Titanium (Ti)
transition-metalSolid
Standart Atom Ağırlığı
47,867 uElektron dizilimi
[Ar] 4s2 3d2Erime noktası
1667,85 °CKaynama noktası
3286,85 °CYoğunluk
4500 kg/m³Yükseltgenme basamakları
−2, −1, 0, +1, +2, +3, +4Elektronegatiflik (Pauling)
1,54İyonlaşma enerjisi (1.)
6,82812 eVKeşif yılı
1791Atom yarıçapı
140 pmAyrıntılar
Titanium is a light, strong transition metal with a high melting point and exceptional resistance to corrosion in many natural and industrial environments. Its chemistry is dominated by the +4 oxidation state, although +3 and lower states occur in specialized compounds. The metal is abundant in Earth’s crust but is rarely found in concentrated metallic form because it bonds strongly to oxygen and nitrogen. Its combination of low density, strength, and passivation makes it important in aerospace, chemical equipment, pigments, and medical materials.
Titanium, when pure, is a lustrous, white metal. It has a low density, good strength, is easily fabricated, and has excellent corrosion resistance. It is ductile only when it is free of oxygen. The metal, which burns in air, is the only element that burns in nitrogen.
Titanium is resistant to dilute sulfuric and hydrochloric acid, most organic acids, most chlorine gas, and chloride solutions.
Natural titanium is reported to become very radioactive after bombardment with deuterons. The emitted radiations are mostly positrons and hard gamma rays. The metal is dimorphic. The hexagonal alpha form changes to the cubic beta form very slowly at about 880°C. The metal combines with oxygen at red heat, and with chlorine at 550°C.
Titanium metal is considered to be physiologically inert. When pure, titanium dioxide is relatively clear and has an extremely high index of refraction with an optical dispersion higher than diamond.
The name derives from the Latin titans, who were the mythological "first sons of the earth". It was originally discovered by the English clergyman William Gregor in the mineral ilmenite (FeTiO3) in 1791. He called this mineral menachanite and the element menachin, for the Menachan parish where it was found. It was rediscovered in 1795 by the German chemist Martin Heinrich Klaproth, who called it titanium because it had no characteristic properties to use as a name. Titanium metal was first isolated by the Swedish chemists Sven Otto Pettersson and Lars Fredrik Nilson.
Titanium was discovered in 1791 by the Reverend William Gregor, an English pastor. Pure titanium was first produced by Matthew A. Hunter, an American metallurgist, in 1910. Titanium is the ninth most abundant element in the earth's crust and is primarily found in the minerals rutile (TiO2), ilmenite (FeTiO3) and sphene (CaTiSiO5). Titanium makes up about 0.57% of the earth's crust.
From the Latin titans, the first sons of the Earth, Greek mythology.
Discovered by Gregor in 1791; named by Klaproth in 1795. Impure titanium was prepared by Nilson and Pettersson in 1887; however, the pure metal (99.9%) was not made until 1910 when Hunter heated TiCl4 with sodium in a steel bomb.
Pure titanium is a silvery gray metal. It is ductile when sufficiently pure, but interstitial oxygen, nitrogen, carbon, or hydrogen can harden and embrittle it. At ordinary temperatures it is protected by a thin, adherent oxide film that reforms rapidly after scratching in air or water.
Most titanium mined is not converted to metal but to titanium dioxide, TiO₂, a white pigment used in paints, plastics, paper, inks, ceramics, and sunscreens. Metallic titanium and its alloys are used where high strength-to-weight ratio and corrosion resistance justify the cost, including aircraft structures, jet-engine parts, marine hardware, heat exchangers, and chemical-process equipment. Biocompatible titanium alloys are used for dental and orthopedic implants. Titanium is also used in some sporting goods, architecture, and as a getter or alloying addition in metallurgy.
Titanium is a strong, light metal. It is as strong as steel and twice as strong as aluminum, but is 45% lighter than steel and only 60% heavier than aluminum. Titanium is not easily corroded by sea water and is used in propeller shafts, rigging and other parts of boats that are exposed to sea water. Titanium and titanium alloys are used in airplanes, missiles and rockets where strength, low weight and resistance to high temperatures are important. Since titanium does not react within the human body, it is used to create artificial hips, pins for setting bones and for other biological implants. Unfortunately, the high cost of titanium has limited its widespread use.
