Dubnium (Db)
transition-metalSolid
Nguyên tử khối chuẩn
[268]Cấu hình electron
[Rn] 7s2 5f14 6d3Nhiệt độ nóng chảy
Không cóNhiệt độ sôi
Không cóKhối lượng riêng
2,93e+4 kg/m³Trạng thái oxi hóa
+3, +4, +5Độ âm điện (Pauling)
Không cóNăng lượng ion hóa (lần 1)
6,8 eVNăm phát hiện
1967Bán kính nguyên tử
139 pmChi tiết
Dubnium is a synthetic transactinide element in group 5, below tantalum. It is known only from accelerator-produced atoms of radioactive isotopes, so its chemistry is studied by rapid, highly sensitive methods rather than by weighing or handling bulk material. Its observed behavior is broadly consistent with a heavy group 5 element, though relativistic effects and nuclear instability make its chemistry experimentally difficult.
Dubnium does not occur naturally in the Earth’s crust. Credit for the first synthesis of this element is given jointly to Albert Ghiorso and his team at the University of California in Berkeley and Georgi Flerov and his team at the Joint Institute for Nuclear Research (JINR) in Dubna, Russia (Fig. IUPAC.105.1). The element is named for the location of the Joint Institute for Nuclear Research (JINR) laboratory in Dubna, Russia [646], [647]. Dubnium has no isotopic applications outside of scientific research.
Dubnium is named after the site of the Joint Institute for Nuclear Research in Dubna, Russia.
Scientists working at the Joint Institute for Nuclear Research in Dubna, Russia, first reported the production of dubnium in 1967. They bombarded atoms of americium-243 with ions of neon-22, forming atoms of dubnium-260 and five free neutrons and atoms of dubnium-261 and four free neutrons. In 1970, a group of scientists working at the Lawrence Radiation Laboratory, now known as the Lawrence Berkeley Laboratory, in Berkeley, California, bombarded atoms of californium-249 with ions of nitrogen-15, forming atoms of dubnium-260 and 4 free neutrons. Credit for the discovery of dubnium is still under debate. Dubnium's most stable isotope, dubnium-268, has a half-life of about 32 hours and decays through spontaneous fission.
In 1967 G.N. Flerov reported that a Soviet team working at the Joint Institute for Nuclear Research at Dubna may have produced a few atoms of 260105 and 261105 by bombarding 243Am with 22Ne. The evidence was based on time-coincidence measurements of alpha energies.
In 1970 Dubna scientists synthesized Element 105 and, by the end of April 1970, "had investigated all the types of decay of the new element and had determined its chemical properties," according to a report in 1970. The Soviet group had not proposed a name for 105. In late April 1970, it was announced that Ghiorso, Nurmia, Haris, K.A.Y. Eskola, and P.L. Eskola, working at the University of California at Berkeley, had positively identified element 105. The discovery was made by bombarding a target of 249Cf with a beam of 84 MeV nitrogen nuclei in the Heavy Ion Linear Accelerator (HILAC). When a15N nuclear is absorbed by a 249Cf nucleus, four neutrons are emitted and a new atom of 260105 with a half-life of 1.6 s is formed. While the first atoms of Element 105 are said to have been detected conclusively on March 5, 1970, there is evidence that Element 105 had been formed in Berkeley experiments a year earlier by the method described.
Ghiorso and his associates have attempted to confirm Soviet findings by more sophisticated methods without success. The Berkeley Group proposed the name hahnium after the late German scientist Otto Hahn (1879-1968) and symbol Ha. However, the International Union of Pure and Applied Chemistry panel members in 1977 recommended that element 105 be named to Dubnium (symbol Db) after the site of the Joint Institute for Nuclear Research in Russia. Unfortunately, the name hahnium will not be used again according to the rules for naming new elements. Some scientists still use the earlier name of hahnium because it had been used for about 25 years.
No macroscopic sample of dubnium has been prepared, and its visible appearance is unknown. Metallic bulk properties such as color, density, melting point, and hardness are therefore predicted or extrapolated rather than directly measured.
Dubnium has no practical use outside scientific research. Its isotopes are produced in nuclear reaction experiments to study superheavy nuclei, decay chains, spontaneous fission, and the chemical behavior of the heaviest group 5 element. Individual atoms have also been used in comparative transactinide chemistry, where separation behavior is measured before radioactive decay. There are no commercial, industrial, medical, or consumer applications.
Due to the small amounts produced and its short half-life, there are currently no uses for dubnium outside of basic scientific research.
