Dysprosium (Dy)
lanthanideSolid
Standart Atom Ağırlığı
162,5 uElektron dizilimi
[Xe] 6s2 4f10Erime noktası
1411,85 °CKaynama noktası
2566,85 °CYoğunluk
8550 kg/m³Yükseltgenme basamakları
0, +1, +2, +3, +4Elektronegatiflik (Pauling)
1,22İyonlaşma enerjisi (1.)
5,939061 eVKeşif yılı
1878Atom yarıçapı
175 pmAyrıntılar
Dysprosium is a heavy lanthanide metal with atomic number 66. In compounds it is overwhelmingly trivalent, forming pale salts whose chemistry resembles that of neighboring rare earths. Its technological importance comes from an unusually large magnetic moment and strong magnetic anisotropy, especially when incorporated into high-performance permanent magnets. Natural dysprosium is a mixture of stable isotopes and is obtained with other rare earth elements rather than as a native metal.
The element has a metallic, bright silver luster. It is relatively stable in air at room temperature, and is readily attacked and dissolved by dilute and concentrated mineral acids, to evolve hydrogen. The metal is soft enough to be cut with a knife and can be machined without sparking if overheating is avoided. Small amounts of impurities can greatly affect its physical properties.
The name derives from the Greek dysprositos for "hard to get at", owing to the difficulty in separating this rare earth element from a holmium mineral in which it was found. It was discovered by the Swiss chemist Marc Delafontaine in the mineral samarskite in 1878 and called philippia. Philippia was subsequently thought to be a mixture of terbium and yttrium. It was later rediscovered in a holmium sample by the French chemist Paul-Emile Lecoq de Boisbaudran in 1886, who was then credited with the discovery. Dysprosium was first isolated by the French chemist Georges Urbain in 1906.
Dysprosium was discovered by Paul-Émile Lecoq de Boisbaudran, a French chemist, in 1886 as an impurity in erbia, the oxide of erbium. The metal was isolated by Georges Urbain, another French chemist, in 1906. Pure samples of dysprosium were first produced in the 1950s. Today, dysprosium is primarily obtained through an ion exchange process from monazite sand ((Ce, La, Th, Nd, Y)PO4), a material rich in rare earth elements.
From the Greek word dysprositos, meaning hard to get at. Dysprosium was discovered in 1886 by Lecoq de Boisbaudran, but not isolated. Neither the oxide nor the metal was available in relatively pure form until 1950, when the development of ion-exchange separation and metallographic reduction techniques were created by Spedding and associates. Dysprosium occurs along with other so-called rare-earth or lanthanide elements in a variety of minerals such as xenotime, fergusonite, gadolinite, euxenite, polycrase, and blomstrandine. The most important sources, however, are from monaziate and bastnasite. Dysprosium can be prepared by reduction of the trifluoride with calcium.
Pure dysprosium is a bright, silvery metal when freshly cut, but it slowly tarnishes in air. It is relatively soft and can be machined, though the metal is reactive enough that clean surfaces require protection. At ordinary temperature it is paramagnetic; it develops more ordered magnetic states only at low temperatures.
The largest practical use of dysprosium is as an additive to neodymium-iron-boron permanent magnets, where it improves resistance to demagnetization at elevated temperature. This is important in traction motors, wind-turbine generators, and compact actuators, although manufacturers try to minimize the amount used because supply is constrained. Dysprosium is also used in Terfenol-D magnetostrictive alloy, in some specialty lighting and laser materials, and as neutron-absorbing material in selected nuclear-technology applications.
There are no commercial applications for dysprosium. Since it easily absorbs neutrons and has a high melting point, dysprosium might be alloyed with steel for use in nuclear reactors. When combined with vanadium and other rare earth elements, dysprosium is used as a laser material.
Dysprosium oxide (Dy2O3), also known as dysprosia, is combined with nickel and added to a special cement used to cool nuclear reactor rods. Other dysprosium compounds include: dysprosium fluoride (DyF3), dysprosium iodide (DyI3) and dysprosium sulfate (Dy2(SO4)3).