Titanium oxide (TiO2) is used as a pigment to create white paint and accounts for the largest use of the element. Pure titanium oxide is relatively clear and is used to create titania, an artificial gemstone. Titanium tetrachloride (TiCl4), another titanium compound, has been used to make smoke screens.
A final bit of titanium trivia titanium is one of the few elements that will burn in an atmosphere of pure nitrogen.
Titanium is important as an alloying agent with aluminum, molybdenum, manganese, iron, and other metals. Alloys of titanium are principally used for aircraft and missiles where lightweight strength and ability to withstand extremes of temperature are important.
Titanium is as strong as steel, but 45% lighter. It is 60% heavier than aluminum, but twice as strong.
Titanium has potential use in desalination plants for converting sea water into fresh water. The metal has excellent resistance to sea water and is used for propeller shafts, rigging, and other parts of ships exposed to salt water. A titanium anode coated with platinum has been used to provide cathodic protection from corrosion by salt water.
It is produced artificially for use as a gemstone, but it is relatively soft. Star sapphires and rubies exhibit their asterism as a result of the presence of TiO2.
Titanium dioxide is extensively used for both house paint and artist's paint, because it is permanent and has good covering power. Titanium oxide pigment accounts for the largest use of the element. Titanium paint is an excellent reflector of infrared, and is extensively used in solar observatories where heat causes poor viewing conditions.
Titanium tetrachloride is used to iridize glass. This compound fumes strongly in air and has been used to produce smoke screens.
Isotopes in Earth/Planetary Science
The isotope-amount ratio n(50Ti)/n(46Ti) is used to study the early history of the Solar System. The value of the ratio can help determine whether the Solar System was created from a well-homogenized source [197] I. Leya, M. Schönbächler, U. Krähenbühl, A. N. Halliday. Astrophys. J.702, 1118 (2009)., [198] R. Courtland. Titanium Reveals Explosive Origins of the Solar System, New Scientist (2014), Feb. 25; http://www.newscientist.com/article/dn16969-titanium-reveals-explosive-origins-of-the-solar-system.html.. For example, variations in titanium isotopic compositions of various groups of meteorites can be observed (Fig. IUPAC.22.1) [199] J. Zhang, N. Dauphas, A. M. Davis, A. Pourmand. J. Anal. At. Spectrom.26, 2197 (2011)..
Isotopes in Industry
The isotope-amount ratio n(48Ti)/n(49Ti) has been used in Isotope Ratio Method (IRM) analysis (initial titanium ratio/final titanium ratio) to estimate the energy production of nuclear reactors. This ratio can also be used to confirm that a reactor is being used for non-proliferation purposes (purposes other than to assist in the formation of nuclear weapon grade materials) [201] D. C. Gerlach, C. J. Gesh, D. E. Hurley, M. R. Mitchell, G. H. Meriwether, B. D. Reid. Final Report on Isotope Ratio Techniques for Light Water Reactors, PNNL-18573. U.S. Department of Energy (2009)..
Titanium forms stable oxides, halides, nitrides, carbides, and organometallic compounds. Titanium dioxide, TiO₂, occurs mainly as rutile, anatase, and brookite and is chemically durable and optically important. Titanium tetrachloride, TiCl₄, is a volatile liquid used in metal production and pigment processing; it fumes in moist air by hydrolysis. Titanium nitride, TiN, is a hard, gold-colored ceramic coating. Titanium carbide, TiC, is a very hard refractory material. In aqueous chemistry, Ti⁴⁺ hydrolyzes strongly, while Ti³⁺ compounds are reducing and less stable in air.
See more information at the Titanium compound page.
Massive titanium metal is generally of low toxicity and is widely used in implants, but fine powder, turnings, and dust can burn vigorously and may pose explosion hazards when dispersed. Hot titanium reacts readily with oxygen, nitrogen, and hydrogen. Titanium tetrachloride, TiCl₄, is highly corrosive and releases hydrogen chloride, HCl, on contact with moisture. Titanium dioxide, TiO₂, is chemically inert in many uses, but inhalation of respirable dust is controlled in occupational settings.
