ionic radius, | |
| 5 | VI | 74 |
समस्थानिक क्षय के प्रकार (61)
| समस्थानिक | मोड | तीव्रता |
|---|---|---|
| 102 | p | — |
| 103 | p | — |
| 104 | B+ | — |
| 104 | B+p | 7% |
| 104 | p | 7% |
| 104 | A | — |
| 105 | B+ | 100% |
| 105 | p | 0.1% |
| 105 | B+p | — |
| 106 | B+ | 100% |
एक्स-रे प्रकीर्णन गुणक (508)
| ऊर्जा (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 9.95091 |
| 10.1617 | — | 10.0681 |
| 10.3261 | — | 9.92927 |
| 10.4931 | — | 9.42377 |
| 10.6628 | — | 8.92685 |
| 10.8353 | — | 8.35287 |
| 11.0106 | — | 7.84004 |
| 11.1886 | — | 7.4678 |
| 11.3696 | — | 7.10503 |
| 11.5535 | — | 6.73907 |
अतिरिक्त डेटा
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
2×10-1 milligrams per kilogram
संदर्भ (1)
- [5] Antimony https://education.jlab.org/itselemental/ele051.html
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
2.4×10-4 milligrams per liter
संदर्भ (1)
- [5] Antimony https://education.jlab.org/itselemental/ele051.html
Sources
Sources of this element.
Antimony is not abundant, but is found in over 100 mineral species. It is sometimes found natively, but more frequently it is found as the sulfide stibnite.
संदर्भ (1)
- [6] Antimony https://periodic.lanl.gov/51.shtml
संदर्भ
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Antimony.
The element property data was retrieved from publications.