While we have not found many applications for dysprosium, its thermal neutron absorption cross-section and high melting point suggest metallurgical uses in nuclear control applications and for alloying with special stainless steels. A dysprosium oxide-nickel cement has found use in cooling nuclear reactor rods. This cement absorbs neutrons readily without swelling or contracting under prolonged neutron bombardment. In combination with vanadium and other rare earths, dysprosium has been used in making laser materials. Dysprosium-cadmium chalcogenides, as sources of infrared radiation, have been used for studying chemical reactions.
Isotopes in Industry
The isotopes of dysprosium are highly magnetic and have been the subject of physics research involving interactions of isotopes and the structure of lattice supersolids (spatially ordered material with superfluid properties, i.e. zero viscosity). The Magneto-Optical Trapping (MOT) chamber is used for slowing atoms (isotopes) to study the physics of neutral atoms by using a laser light to cool atoms (“Doppler cooling”) and magnetic quadrupole fields to slow and “trap” the neutral atoms (Fig. IUPAC.66.1) [462] S. H. Youn, M. Lu, U. Ray, B. L. Lev. Am. Phys. Soc. Phys. Rev. A.82, 043425 (2010). https://doi.org/10.1103/PhysRevA.82.043425., [463] C. M. Elliott. First Dysprosium MOT, Physics Illinois-University of Illinois at Urbana-Champaign (2017), Feb. 28; http://engineering.illinois.edu/news/article/2009-07-31-first-dysprosium-mot..
164Dy has a large neutron absorption cross section, so dysprosium is used for control rods [464] V. E. Ceron, J. G. Hirsch. Phys. Lett. B471, 1 (1999).. 161Dy has been a key isotope for studying the Mössbauer Effect, which is the resonance and absorption of gamma ray emissions on nearby atoms in a solid state [465] R. L. Cohen. Phys. Rev.137, 1809 (1965)..
Isotopes in Medicine
165Dy (with a half-life of 140 min) is commonly used in arthritis therapy (radiosynovectomy). Rheumatic inflammation of the membranes of joints is often treated by the injection of 165Dy-ferric oxide directly into the joint space of the knee. Leakage from the joint has been shown to be minimal [467] C. B. Sledge, J. D. Zuckerman, M. R. Zalutsky, R. W. Atcher, S. Shortkroff, D. R. Lionberger, H. A. Rose, B. J. Hurson, P. A. Lankenner, R. J. Anderson, W. A. Bloomer. Arthritis Rheum.29, 153 (1986)..
Isotopes Used as a Source of Radioactive Isotope(s)
164Dy is used to produce 166Dy (with a half-life of 3.4 days) via double neutron capture [468] D. Ma, A. R. Ketring, G. J. Ehrhardt, W. Jia. J. Radioanal. Nucl. Chem.206, 119 (1996)., [469] S. Mirzadeh, R. E. Schenter, A. P. Callahan, F. F. Knapp. Production Capabilities in U.S. Nuclear Reactors for Medical Radioisotopes, Tm-12010, Oak Ridge National Laboratory Oak Ridge, Tenn (1992)., [470] S. Lahiri, K. J. Volkers, B. Wierczinski. Appl. Radiat. Isot.61, 1157 (2004).. 166Dy, which decays to 166Ho, is used in cancer and arthritis therapy [468] D. Ma, A. R. Ketring, G. J. Ehrhardt, W. Jia. J. Radioanal. Nucl. Chem.206, 119 (1996)., [471] G. Ferro-Flores, O. Hernandez-Oviedo, C. Arteaga de Murphy, J. I. Tendilla, F. Monroy-Guzman, M. Pedraza-Lopez, K. Aldama-Alvarado. Appl. Radiat. Isot.61, 1227 (2004)..