Titanium is a common lithophile element in rocks and soils, mostly locked in resistant oxide and silicate minerals. It has low biological availability because Ti⁴⁺ is strongly hydrolyzed and insoluble under many environmental conditions. Weathering can concentrate titanium minerals such as rutile and ilmenite in heavy-mineral sands. Titanium dioxide particles are persistent, and their environmental behavior depends on particle size, surface coating, and light exposure rather than simple dissolution.
Titanium supply is tied mainly to mineral feedstocks used for pigment production, especially ilmenite and rutile, rather than to metallic titanium demand. Metal production is energy- and process-intensive because titanium cannot be reduced easily from its oxide; the Kroll process converts titanium tetrachloride, TiCl₄, with magnesium to produce sponge metal. Alloy fabrication and machining are costly compared with steel or aluminum. Recycling of clean titanium scrap is important in aerospace and medical supply chains, while contaminated scrap is harder to reuse in high-grade alloys.
Titanium is present in meteorites and the sun. Rocks obtained during the Apollo 17 lunar mission showed presence of 12.1% TiO2; rocks obtained during earlier Apollo missions show lower percentages.
Titanium oxide bands are prominent in the spectra of M-type stars. The element is the ninth most abundant in the crust of the earth. Titanium is almost always present in igneous rocks and in the sediments derived from them.
It occurs in the minerals rutile, ilmenite, and sphene, and is present in titanates and in many iron ores. Titanium is present in ash of coal, in plants, and in human body.
The metal was a laboratory curiosity until Kroll, in 1946, showed that titanium could be produced commercially by reducing titanium tetrachloride with magnesium. This method is still largely used for producing the metal. The metal can be purified by decomposing the iodide.
Titanium is produced in massive stars and supernova environments by nuclear burning and related explosive nucleosynthesis. It is a minor but widely detected element in the Sun, meteorites, and many stellar spectra. In rocky planets it behaves as a refractory lithophile element and is incorporated into oxide and silicate minerals rather than metallic cores. Calcium-aluminum-rich inclusions in meteorites can contain titanium-bearing refractory phases.
- Titanium was named after the Titans of Greek mythology, not after the element’s strength.
- The metal’s useful corrosion resistance comes from a nanometer-scale TiO₂ film.
- Titanium can burn in nitrogen at high temperature, forming titanium nitride.
- Commercially pure titanium grades differ largely by controlled oxygen content.
- Titanium tetrachloride produces dense white fumes in humid air.
- Rutile TiO₂ has one of the highest refractive indices of common colorless solids.
Görseller
Özellikler
Fiziksel
- Atom yarıçapı (ampirik)
- 140 pm Tüm elementlerin Atom yarıçapı (ampirik) değerlerini karşılaştır →
- Kovalent yarıçap
- 160 pm Tüm elementlerin Kovalent yarıçap değerlerini karşılaştır →
- Van der Waals yarıçapı
- 187 pm Tüm elementlerin Van der Waals yarıçapı değerlerini karşılaştır →
- Metalik yarıçap
- 132 pm Tüm elementlerin Metalik yarıçap değerlerini karşılaştır →
- Yoğunluk
- 4500 kg/m³ Tüm elementlerin Yoğunluk değerlerini karşılaştır →
- Molar hacim
- 0,0106 L/mol
- STP'deki faz
- Katı Tüm elementlerin STP'deki faz değerlerini karşılaştır →
- Erime noktası
- 1667,85 °C Tüm elementlerin Erime noktası değerlerini karşılaştır →
- Kaynama noktası
- 3286,85 °C Tüm elementlerin Kaynama noktası değerlerini karşılaştır →
- Isıl iletkenlik
- 21,9 W/(m·K) Tüm elementlerin Isıl iletkenlik değerlerini karşılaştır →
- Özgül ısı kapasitesi
- 0,523 J/(g·K) Tüm elementlerin Özgül ısı kapasitesi değerlerini karşılaştır →
- Molar ısı kapasitesi
- 25,06 J/(mol·K) Tüm elementlerin Molar ısı kapasitesi değerlerini karşılaştır →
- Kristal yapı
- Hekzagonal sıkı paket Tüm elementlerin Kristal yapı değerlerini karşılaştır →
Kimyasal
- Elektronegatiflik (Pauling)
- 1,54 Tüm elementlerin Elektronegatiflik (Pauling) değerlerini karşılaştır →
- Elektronegatiflik (Allen)
- 1,38
- Elektron ilgisi
- 0,0755 eV
- İyonlaşma enerjisi (1.)