Dubnium chemistry has been investigated mainly in aqueous and gas-phase separation systems at the atom-at-a-time scale. The most accessible oxidation state is expected to be +5, by analogy with niobium and tantalum, and experiments support formation of group 5-like halide and oxyhalide species. Volatile dubnium pentachloride, DbCl₅, and dubnium oxychloride, DbOCl₃, are inferred in thermochromatography studies, although such species are not isolated as ordinary samples. Lower oxidation states remain poorly characterized.
See more information at the Dubnium compound page.
The safety hazards of dubnium are dominated by radioactivity rather than ordinary chemical toxicity. All known isotopes are short-lived, and some decay by alpha emission or spontaneous fission. The quantities made are far below macroscopic toxicological relevance, but accelerator targets, recoil products, and daughter nuclides require radiological controls. Isotope-specific half-lives and decay modes determine the actual hazard in an experiment.
Dubnium has no known natural environmental cycle. Any atoms formed in laboratories decay rapidly and are produced in quantities too small to create measurable environmental concentrations. Its environmental chemistry, mobility, and biological uptake have not been directly observed in bulk systems. If released from an experiment, its significance would be local and radiological, governed mainly by decay and containment of associated radioactive materials.
Dubnium has no commodity market, no industrial supply chain, and no role in trade or recycling. Production is limited to specialized heavy-ion accelerator experiments, typically by bombarding actinide or heavy-element targets with lighter ions and separating a few atoms from intense backgrounds. The limiting factors are accelerator time, target preparation, detection efficiency, and isotope half-life, not ore availability or conventional refining cost. Substitution is not relevant because its only use is as a research subject.
Made by bombarding californium-249 with a beam of nitrogen-15
Dubnium is not expected to occur naturally in detectable amounts in the universe because all known isotopes are too short-lived to survive since nucleosynthesis events. It may be formed transiently in extreme neutron-rich environments or in artificial nuclear reactions, but no extraterrestrial reservoir is known. Its cosmic abundance is effectively zero for practical purposes.
- Dubnium was named for Dubna, the Russian research center associated with early transactinide work.
- Its chemistry must often be completed in seconds or less after an atom is created.
- The longest-lived known dubnium isotopes still have half-lives far too short for stockpiling.
- Dubnium sits in group 5, but it cannot be studied by ordinary beaker-scale chemistry.
- Single-atom experiments compare where a dubnium atom travels, deposits, or elutes before it decays.
Hình ảnh
Tính chất
Vật lý
- Bán kính nguyên tử (thực nghiệm)
- 139 pm So sánh Bán kính nguyên tử (thực nghiệm) của tất cả nguyên tố →
- Khối lượng riêng
- 2,93 × 104 kg/m³ So sánh Khối lượng riêng của tất cả nguyên tố →
Hóa học
- Ái lực electron
- 0,56 eV
- Năng lượng ion hóa (lần 1)
- 6,8 eV So sánh Năng lượng ion hóa (lần 1) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 2)
- 14,000048 eV So sánh Năng lượng ion hóa (lần 2) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 3)
- 23,10008 eV So sánh Năng lượng ion hóa (lần 3) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 4)
- 33,000114 eV So sánh Năng lượng ion hóa (lần 4) của tất cả nguyên tố →
- Năng lượng ion hóa (lần 5)
- 43,000148 eV So sánh Năng lượng ion hóa (lần 5) của tất cả nguyên tố →
- Trạng thái oxi hóa
- +3, +4, +5 So sánh Trạng thái oxi hóa của tất cả nguyên tố →
- Electron hóa trị
- 5 So sánh Electron hóa trị của tất cả nguyên tố →
- Cấu hình electron
- [Rn] 7s2 5f14 6d3
Nhiệt động lực học
Không có
Hạt nhân
- Proton
- 105 So sánh Proton của tất cả nguyên tố →
- Neutron
- 163 So sánh Neutron của tất cả nguyên tố →
- Các đồng vị đã biết
- 16 So sánh Các đồng vị đã biết của tất cả nguyên tố →
- Đồng vị bền
- 0 So sánh Đồng vị bền của tất cả nguyên tố →
- Số khối (đồng vị bền nhất)
- 268
- Đồng vị bền nhất
- Db-268
- Năm phát hiện
- 1967
Độ phổ biến
Không có
Cấu trúc tinh thể
Không có
Cấu trúc electron
- Số electron trong mỗi lớp
- 2, 8, 18, 32, 32, 11, 2 So sánh Số electron trong mỗi lớp của tất cả nguyên tố →
Mã định danh
- Số CAS
- 53850-35-4 So sánh Số CAS của tất cả nguyên tố →
- Ký hiệu số hạng
- 4F3/2
- InChI
- InChI=1S/Db
- Khóa InChI
- PUKKTGLVJQVIOF-UHFFFAOYSA-N
Cấu hình electron Dự đoán
Db: 5f¹⁴ 6d³ 7s²[Rn] 5f¹⁴ 6d³ 7s²1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p⁶ 5f¹⁴ 6d³ 7s²Mô hình nguyên tử
Các đồng vị khác nhau về số neutron, khối lượng và độ bền — không khác nhau về cấu hình electron của nguyên tử trung hòa.