Dysprosium chemistry is dominated by the +3 oxidation state, represented by dysprosium(III) oxide, Dy₂O₃, dysprosium(III) chloride, DyCl₃, and many hydrated salts. The Dy³⁺ ion is strongly paramagnetic because of its 4f electrons, which are shielded enough to give sharp optical transitions in some host crystals. Dysprosium(II) compounds are uncommon and require strongly reducing conditions; +4 chemistry is not a normal feature of dysprosium. Many minerals contain dysprosium only as a minor component substituting for other heavy rare earth ions.
See more information at the Dysprosium compound page.
Dysprosium metal dust and filings can burn, and the metal reacts slowly with moisture to form hydrogen, H₂, and hydroxides or oxides. Soluble dysprosium salts should be handled as toxicologically uncertain rare-earth compounds rather than as harmless materials; ingestion or inhalation of dust is undesirable. Natural dysprosium is not significantly radioactive, but activated dysprosium isotopes can present radiation hazards in nuclear settings.
Dysprosium occurs dispersed in minerals such as xenotime and ion-adsorption clays, where it substitutes for other trivalent rare earth elements. Weathering and processing can mobilize rare-earth ions, but dysprosium generally has low solubility in neutral to alkaline waters because it forms insoluble phosphates, carbonates, and hydroxides. It has no known biological function. Environmental concern is usually tied to mining, acid leaching, and waste management rather than to natural background concentrations.
Dysprosium is produced as a separated rare earth from mixed ores and concentrates, not from dedicated dysprosium minerals. The main industrial challenge is separation from chemically similar lanthanides by solvent extraction or ion-exchange processes. Demand is strongly linked to high-temperature permanent magnets, while supply is limited by the availability of heavy rare-earth feedstocks. Recycling from magnets is technically possible and increasingly important, but collection, separation, and alloy complexity limit recovery. Substitution strategies include reducing dysprosium content, using grain-boundary diffusion, or redesigning motors to need less coercivity.
Usually found with erbium, holmium and other rare earths in some minerals such as monazite sand, which is often 50% rare earth by weight.
Dysprosium is a rare cosmic element. Its stable isotopes are produced mainly by slow and rapid neutron-capture processes in evolved stars and explosive stellar environments, then incorporated into interstellar dust and later planetary materials. In the Solar System it is concentrated with other refractory rare earths in silicate and phosphate phases rather than in metallic cores or volatile reservoirs.
- The name dysprosium comes from a Greek word meaning “hard to get at,” reflecting its difficult separation from other lan
- Dysprosium has one of the highest thermal-neutron absorption cross sections among stable elements.
- A small dysprosium addition can greatly raise the coercivity of Nd₂Fe₁₄B-based magnets.
- The isotope ¹⁶⁴Dy is the most abundant naturally occurring dysprosium isotope.
- Dysprosium metal can be cut with ordinary tools, but fresh surfaces tarnish readily.
Görseller
Özellikler
Fiziksel
- Atom yarıçapı (ampirik)
- 175 pm Tüm elementlerin Atom yarıçapı (ampirik) değerlerini karşılaştır →
- Kovalent yarıçap
- 192 pm Tüm elementlerin Kovalent yarıçap değerlerini karşılaştır →
- Van der Waals yarıçapı
- 229 pm Tüm elementlerin Van der Waals yarıçapı değerlerini karşılaştır →
- Yoğunluk
- 8550 kg/m³ Tüm elementlerin Yoğunluk değerlerini karşılaştır →
- Molar hacim
- 0,019 L/mol
- STP'deki faz
- Katı Tüm elementlerin STP'deki faz değerlerini karşılaştır →
- Erime noktası
- 1411,85 °C Tüm elementlerin Erime noktası değerlerini karşılaştır →
- Kaynama noktası
- 2566,85 °C Tüm elementlerin Kaynama noktası değerlerini karşılaştır →
- Isıl iletkenlik
- 10,7 W/(m·K) Tüm elementlerin Isıl iletkenlik değerlerini karşılaştır →
- Özgül ısı kapasitesi
- 0,173 J/(g·K) Tüm elementlerin Özgül ısı kapasitesi değerlerini karşılaştır →
- Molar ısı kapasitesi
- 28,16 J/(mol·K) Tüm elementlerin Molar ısı kapasitesi değerlerini karşılaştır →
- Kristal yapı
- Hekzagonal sıkı paket Tüm elementlerin Kristal yapı değerlerini karşılaştır →
Kimyasal
- Elektronegatiflik (Pauling)
- 1,22 Tüm elementlerin Elektronegatiflik (Pauling) değerlerini karşılaştır →
- Elektron ilgisi
- 0,352 eV
- İyonlaşma enerjisi (1.)