- 6,82812 eV Tüm elementlerin İyonlaşma enerjisi (1.) değerlerini karşılaştır →
- İyonlaşma enerjisi (2.)
- 13,575547 eV Tüm elementlerin İyonlaşma enerjisi (2.) değerlerini karşılaştır →
- İyonlaşma enerjisi (3.)
- 27,491805 eV Tüm elementlerin İyonlaşma enerjisi (3.) değerlerini karşılaştır →
- İyonlaşma enerjisi (4.)
- 43,267319 eV Tüm elementlerin İyonlaşma enerjisi (4.) değerlerini karşılaştır →
- İyonlaşma enerjisi (5.)
- 99,299342 eV Tüm elementlerin İyonlaşma enerjisi (5.) değerlerini karşılaştır →
- Yükseltgenme basamakları
- −2, −1, 0, +1, +2, +3, +4 Tüm elementlerin Yükseltgenme basamakları değerlerini karşılaştır →
- Değerlik elektronları
- 4 Tüm elementlerin Değerlik elektronları değerlerini karşılaştır →
- Elektron dizilimi
- [Ar] 4s2 3d2
Termodinamik
- Erime ısısı
- 0,14665492 eV Tüm elementlerin Erime ısısı değerlerini karşılaştır →
- Buharlaşma ısısı
- 4,40483 eV Tüm elementlerin Buharlaşma ısısı değerlerini karşılaştır →
- Süblimleşme ısısı
- 4,851531 eV
- Atomlaşma ısısı
- 4,851531 eV
- Atomlaşma entalpisi
- 4,902316 eV
Nükleer
- Protonlar
- 22 Tüm elementlerin Protonlar değerlerini karşılaştır →
- Nötronlar
- 26 Tüm elementlerin Nötronlar değerlerini karşılaştır →
- Bilinen izotoplar
- 29 Tüm elementlerin Bilinen izotoplar değerlerini karşılaştır →
- Kararlı izotoplar
- 5 Tüm elementlerin Kararlı izotoplar değerlerini karşılaştır →
- En kararlı izotop
- Ti-48
- Keşif yılı
- 1791
Bolluk
- Bolluk (yer kabuğu)
- 5650 mg/kg Tüm elementlerin Bolluk (yer kabuğu) değerlerini karşılaştır →
- Bolluk (okyanus)
- 0,001 mg/L Tüm elementlerin Bolluk (okyanus) değerlerini karşılaştır →
Kristal Yapı
- Örgü sabiti a
- 295 pm
Elektronik Yapı
- Kabuk başına elektron sayısı
- 2, 8, 10, 2 Tüm elementlerin Kabuk başına elektron sayısı değerlerini karşılaştır →
Tanımlayıcılar
- CAS numarası
- 7440-32-6 Tüm elementlerin CAS numarası değerlerini karşılaştır →
- Terim simgesi
- 3F2
- InChI
- InChI=1S/Ti
- InChI Anahtarı
- RTAQQCXQSZGOHL-UHFFFAOYSA-N
Elektron Dizilimi Ölçülmüş
Ti: 3d² 4s²[Ar] 3d² 4s²1s² 2s² 2p⁶ 3s² 3p⁶ 3d² 4s²Atom modeli
İzotoplar nötron sayısını, kütleyi ve kararlılığı değiştirir; nötr bir atomun elektron dizilimini değiştirmez.
Şematik atom modeli, ölçekli değildir.