Mô hình nguyên tử minh họa, không theo tỷ lệ.
Dấu vân tay nguyên tử
Phổ phát xạ / hấp thụ
Phân bố đồng vị
Không có đồng vị bền.
| Số khối | Khối lượng nguyên tử (u) | Độ phổ biến tự nhiên | Chu kỳ bán rã |
|---|---|---|---|
| 259 Phóng xạ | 259,109492 ± 0,000057 | Không có | 510 ms |
| 266 Phóng xạ | 266,12103 ± 0,0003 | Không có | 80 phút |
| 255 Phóng xạ | 255,10707 ± 0,00045 | Không có | 54 ms |
| 262 Phóng xạ | 262,11407 ± 0,00015 | Không có | 34 giây |
| 263 Phóng xạ | 263,11499 ± 0,00018 | Không có | 29 giây |
Pha / Trạng thái
Không có dữ liệu pha/trạng thái
Phổ nguyên tử
Đang hiển thị 10 trên 94. Sắp xếp theo điện tích ion (tăng dần).
Dữ liệu mức năng lượng ?
| Ion | Điện tích | Mức năng lượng |
|---|---|---|
| Db I | 0 | 2 |
| Db II | +1 | 2 |
| Db III | +2 | 2 |
| Db IV | +3 | 2 |
| Db V | +4 | 2 |
| Db VI | +5 | 2 |
| Db VII | +6 | 2 |
| Db VIII | +7 | 2 |
| Db IX | +8 | 2 |
| Db X | +9 | 2 |
Không có dữ liệu pha/trạng thái
Hợp chất
Đồng vị (5)
In October 1971, it was announced that two new isotopes of element 105 were synthesized with the heavy ion linear accelerator by A. Ghiorso and co-workers a Berkeley. Element 261105 was produced both by bombarding 250Cf with 15N and by bombarding 249Bk with 16O. The isotope emits 8.93-MeV alpha particles and decays to 257Lr with a half-life of about 1.8 s. Element 262105 was produced by bombarding 249Bk with 18O. It emits 8.45 MeV alpha particles and decays to 258Lr with a half-life of about 40 s. Seven isotopes of element 105 (unnilpentium) are now recognized.
| Số khối | Khối lượng nguyên tử (u) | Độ phổ biến tự nhiên | Chu kỳ bán rã | Kiểu phân rã | |
|---|---|---|---|---|---|
| 259 Phóng xạ | 259,109492 ± 0,000057 | Không có | 510 ms | α =100% | |
| 266 Phóng xạ | 266,12103 ± 0,0003 | Không có | 80 phút | α ?SF =?β+ ? | |
| 255 Phóng xạ | 255,10707 ± 0,00045 | Không có | 54 ms | SF ≈67%α ? | |
| 262 Phóng xạ | 262,11407 ± 0,00015 | Không có | 34 giây | SF =52±0.4%α =48±0.4%β+ ? | |
| 263 Phóng xạ | 263,11499 ± 0,00018 | Không có | 29 giây | SF =56±1.4%α =37±1.4%β+ =6.9±1.6% |
Tính chất mở rộng
Bán kính cộng hóa trị (mở rộng)
- Bán kính cộng hóa trị (Pyykkö)
- 149 pm
- Bán kính cộng hóa trị (Pyykkö, liên kết đôi)
- 136 pm
- Bán kính cộng hóa trị (Pyykkö, liên kết ba)
- 126 pm
Các thang đánh số
- Mendeleev
- 50
Độ phân cực hóa và tán sắc
- Độ phân cực hóa lưỡng cực
- 42 a.u.
- Độ phân cực hóa lưỡng cực (độ không đảm bảo)
- 4 a.u.
Phân loại trạng thái oxi hóa
Dữ liệu tham khảo chuyên sâu
Các kiểu phân rã đồng vị (35)
| Đồng vị | Chế độ | Cường độ |
|---|---|---|
| 255 | SF | 67% |
| 255 | A | — |
| 256 | A | 70% |
| 256 | B+ | 30% |
| 256 | SF | — |
| 257 | A | 94% |
| 257 | SF | 6% |
| 257 | B+ | — |
| 258 | A | 64% |
| 258 | B+ | 36% |
Dữ liệu bổ sung
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
Not Applicable
Tài liệu tham khảo (1)
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
Not Applicable
Tài liệu tham khảo (1)
Tài liệu tham khảo
(8)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Dubnium.