- 5,939061 eV Tüm elementlerin İyonlaşma enerjisi (1.) değerlerini karşılaştır →
- İyonlaşma enerjisi (2.)
- 11,64704 eV Tüm elementlerin İyonlaşma enerjisi (2.) değerlerini karşılaştır →
- İyonlaşma enerjisi (3.)
- 22,890079 eV Tüm elementlerin İyonlaşma enerjisi (3.) değerlerini karşılaştır →
- İyonlaşma enerjisi (4.)
- 41,230142 eV Tüm elementlerin İyonlaşma enerjisi (4.) değerlerini karşılaştır →
- İyonlaşma enerjisi (5.)
- 62,100214 eV Tüm elementlerin İyonlaşma enerjisi (5.) değerlerini karşılaştır →
- Yükseltgenme basamakları
- 0, +1, +2, +3, +4 Tüm elementlerin Yükseltgenme basamakları değerlerini karşılaştır →
- Değerlik elektronları
- 3 Tüm elementlerin Değerlik elektronları değerlerini karşılaştır →
- Elektron dizilimi
- [Xe] 6s2 4f10
Termodinamik
- Erime ısısı
- 0,11504379 eV Tüm elementlerin Erime ısısı değerlerini karşılaştır →
- Buharlaşma ısısı
- 2,38379 eV Tüm elementlerin Buharlaşma ısısı değerlerini karşılaştır →
- Süblimleşme ısısı
- 3,016013 eV
- Atomlaşma ısısı
- 3,016013 eV
- Atomlaşma entalpisi
- 3,009794 eV
Nükleer
- Protonlar
- 66 Tüm elementlerin Protonlar değerlerini karşılaştır →
- Nötronlar
- 98 Tüm elementlerin Nötronlar değerlerini karşılaştır →
- Bilinen izotoplar
- 39 Tüm elementlerin Bilinen izotoplar değerlerini karşılaştır →
- Kararlı izotoplar
- 6 Tüm elementlerin Kararlı izotoplar değerlerini karşılaştır →
- En kararlı izotop
- Dy-164
- Keşif yılı
- 1878
Bolluk
- Bolluk (yer kabuğu)
- 5,2 mg/kg Tüm elementlerin Bolluk (yer kabuğu) değerlerini karşılaştır →
- Bolluk (okyanus)
- 9,1 × 10−7 mg/L Tüm elementlerin Bolluk (okyanus) değerlerini karşılaştır →
Kristal Yapı
- Örgü sabiti a
- 359 pm
Elektronik Yapı
- Kabuk başına elektron sayısı
- 2, 8, 18, 28, 8, 2 Tüm elementlerin Kabuk başına elektron sayısı değerlerini karşılaştır →
Tanımlayıcılar
- CAS numarası
- 7429-91-6 Tüm elementlerin CAS numarası değerlerini karşılaştır →
- Terim simgesi
- 5I8
- InChI
- InChI=1S/Dy
- InChI Anahtarı
- KBQHZAAAGSGFKK-UHFFFAOYSA-N
Elektron Dizilimi Ölçülmüş
Dy: 4f¹⁰ 6s²[Xe] 4f¹⁰ 6s²1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁰ 6s²Atom modeli
İzotoplar nötron sayısını, kütleyi ve kararlılığı değiştirir; nötr bir atomun elektron dizilimini değiştirmez.