Atomik Parmak İzi
Emisyon / Soğurma Spektrumu
İzotop Dağılımı
| Kütle numarası | Atom kütlesi (u) | Doğal bolluk | Yarı ömür |
|---|---|---|---|
| 46 Kararlı | 45,95262772 ± 0,00000035 | 8,2500% | Kararlı |
| 47 Kararlı | 46,95175879 ± 0,00000038 | 7,4400% | Kararlı |
| 48 Kararlı | 47,94794198 ± 0,00000038 | 73,7200% | Kararlı |
| 49 Kararlı | 48,94786568 ± 0,00000039 | 5,4100% | Kararlı |
| 50 Kararlı | 49,94478689 ± 0,00000039 | 5,1800% | Kararlı |
Faz / Hâl
Neden: erime noktasının (1667,85 °C) 1642,8 °C altında
Şematik, ölçekli değil
Faz geçiş noktaları
Geçiş enerjileri
Erime noktasında 1 mol maddeyi eritmek için gereken enerji
Kaynama noktasında 1 mol maddeyi buharlaştırmak için gereken enerji
Süblimleşme noktasında 1 mol maddeyi süblimleştirmek için gereken enerji
Yoğunluk
Standart koşullarda
Standart koşullarda
Atomik Spektrumlar
22 kayıttan 10 tanesi gösteriliyor. İyon yüküne göre sıralandı (artan).
Spektral Çizgi Kayıtları ?
| İyon | Yük | Toplam çizgi sayısı | Geçiş olasılıkları | Düzey gösterimleri |
|---|---|---|---|---|
| Ti I | 0 | 4029 | 496 | 4029 |
| Ti II | +1 | 1872 | 470 | 1872 |
| Ti III | +2 | 819 | 297 | 819 |
| Ti IV | +3 | 86 | 39 | 86 |
| Ti V | +4 | 252 | 4 | 252 |
| Ti VI | +5 | 71 | 14 | 71 |
| Ti VII | +6 | 92 | 13 | 92 |
| Ti VIII | +7 | 85 | 37 | 85 |
| Ti IX | +8 | 85 | 50 | 85 |
| Ti X | +9 | 162 | 78 | 162 |
Enerji Düzeyi Kayıtları ?
| İyon | Yük | Düzeyler |
|---|---|---|
| Ti I | 0 | 559 |
| Ti II | +1 | 253 |
| Ti III | +2 | 200 |
| Ti IV | +3 | 40 |
| Ti V | +4 | 66 |
| Ti VI | +5 | 59 |
| Ti VII | +6 | 62 |
| Ti VIII | +7 | 44 |
| Ti IX | +8 | 32 |
| Ti X | +9 | 83 |
İyon Yarıçapları
| Yük | Koordinasyon | Spin | Yarıçap |
|---|---|---|---|
| +2 | 6 | Mevcut değil | 86 pm |
| +3 | 6 | Mevcut değil | 67 pm |
| +4 | 4 | Mevcut değil | 42 pm |
| +4 | 5 | Mevcut değil | 51 pm |
| +4 | 6 | Mevcut değil | 60.5 pm |
| +4 | 8 | Mevcut değil | 74 pm |
Bileşikler
İzotoplar (5)
Natural titanium consists of five isotopes with atomic masses from 46 to 50. All are stable. Eight other unstable isotopes are known.
| Kütle numarası | Atom kütlesi (u) | Doğal bolluk | Yarı ömür | Bozunma türü | |
|---|---|---|---|---|---|
| 46 Kararlı | 45,95262772 ± 0,00000035 | 8,2500% ± 0,0300% | Kararlı | stable | |
| 47 Kararlı | 46,95175879 ± 0,00000038 | 7,4400% ± 0,0200% | Kararlı | stable | |
| 48 Kararlı | 47,94794198 ± 0,00000038 | 73,7200% ± 0,0300% | Kararlı | stable | |
| 49 Kararlı | 48,94786568 ± 0,00000039 | 5,4100% ± 0,0200% | Kararlı | stable | |
| 50 Kararlı | 49,94478689 ± 0,00000039 | 5,1800% ± 0,0200% | Kararlı | stable |
Spektral Çizgiler
1717 kayıttan 50 tanesi gösteriliyor. Varsayılan olarak yalnızca şiddeti ölçülmüş spektral çizgiler gösterilir.
| Dalga boyu (nm) | Şiddet | İyonlaşma aşaması | Tür | Geçiş | Doğruluk | Kaynak | |
|---|---|---|---|---|---|---|---|
| 521.03843 nm | 21000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3F* | Ölçülmüş | NIST | |
| 506.46526 nm | 17000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3D* | Ölçülmüş | NIST | |
| 519.29686 nm | 17000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3F* | Ölçülmüş | NIST | |
| 517.37431 nm | 15000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3F* | Ölçülmüş | NIST | |
| 498.17305 nm | 14000 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 503.99574 nm | 14000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3D* | Ölçülmüş | NIST | |
| 468.19089 nm | 13000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3G* | Ölçülmüş | NIST | |
| 499.1066 nm | 13000 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 499.9503 nm | 12000 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 501.41861 nm | 11000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3D* | Ölçülmüş | NIST | |
| 399.86363 nm | 10000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(1P*) y 3F* | Ölçülmüş | NIST | |
| 466.75845 nm | 10000 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3G* | Ölçülmüş | NIST | |
| 500.72093 nm | 10000 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 453.32394 nm | 9200 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 398.17616 nm | 8800 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(1P*) y 3F* | Ölçülmüş | NIST | |
| 398.97582 nm | 8800 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(1P*) y 3F* | Ölçülmüş | NIST | |
| 501.42762 nm | 8700 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 395.82055 nm | 8600 | Ti I | emission | 3d2.4s2 a 3F → 3d3.(4F).4p y 3D* | Ölçülmüş | NIST | |
| 465.64693 nm | 8400 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(3P*) z 3G* | Ölçülmüş | NIST | |
| 395.63338 nm | 8000 | Ti I | emission | 3d2.4s2 a 3F → 3d3.(4F).4p y 3D* | Ölçülmüş | NIST | |
| 453.47761 nm | 7900 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 394.86705 nm | 7000 | Ti I | emission | 3d2.4s2 a 3F → 3d3.(4F).4p y 3D* | Ölçülmüş | NIST | |
| 484.08737 nm | 6600 | Ti I | emission | 3d2.4s2 a 1D → 3d2.(1D).4s.4p.(1P*) y 1D* | Ölçülmüş | NIST | |
| 430.59074 nm | 6400 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p x 5D* | Ölçülmüş | NIST | |
| 453.55686 nm | 6100 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 394.77683 nm | 5700 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(1D).4s.4p.(3P*) 3P* | Ölçülmüş | NIST | |
| 502.00263 nm | 5100 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 430.10787 nm | 4900 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p x 5D* | Ölçülmüş | NIST | |
| 503.5903 nm | 4900 | Ti I | emission | 3d3.(4F).4s b 3F → 3d3.(4F).4p w 3G* | Ölçülmüş | NIST | |
| 502.28679 nm | 4800 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 453.59176 nm | 4700 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 430.05538 nm | 4400 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p x 5D* | Ölçülmüş | NIST | |
| 453.60403 nm | 4000 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 503.64639 nm | 4000 | Ti I | emission | 3d3.(4F).4s b 3F → 3d3.(4F).4p w 3G* | Ölçülmüş | NIST | |
| 501.61609 nm | 3800 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 451.8022 nm | 3700 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 488.50794 nm | 3700 | Ti I | emission | 3d3.(2G).4s a 3G → 3d3.(2G).4p y 3H* | Ölçülmüş | NIST | |