Şematik atom modeli, ölçekli değildir.
Atomik Parmak İzi
Emisyon / Soğurma Spektrumu
İzotop Dağılımı
| Kütle numarası | Atom kütlesi (u) | Doğal bolluk | Yarı ömür |
|---|---|---|---|
| 158 Kararlı | 157,9244159 ± 0,0000031 | 0,0950% | Kararlı |
| 160 Kararlı | 159,9252046 ± 0,000002 | 2,3290% | Kararlı |
| 161 Kararlı | 160,9269405 ± 0,000002 | 18,8890% | Kararlı |
| 162 Kararlı | 161,9268056 ± 0,000002 | 25,4750% | Kararlı |
| 163 Kararlı | 162,9287383 ± 0,000002 | 24,8960% | Kararlı |
| 164 Kararlı | 163,9291819 ± 0,000002 | 28,2600% | Kararlı |
Faz / Hâl
Neden: erime noktasının (1411,85 °C) 1386,8 °C altında
Şematik, ölçekli değil
Faz geçiş noktaları
Geçiş enerjileri
Erime noktasında 1 mol maddeyi eritmek için gereken enerji
Kaynama noktasında 1 mol maddeyi buharlaştırmak için gereken enerji
Süblimleşme noktasında 1 mol maddeyi süblimleştirmek için gereken enerji
Yoğunluk
Standart koşullarda
Standart koşullarda
Atomik Spektrumlar
66 kayıttan 10 tanesi gösteriliyor. İyon yüküne göre sıralandı (artan).
Spektral Çizgi Kayıtları ?
| İyon | Yük | Toplam çizgi sayısı | Geçiş olasılıkları | Düzey gösterimleri |
|---|---|---|---|---|
| Dy I | 0 | 230 | 73 | 73 |
| Dy II | +1 | 421 | 17 | 17 |
Enerji Düzeyi Kayıtları ?
| İyon | Yük | Düzeyler |
|---|---|---|
| Dy I | 0 | 740 |
| Dy II | +1 | 576 |
| Dy III | +2 | 2 |
| Dy IV | +3 | 13 |
| Dy V | +4 | 2 |
| Dy VI | +5 | 2 |
| Dy VII | +6 | 2 |
| Dy VIII | +7 | 2 |
| Dy IX | +8 | 2 |
| Dy X | +9 | 2 |
İyon Yarıçapları
| Yük | Koordinasyon | Spin | Yarıçap |
|---|---|---|---|
| +2 | 6 | Mevcut değil | 107 pm |
| +2 | 7 | Mevcut değil | 112.99999999999999 pm |
| +2 | 8 | Mevcut değil | 119 pm |
| +3 | 6 | Mevcut değil | 91.2 pm |
| +3 | 7 | Mevcut değil | 97 pm |
| +3 | 8 | Mevcut değil | 102.69999999999999 pm |
| +3 | 9 | Mevcut değil | 108.3 pm |
Bileşikler
İzotoplar (6)
| Kütle numarası | Atom kütlesi (u) | Doğal bolluk | Yarı ömür | Bozunma türü | |
|---|---|---|---|---|---|
| 158 Kararlı | 157,9244159 ± 0,0000031 | 0,0950% ± 0,0030% | Kararlı | stable | |
| 160 Kararlı | 159,9252046 ± 0,000002 | 2,3290% ± 0,0180% | Kararlı | stable | |
| 161 Kararlı | 160,9269405 ± 0,000002 | 18,8890% ± 0,0420% | Kararlı | stable | |
| 162 Kararlı | 161,9268056 ± 0,000002 | 25,4750% ± 0,0360% | Kararlı | stable | |
| 163 Kararlı | 162,9287383 ± 0,000002 | 24,8960% ± 0,0420% | Kararlı | stable | |
| 164 Kararlı | 163,9291819 ± 0,000002 | 28,2600% ± 0,0540% | Kararlı | stable |
Genişletilmiş Özellikler
Kovalent Yarıçaplar (Genişletilmiş)
- Kovalent yarıçap (Pyykkö)
- 167 pm
- Kovalent yarıçap (Pyykkö, çift bağ)
- 133 pm
Van der Waals Yarıçapları
- Alvarez
- 287 pm
- UFF
- 342,8 pm
- MM3
- 290 pm
Atom ve Metalik Yarıçaplar
- Atom yarıçapı (Rahm)
- 275 pm
Numaralandırma Ölçekleri
- Mendeleev
- 31
- Pettifor
- 25
- Glawe
- 24
Elektronegatiflik Ölçekleri
- Ghosh
- 0
- Miedema
- 3
- Gunnarsson–Lundqvist
- 5
- Robles–Bartolotti
- 4
Kutuplanabilirlik ve Dispersiyon
- Dipol kutuplanabilirliği
- 163 a.u.