| 392.45264 nm | 3600 | Ti I | emission | 3d2.4s2 a 3F → 3d3.(4F).4p y 3D* | Ölçülmüş | NIST | |
| 402.45711 nm | 3600 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(1P*) y 3F* | Ölçülmüş | NIST | |
| 390.47826 nm | 3500 | Ti I | emission | 3d2.4s2 a 1D → 3d2.(1D).4s.4p.(1P*) y 1F* | Ölçülmüş | NIST | |
| 452.2797 nm | 3500 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 502.48444 nm | 3500 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5G* | Ölçülmüş | NIST | |
| 398.24811 nm | 3400 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3P).4s.4p.(3P*) z 5S* | Ölçülmüş | NIST | |
| 454.87635 nm | 3400 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 455.24533 nm | 3400 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p y 5F* | Ölçülmüş | NIST | |
| 400.89274 nm | 3300 | Ti I | emission | 3d2.4s2 a 3F → 3d2.(3F).4s.4p.(1P*) y 3F* | Ölçülmüş | NIST | |
| 503.83979 nm | 3300 | Ti I | emission | 3d3.(4F).4s b 3F → 3d3.(4F).4p w 3G* | Ölçülmüş | NIST | |
| 392.98737 nm | 3200 | Ti I | emission | 3d2.4s2 a 3F → 3d3.(4F).4p y 3D* | Ölçülmüş | NIST | |
| 429.86657 nm | 3200 | Ti I | emission | 3d3.(4F).4s a 5F → 3d3.(4F).4p x 5D* | Ölçülmüş | NIST | |
| 489.99088 nm | 3200 | Ti I | emission | 3d3.(2G).4s a 3G → 3d3.(2G).4p y 3H* | Ölçülmüş | NIST |
Genişletilmiş Özellikler
Kovalent Yarıçaplar (Genişletilmiş)
- Kovalent yarıçap (Pyykkö)
- 136 pm
- Kovalent yarıçap (Pyykkö, çift bağ)
- 117 pm
- Kovalent yarıçap (Pyykkö, üçlü bağ)
- 108 pm
- Kovalent yarıçap (Bragg)
- 140 pm
Van der Waals Yarıçapları
- Batsanov
- 215 pm
- Alvarez
- 246 pm
- UFF
- 317,5 pm
- MM3
- 239 pm
Atom ve Metalik Yarıçaplar
- Atom yarıçapı (Rahm)
- 257 pm
- Metalik yarıçap (C12)
- 147 pm
Numaralandırma Ölçekleri
- Mendeleev
- 43
- Pettifor
- 51
- Glawe
- 51
Elektronegatiflik Ölçekleri
- Ghosh
- 0
- Miedema
- 4
- Gunnarsson–Lundqvist
- 5
- Robles–Bartolotti
- 4
Kutuplanabilirlik ve Dispersiyon
- Dipol kutuplanabilirliği
- 100 a.u.
- Dipol kutuplanabilirliği (belirsizlik)
- 10 a.u.
- C₆
- 1044 Ha·Bohr6
- C₆ (Gould–Bučko)
- 1200 Ha·Bohr6
Kimyasal İlgi
- Proton ilgisi
- 876 kJ/mol
- Gaz fazı bazlığı
- 853,7 kJ/mol
Miedema Parametreleri
- Miedema molar hacmi
- 10,58 cm3/mol
- Miedema elektron yoğunluğu
- 4
Tedarik Riski ve Ekonomi
- Üretim yoğunlaşması
- 21
- Göreli tedarik riski
- 5
- Rezerv dağılımı
- 29
- Siyasi istikrar (en büyük üretici)
- 81
- Siyasi istikrar (en büyük rezerv sahibi)
- 24
Faz Geçişleri ve Allotroplar
| Erime noktası | 1943,15 K |
| Kaynama noktası | 3560,15 K |
Yükseltgenme Basamağı Kategorileri
İleri Düzey Referans Verileri
Perdeleme Sabitleri (7)
| n | Orbital | σ |
|---|---|---|
| 1 | s | 0,5591 |
| 2 | p | 3,9352 |
| 2 | s | 6,6234 |
| 3 | d | 13,8586 |
| 3 | p | 11,8963 |
| 3 | s | 10,9669 |
| 4 | s | 17,1832 |
Kristal Yarıçaplarının Ayrıntıları (6)
| Yük | CN | Spin | rcrystal (pm) | Köken |
|---|---|---|---|---|
| 2 | VI | 100 | estimated, | |
| 3 | VI | 81 | from r^3 vs V plots, | |
| 4 | IV | 56 | calculated, | |
| 4 | V | 65 | calculated, | |
| 4 | VI | 74,5 | from r^3 vs V plots, | |
| 4 | VIII | 88 | calculated, |
İzotop Bozunma Türleri (47)
| İzotop | Mod | Şiddet |
|---|---|---|
| 37 | p | — |
| 38 | 2p | — |
| 39 | B+ | 100% |
| 39 | B+p | 93,7% |
| 39 | 2p | — |
| 40 | B+ | 100% |
| 40 | B+p | 95,8% |
| 41 | B+ | 100% |
| 41 | B+p | 91,1% |
| 42 | B+ | 100% |
X Işını Saçılma Faktörleri (530)
| Enerji (eV) | f₁ | f₂ |
|---|---|---|
| 10 | — | 1,51668 |
| 10,1428 | — | 1,54246 |
| 10,3068 | — | 1,57217 |
| 10,4735 | — | 1,60245 |
| 10,6429 | — | 1,63331 |
| 10,8151 | — | 1,66477 |
| 10,99 | — | 1,70636 |
| 11,1677 | — | 1,75257 |
| 11,3484 | — | 1,80003 |
| 11,5319 | — | 1,84878 |
Ek Veriler
Estimated Crustal Abundance
The estimated element abundance in the earth's crust.
5.65×103 milligrams per kilogram
Kaynaklar (1)
- [5] Titanium https://education.jlab.org/itselemental/ele022.html
Estimated Oceanic Abundance
The estimated element abundance in the earth's oceans.
1×10-3 milligrams per liter
Kaynaklar (1)
- [5] Titanium https://education.jlab.org/itselemental/ele022.html
Sources
Sources of this element.
Titanium is present in meteorites and the sun. Rocks obtained during the Apollo 17 lunar mission showed presence of 12.1% TiO2; rocks obtained during earlier Apollo missions show lower percentages.
Titanium oxide bands are prominent in the spectra of M-type stars. The element is the ninth most abundant in the crust of the earth. Titanium is almost always present in igneous rocks and in the sediments derived from them.
It occurs in the minerals rutile, ilmenite, and sphene, and is present in titanates and in many iron ores. Titanium is present in ash of coal, in plants, and in human body.
The metal was a laboratory curiosity until Kroll, in 1946, showed that titanium could be produced commercially by reducing titanium tetrachloride with magnesium. This method is still largely used for producing the metal. The metal can be purified by decomposing the iodide.
Kaynaklar (1)
- [6] Titanium https://periodic.lanl.gov/22.shtml
Kaynaklar
(9)
Data deposited in or computed by PubChem
The half-life and atomic mass data was provided by the Atomic Mass Data Center at the International Atomic Energy Agency.
Element data are cited from the Atomic weights of the elements (an IUPAC Technical Report). The IUPAC periodic table of elements can be found at https://iupac.org/what-we-do/periodic-table-of-elements/. Additional information can be found within IUPAC publication doi:10.1515/pac-2015-0703 Copyright © 2020 International Union of Pure and Applied Chemistry.
The information are cited from Pure Appl. Chem. 2018; 90(12): 1833-2092, https://doi.org/10.1515/pac-2015-0703.
Thomas Jefferson National Accelerator Facility (Jefferson Lab) is one of 17 national laboratories funded by the U.S. Department of Energy. The lab's primary mission is to conduct basic research of the atom's nucleus using the lab's unique particle accelerator, known as the Continuous Electron Beam Accelerator Facility (CEBAF). For more information visit https://www.jlab.org/
The periodic table at the LANL (Los Alamos National Laboratory) contains basic element information together with the history, source, properties, use, handling and more. The provenance data may be found from the link under the source name.
The periodic table contains NIST's critically-evaluated data on atomic properties of the elements. The provenance data that include data for atomic spectroscopy, X-ray and gamma ray, radiation dosimetry, nuclear physics, and condensed matter physics may be found from the link under the source name. Ref: https://www.nist.gov/pml/atomic-spectra-database
This section provides all form of data related to element Titanium.
The element property data was retrieved from publications.