- Dipol kutuplanabilirliği (belirsizlik)
- 15 a.u.
- C₆ (Gould–Bučko)
- 2430 Ha·Bohr6
Miedema Parametreleri
- Miedema molar hacmi
- 19 cm3/mol
- Miedema elektron yoğunluğu
- 2
Tedarik Riski ve Ekonomi
- Üretim yoğunlaşması
- 97
- Göreli tedarik riski
- 10
- Rezerv dağılımı
- 50
- Siyasi istikrar (en büyük üretici)
- 24
- Siyasi istikrar (en büyük rezerv sahibi)
- 24
Faz Geçişleri ve Allotroplar
| Erime noktası | 1685,15 K |
| Kaynama noktası | 2840,15 K |
Yükseltgenme Basamağı Kategorileri
İleri Düzey Referans Verileri
Perdeleme Sabitleri (13)
| n | Orbital | σ |
|---|---|---|
| 1 | s | 1,2914 |
| 2 | p | 4,3204 |
| 2 | s | 17,2906 |
| 3 | d | 13,6701 |
| 3 | p | 20,1195 |
| 3 | s | 20,6067 |
| 4 | d | 34,982 |
| 4 | f | 39,464 |
| 4 | p | 32,174 |
| 4 | s | 31,408 |
Kristal Yarıçaplarının Ayrıntıları (7)
| Yük | CN | Spin | rcrystal (pm) | Köken |
|---|---|---|---|---|
| 2 | VI | 121 | ||
| 2 | VII | 127 | ||
| 2 | VIII | 133 | ||
| 3 | VI | 105,2 | from r^3 vs V plots, | |
| 3 | VII | 111 | ||
| 3 | VIII | 116,7 | from r^3 vs V plots, | |
| 3 | IX | 122,3 | from r^3 vs V plots, |
İzotop Bozunma Türleri (56)
| İzotop | Mod | Şiddet |
|---|---|---|
| 138 | B+ | — |
| 138 | B+p | — |
| 139 | B+ | 100% |
| 139 | B+p | 11% |
| 140 | B+ | — |
| 140 | B+p | — |
| 141 | B+ | 100% |
| 141 | B+p | — |
| 142 | B+ | 100% |
| 142 | e+ | 90% |
X Işını Saçılma Faktörleri (514)
| Enerji (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 0,15635 |
| 10,1617 | — | 0,1621 |
| 10,3261 | — | 0,16806 |
| 10,4931 | — | 0,17425 |
| 10,6628 | — | 0,18066 |
| 10,8353 | — | 0,18731 |
| 11,0106 | — | 0,19421 |
| 11,1886 | — | 0,20135 |
| 11,3696 | — | 0,20876 |
| 11,5535 | — | 0,21654 |
Ek Veriler
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
5.2 milligrams per kilogram
Kaynaklar (1)
- [5] Dysprosium https://education.jlab.org/itselemental/ele066.html
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
9.1×10-7 milligrams per liter
Kaynaklar (1)
- [5] Dysprosium https://education.jlab.org/itselemental/ele066.html
Kaynaklar
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Dysprosium.
The element property data was retrieved from publications.